Latest polish work Tenders | Government polish work Tenders

Central Government/Public Sector

CTN :40077304

15 May, 2025 NA

Multi City - Multi State

Tender For hot dip galvanizing as per rdso specs eti-ohe-13(4/84) on the set of ground connections drg. no. rdso/s3361-62 and the mass of the zinc coating shall not be less than 610 gm/sq.mtrs., including necessary surface preparation as per clause-4 of is:2629-1985 or latest.

State Government

CTN :40052483

23 Apr, 2025 22.83 Lacs

Jaipur - Rajasthan

Tender For others miscellaneous works - sealer coating on rammed earth wall, bamboo jali paint &amp water proofing on kellu tile roof top at gandhi vatika central park, jaipur

State Government

CTN :40081503

28 Apr, 2025 15.30 Lacs

Delhi - Delhi

Tender For operation and maintenance of street light under north east area at vrs locations in trans yamuna area under pwd m- 251 delhi (sh- supplying and coating electrical insulation of street light poles under sd-1/m-2511 delhi.)

corporations/Associations/Others

CTN :40013897

28 Apr, 2025 NA

Mettur - Tamil Nadu

Tender For corrigendum : mtps i tm unit iii inspection of condenser tubes flaring and torque setting by using special tools tube sheets cleaning degreasing and epoxy coating to the thickness of 1500 microns on condenser tube sheets of the condenser

Central Government And Public Sector

CTN :40081324

30 Apr, 2025 NA

Multi City - Multi State

Tender For supply of hex head bolt m16x70 high tensile. materials and specification as per is:1364 (part -1)- 2002, ce with property class 10.9 to is: 1367 (part -3)-2002 coating as per mdts-057make:-tvs/tuff/dfl/unbrako and all approved vendors for axle end steel high tensile cap screws to be used in end holes of bg freight axles ( item id-3100249, sub item id 3100249002 or 3100249003) borne in the rdso approved vendor list available on uvam portal.

Central Government/Public Sector

CTN :40065079

28 Apr, 2025 NA

Haridwar - Uttarakhand

Tender For tender for supply of washer 22x33 (for round/cheese head screw of size-m20)as per is-2016 type-b). equivalent standard din 433/iso 7092/ uni 6592 also acceptable , material-steel r80(carbon steel having min. uts-785 mpa , hardness class- 200 hv) , finish -zinco-nickel , , dimension , ohter details as per governing std , washer 6.6x12.5 (for hex head screw of size-m6)as per uni 6593 or equivalnet std. din 125a/iso-7089/is-2016(type -a)also acceptable , material- steel hardness class 140hv , coating-zinco-nickel , dimension , tolerance and details as per governing standard dim.- idxod , washer 9 x 17 (for hex head screw of size-m8)as per uni 6593 or equivalnet std. din 125a/iso-7089/is-2016(type -a)also acceptable , material- steel hardness class 140hv , coating-zinco-nickel , dimension , tolerance and details as per governing standard dim.- idxod , punched washer 18 x 30 type a as per is-2016 (for screw m16) material- steel 100hv finish- cadmium chromated or zinc-nickel or zinc blue- washer as per din 126 also acceptable n.std-is-2016 dim.- idxod , tab washer nominal size-13 type a (suitable for bolt size m12)as per is-8068/ din 93/uni 6600 , material-steel (having tensile strength-294-490n/mm2 , hrb- less than 73) , finish- cadmium cromated or zinconickel , dimensions , tolerances and general requirements as per is-8068/ din 93/uni 6600 , tab washer(with long tab) size -8.4 (suitable for bolt size- m8) as per is-8068 , type-a/ din 93/uni 6600 , material- steel(having tensile strength -294-490n/mm2 , hrb-less than 73) , finish-zinco- nickel , dimension , tolerances and general requirement as per govening standatd , tab washer , type a(with long tab , size-10.5 (suitable for bolt size m10) as per is-8068/ din 93/uni6600 , material-steel (having tensile strength- 294-490n/mm2 , hrb-less than 73) , finish- cadmium cromated or zinco- nickel , dimensions , tolerances and general reqmt. as per governing standard. , tab washer , type a(with long tab , size-15 (suitable for bolt size m14) as per is-8068/ din 93/uni6600 , material-steel (having tensile strength- 294-490n/mm2 , hrb-less than 73) , finish- cadmium cromated or zinco- nickel , dimensions , tolerances and general reqmt. as per governing standard , tab washer(with long tab) size -21 (suitable for bolt size- m20) as per is-8068 , type-a/ din 93/uni 6600 , material- steel(having tensile strength -294-490n/mm2 , hrb-less than 73) , finish-zinco- nickel , dimension , tolerances and general requirement as per govening standatd , lock washer with lug(external tab) , nominal size-21(for screw size-m20) as per is 5554/ din 432/uni 6599 , material-steel( having tensile strength- 294- 490n/mm2 , hrb-less than 73) , finish- cadmium cromated or zinco- nickel , dimensions , tolerances and general reqmt. as per governing standard , lock washer with lug(external tab) , nominal size-13(for screw size-m12) as per is 5554/ din 432/uni 6599 , material-steel( having tensile strength- 294- 490n/mm2 , hrb-less than 73) , finish- cadmium cromated or zinco- nickel , dimensions , tolerances and general reqmt. as per governing standard , plain wahser (6.4x18)for screw /bolt size- m6 as per is-5370/ iso 7093/ din- 9021/uni-6593 (od about 3 times id) , mat- steel , hardness class-140-250hv , finish-zinco-nickel , dimension , tolerance and other details as per governing standard. , flat washer (for clevis pin) , id- 4 mm (for pin size-4mm) as per din 1440/ iso 8738 , material- steel , finish-zinconickel , dimension , tolerance and other technical details per governing standard , flat washer (for clevis pin) , id- 5 mm (for pin size-5mm) as per din 1440/ iso 8738 , material-steel , finish-zinconickel , dimension , tolerance and other technical details per governing standard , flat washer (for clevis pin) , id- 6 mm (for pin size-6mm) as per din 1440/ iso 8738 , material-steel , finish-zinconickel , dimension , tolerance and other technical details per governing standard , flat washer (for clevis pin) , id

Central Government/Public Sector

CTN :40065675

28 Apr, 2025 88.57 Lacs

Haridwar - Uttarakhand

Tender For tender for supply of chesterton 775 or 740 protective oil aerosol spray 300gm or equivalent mil-prf16173-gr.3 spray- clear , moisture-displacing , anticorrosion , fulcron degreaser super concentrate spray cod.1992 , 500ml spray bottle , wd-40 degreasing and protective spray in 400ml can with extended straw for accurate application , protective oil as per mil-c-81309e or aviprotec 8130 or equivalent , chesterton 900 goldend paste pack in 200g tube , crc super cut 2 - lubricant pack in 250 ml spray bottle , spray crc 6-66 alternate- crc 5-56 size- p-n 157692145 , spray electronic cleaner size- p-n 157692146 , grease molykote g-4501 , 1kg pack , grease molykote bg-555 pack in 1 kg tin , grease as per mil-prf 81322 g , nato code g-395 , nycogrease gn 22 packed in 1 kg , grease molykote 55m pack in 1 kg tin size- 100010132 , grease as per mil-prf-10924 or equivalent in 5kg pack , molykote d-321r anti friction coating spray in can of 400ml , molykote hsc plus paste in 1 kg pack , grease fag bearing arcanol temmp110 or equivalent 400gm cartridge , tw-25b or mascherpa emax hg200-5 kg , mastinox ca1010 chromate free jointing compound packing of 160 ml (substitute for mastinox6856k) n.std-mil-prf-8116 size- mstinox ca1010 , loctite grade 401 super glue instant adhesive in 20gm pack , dow corning 732 multi purpose silicone sealant 300ml pack , sikaflex 291 white adhesive - 300 ml pack , sikaflex 291 black adhesive 300 ml pack , scotch 3m 847 rubber & gasket adhesive in 150 ml pack , huntsman araldite-2011 in 50ml cartridge , electrical rubber splicing tape , colour black , size 25mmx7m , thickness-0.76mm , material-self-amalgamating epr (ethylene propylene rubber) , operting temp-130deg.c. model no-3m scotch 23 or equivalent , interflon mp00 grease in 1 litre pack , oil as per mil-l-6086 grade l , preservative oil as per mil-l-3150 , grease as per dod-l-25681 , hydraulic fluid as per mil-dtl-17111c.nato code h-575 hydraunycoil fh 19 packed in 5 ltr. container n.std-mil-dtl-17111 , hydraulic fluid as per mil-prf-5606h , nato code h-515 hydraunycoil fh 51 , packed in 5 ltr. container n.std-mil-prf-5606 , lubricating oil as per vv-l-800c amd1 nato code o-190 nycolube 30 packed in 5 ltr container n.std-vv-l-800 , grease as per mil-g-21164d , nato code g-353 nycogrease gn 17 , packed in 3 kg tin n.std-mil-g-21164 , grease as per mil-prf-24139a , nato code g-450 nycogrease gn 85 , packed in 0.5 kg tin n.std-mil-g-24139

Central Government/Public Sector

CTN :40054685

03 May, 2025 1.84 Crore

Korba - Chhattisgarh

Tender For external weather coating of residential qtrs. in different type colonies under cws-cs, korba.

Central Government/Public Sector

CTN :40077383

12 May, 2025 NA

Jhunjhunu - Rajasthan

Tender For supply of cast iron welding electrode,cast iron welding electrode,welding electrode for jointing and building,medium coated general purpose all position electrode for welding,medium coated general purpose all position electrode for welding,ss welding electrode forjointing and surfacing of high carbon,ss welding electrode forjointing and surfacing of high carbon,special manualelectrode giving veryhigh strength joints with excellent,castiron welding electrode usefor jointing coating and buildingup,chamfer electrode e900 lotherme 802 chamfertrode terrogrove,cut rod electrode e901 lotherme 801 cuttrode terrocut

Central Government / Public Sector

CTN :40077752

13 May, 2025 NA

Multi City - Multi State

Tender For "supply and application of epoxy heavy duty, non-inflammable and water proof coating over the welded joints on all types of eligible wagons" qty-9,600 running meters at wagon workshop, guntupalli, south central railway for a period of 24 months.

Polish Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors