Latest polisher machine repair Tenders | Government polisher machine repair Tenders

Central Government/Public Sector

CTN :45602998

25 Jun, 2026 NA

Ranga Reddy-T - Telangana

Tender For providing of customized annual maintenance contract/cmc for pre-owned products - non-comprehensive annual maintenance contract of industrial chillers of 5 tr capacity of qty: 3 no-s as per given specifications at annexure-i, essential terms and conditions at annexure-ii, equipment deatils at annexure-iii for..,customized annual maintenance contract/cmc for pre-owned products - non-comprehensive annual maintenance contract of industrial chillers of 7 point 5 tr capacity of qty: 1 no as per given specifications at annexure-i, essential terms and conditions at annexure-ii, equipment deatils at annexure-i..,customized annual maintenance contract/cmc for pre-owned products - non-comprehensive annual maintenance contract of industrial chillers of 10 tr capacity of qty: 2 no-s as per given specifications at annexure-i, essential terms and conditions at annexure-ii, equipment deatils at annexure-iii fo..,customized annual maintenance contract/cmc for pre-owned products - non-comprehensive annual maintenance contract of industrial chillers of 15 tr capacity of qty: 7 no-s as per given specifications at annexure-i, essential terms and conditions at annexure-ii, equipment deatils at annexure-iii fo..,customized a

Central Government/Public Sector

CTN :45587871

08 Jul, 2026 NA

Ranga Reddy-T - Telangana

Tender For supply of boot card-486, p/no: vvl-boot-486-01 , boot card- 386, p/no: vvl-boot-386-01, i&o l , pentium 4 industrial computer including cpu 17" colout monitor, keyboard & mouse p/no: controller ma , i level test equipment for rc-2, rc-2 loop back tester p/no: rmaf-rc2-ts accessories are given below , rc2 chassis with m/b, cpu card and power supply p/no. vvl-rc-ii ga-006-001

Central Government And Public Sector

CTN :45609083

09 Jul, 2026 NA

Kalpakkam - Tamil Nadu

Tender For providing of facility management services - lumpsum based - industrial; experience in non destructive testing by ultrasonic thickness gauging or ultrasonic flaw detection of mechanical equipment or mechanical structure or pipe in any power or process industry; co..

CTN :45281561

20 Jun, 2026 59.46 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For bid to ras tender for supply of fixing self regulating heat tape cable insulation and accessories in ppr pipe - providing and fixing self regulating heat tape resistance heating cable suitable to protect freezing of water in pipelines having rated output of 35 w per meter at 220 v ac supply the heating cable shall have capabibility to automatically adjust its heat output based on surrounding temperature conditions to prevent freezing and overheating the cable should be suitable for continuous operation in outdoor in adverse climatic conditions flexible for installation around pipelines joints and valves and compatible with temperature controller systems , providing m20 3 pin connector suitable for making secure electrical joints between self regulating heat cable terminals designed for reliable power and signal continuity the connector should be operable for operation at rated 220 v ac supply and compatible with heating cables of specified capacity must l ensure safe and firm termination with robust insulation to prevent moisture ingress short circuits and electrical leakage the connector shall be made up from high-quality weather resistant materials suitable for continuous outdoor operation under adverse environmental conditions it should be ease in installation with a compact and durable design for use in pipeline joints terminations and interconnections the connector should be compatible with temperature control systems and associated accessories ensuring long term performance safety and protection against overheating corrosion and mechanical stress , providing temperature differential controller with auto and manual operation housed in a robust ip65 rated enclosure suitable for controlling heat tracing systems to prevent freezing of water in pipelines and utilities the controller should be capable to automatically switch the heat tape on off based on preset temperature differentials ensuring optimal performance and energy efficiency the controller should have in built safety features such as overrun protection and burn out protection to safeguard the heating cable and associated equipment from damage the enclosure shall be weatherproof and suitable for outdoor installation offering protection against dust and water ingress and ensuring reliable long term operation under harsh environmental conditions , providing pt100 temperature sensors with 10 metre cable suitable for accurate temperature measurement and control in heat tracing and pipeline monitoring applications the sensors should be made up of platinum resistance type pt100 ensuring high precision stability and reliability over a wide temperature range the wire with sensor should have high quality insulation suitable for reliable signal transmission and compatible with temperature controllers and monitoring systems the cable shall be durable flexible and suitable for installation in outdoor under extreame weather conditions in high altitude area , providing 3 core 1.5 sq mm pvc insulated and pvc round sheathed multicore flexible cable comprising bright annealed bare copper conductors suitable for heavy duty industrial applications rated for voltage grade up to 1100 volts the cable shall confirm to requirements of is 694 2010 the conductors shall be made of high-conductivity annealed copper ensuring efficient current carrying capacity and minimal losses each core shall be uniformly insulated with high-quality pvc compound and the overall cable shall be protected with a durable pvc outer sheath providing resistance against moisture abrasion and mechanical stresses the cable shall be flexible in nature allowing ease of installation in confined and complex routing conditions it should be suitable for continuous operation in indoor and outdoor adverse environments offering reliable performance electrical safety and long service life

CTN :45591894

01 Jul, 2026 NA

Dehradune - Uttarakhand

Tender For e tender for supply of cleaning equipment used in health stores for the financial year 2026-27 - long-handle grass broom (approx. 6.5 to 8 feet); soft-bristle 'phool' broom (approx. 42 inches); high-quality round/long toilet brush; floor wiper (small); floor wiper (large); mop (1.20 x 1.20); dustbin (80l - cello, nilkamal, or similar); dustbin (60l - cello, nilkamal, or similar); dustbin (40l - cello, nilkamal, or similar); open-top dustbin with wheels (120l); 10x6x10 cm dimensions (small); two-bin stand. 500x500mm bottom, 350x350mm height, 690mm structure, 250x250mm lid; ms powder-coated body; 1mm thickness; 100x100mm base; heavy-duty construction; corrosion-resistant; 80-liter capacity; two-bin stand; dimensions: 300x300mm. 500x500mm foot-operated bin, 350x350mm height bin, 690mm structure bin, 250x250mm stackable bin, heavy-duty ms sheet bin (1mm thick), 100x100mm pvc pipe for waste disposal, 100-liter waste collection bucket, 25-liter plastic bucket, 120-liter biodegradable bags (all colors), 80-liter biodegradable bags (all colors), 60-liter biodegradable bags (all colors), emergency torch, battery capacity 4500mah, 2-stage light output (high/low), rubber gloves, industrial grade (size 6, 7, 8), apron, face shield (14cm x 27cm, 0.15mm thick), raincoat. दपहु कमीतंकनाद सवहव ब्सवस्वत दानल इसनम् न्दक हंतल 1ज लतंकम चलसवदाये बुवीपदंजमक तिवदज न्दक इंबा चंतजन ज़ादमे पद उु.0.17 जव 0.20 मैफ़ीज व विविन्जमक निटपब 170 जव 200हु स्मिस इत्दक दुम न्दक प्रम्ये चांपदाह ब्वमते तमसिमब्जप्म जंचम न्ज इंबा पद 2ष पक्कजी प्रप्रम.डे त्मप्डबंजक पूपजी दंहंत दपहु कमतंकनद सवहव ब्सवत दंल इसनम् न्दक हन्तल 1एज लटंकम छलसवड़ी ब्वुईपडंजक तिवज़्दक दंक छंतजन जीदमे पद उु.0.17 जव 0.20 मपहिज व बिविन्जमक नित्पब 170 जव 200 हु स्मिस इतंदक दुमंडक प्रमे चांपदह ववम्ते तमसिमब्जप्जम जंचम न्ज इंबा प्द 2ष झूपक्जी प्रम.से त्मपदब्वंज पूपजी दहंत दपहु कमीतंकनद सहव व्वस्वत दानल इसनम् न्दक हंतल 1एज लतंकम चलसविदाये बुवीपदंजमक तिवदज न्दक इंबा चंतजन् जिदमे पद उु.0.17 जव 0.20 मपहीज व विविन्जमक नित्पब 170 जव 200hau samsung galaxy a series, galaxy m series, galaxy s series (s series pre-installed, android 6.6.5; galaxy s series pre-installed, android 7.8; galaxy s series pre-installed, android 8.5.9.5); trash bin usage: 15l; surgical mask (white and light blue), universal (17cm x 9cm) type; triple-layer melt-blown fabric. certified by iso; pvc gumboots (height 250mm), pvc sole, black color, oil-resistant. full-size apron, n-95 mask (95% filtration efficiency), splash-resistant material. standard: 100% polyester and certified by iso. knapsack sprayer (16l/20l); hand-operated/battery-operated sprayer (16l/20l/50l/67l); spray machine (manual/battery/petrol engine 20l); thermal fogging machine (manual & self-start, 5l tank, flow rate 842 lmh, push-button start, 12v rechargeable battery, weight 9 kg); solution tank (8l); duster (18x18); spade (8" long, 9" wide, approx. 1 kg); wide shovel (high quality); crowbar (solid ms rod, 5' length, 6 kg); rake (25x5 mm, 4-prong, 12" length, 1.5 kg, with 5' handle); sickle/billhook (25x5 mm blade, 3" & 9" lengths, round handle, 1 kg); pickaxe (2 kg, with handle); long-handled hoe. grass cutting machine (brush cutter): 52cc, 7800 rpm, 4-stroke, 650ml capacity, weight 7 kg (including handle); includes double-lock trimmer head and cutting wire; manual three-wheeler (rickshaw) – specifications: chassis, tubeless tires (22-ply), 16-spoke wheels, heavy-duty rims, thick iron body with 6-gauge base, body height 45 inches, 1-inch angle iron frame, 1.5-inch round axle, openable cargo bed, bell/horn on handle; complete unit including paint, finish, and lettering; hand cart – 1.10 ft wide, 1 ft deep, 3 ft long (specifications distinct from the above), constructed from 16-gauge ms sheet, t-iron wheels, 1.5 ft diameter...8-spoke 1-inch wheel, 5mm thickness, axle with 1.5-inch bush. trolley frame made of 35x5x35 angle iron; support provided underneath using 1-inch x 1.5-sut flat strip; 1.0-foot stand; trolley complete with paint, varnish, and lettering. han

Central Government/Public Sector

CTN :45329483

24 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu

Central Government/Public Sector

CTN :45555987

08 Jul, 2026 NA

Palakkad - Kerala

Tender For high pressure jet cleaning machine working pressure: 200-250 bar water flow rate: 900-1100 liters/hour steam temperature (if applicable): 140-155 degree celsius hot water output temperature: 85-90 degree celsius suction height (from water source): minimum 0.5 m pump specifications critical for durability and pressure stability. pump type: triplex plunger pump pump speed: around 1450 rpm number of pistons: 3 piston material: ceramic minimum feed pressure: 6-8 bar motor & electrical specificationsdefines power and efficiency. power supply: electrical phase: single phase / three phase motor rating: around 7-7.5 kw protection class: ipx5 or higher automatic pressure cut-off: yes heating system (for hot water models) optional but essential for grease removal. burner type: diesel / electric burner power: 60-90 kwfuel tank capacity: around 20 liters detergent tank capacity: around 20 liters hose, gun & lance user interaction components. high-pressure hose length: 8-10 meters electrical cable length: 5 meters spray lance length: approx. 700 mm spray gun: standard high-pressure trigger gun quick-connect couplings: preferred construction & materials ensures robustness and long service life. chassis material: mild steel (industrial grade) body material: mild steel or corrosion-resistant metal wheels: solid rubber wheels frame design: compact, vibration-resistant safety & protection features mandatory for industrial equipment. thermal motor protection pressure relief valve overload protection weather-proof switches low-water cut-off (recommended) dimensions & weight affects portability and storage. weight (without accessories): 140?150 kg mobility: trolley-mounted with heavy-duty wheels accessories (standard supply) high-pressure hose spray gunspray lance nozzle set detergent suction hose operating conditions operating temperature range: 0 degree celsius to 40 degree celsius environment: dusty, humid, industrial conditions [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45375385

23 Jun, 2026 2.11 Lacs

Guruvayur - Kerala

Tender For corrigendum : state plan-2025-26-guruvayur drainage scheme-providing occupational safety equipment and other protective measures-at sewerage treatment plant chakkamkandam guruvayur-general civil work - working charge, od223418/2025-2026:supplying safety helmet, od223411/2025-2026:supplying safety shoes(karam, hillson make), od223416/2025-2026:supplying gum boots (hillson make), od223410/2025-2026:supplying googles(3m make), od223414/2025-2026:supplying rechargeable torchlight (wipro make), od223417/2025-2026:supplying gloves (handling chemicals), od223407/2025-2026:supplying gloves(electrical) jupitor make, od223415/2025-2026:supplying cotton gloves, od223408/2025-2026:supplying reflective jackets, od223409/2025-2026:supplying first aid kit (industrial) class b, as per factory act 1948, od223449/2025-2026:supplying self contained breathing apparatus, od223412/2025-2026:supplying respirator(3m make), od223413/2025-2026:supplying dust mask(3m make), od223441/2025-2026:supplying fire extinguisher-6kg, od223440/2025-2026:electric shock resistance 12mm thick isi mark rubber mat

Central Government And Public Sector

CTN :45556247

22 Jun, 2026 NA

Bangalore - Karnataka

Tender For fuse hrc -16 a 1.current rating:16amperes(a) 2.voltage rating:415v ac.3.breaking capacity:80 ka at 415v ac.4.fuse type/series:ns type (compact dimension industrial fuse. mounting:offset tag/ blade tag(clip- on type).6.dimensions:f1size.7.compliance :conforming to is 13703/bs88/iec60269 or latest 8.isi marking:the product must bear the isi mark as proof of quality and safety compliance. 9.only original equipment manufacturers or their authorized dealers to quote.10.warranty:18 months from the date of supply or 12 months from the date of commissioning,whichever is earlier. ]

CTN :45439997

17 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of simulator workstation with rugged controller , drone simulator software licence standard , high fidelity simulator workstation with rugged controller , 3d simulation software licence advanced , vr headset 6 dof and sim compatible , trainer workstation with instructor simulator , 55 inch led display for trainer workstation , networking cabling and power management lan plus ups , workstation desk and ergonomic chair set , split air conditioner 1 and half ton , posters flex banners and cut section models , printer brother t4500 , high performance cad workstation , fdm 3d printer bambu h2d with ams combo , fdm 3d printer bambu h2s with ams combo , fdm 3d printer bambu x1 carbon with ams combo , filaments abs tpu pla plaplus assorted , filament dryer creality space pi x4 or equivalent , resin 3d printer prusa sl 1s or equivalent sla or msla with resin material , industrial 3d scanner creality otter or equivalent , laser engraver and cutter machine 40 watt , wooden tables chairs and workbenches set of 06 , power management fitting and backup inverter 2 kva , advanced drone repair equipment soldering station digital microscope esd mats oscilloscope , drone electronics sensors and spares kit , storage almirahs lockable , posters flex banners and cut section models , 3 axis drone stability test jig with proprietary software , bldc motor thrust test bench with proprietary software , drone sensor integration and testing equipment , gps testing equipment with proprietary software , flight controller assembly programming station , propeller balancer , battery charging and testing station , battery repair station , drone and 3d printer service tools , soldering and rework station yihua 982d iii or equivalet , esd workbenches , workstations for tuning or programming , line of sight trainer uav with controller , vtol trainer uav with mission planner tricopter or quadcopter , fixed wing trainer uav with mission planner , fixed wing vtol uav system with day and night camera dooaf module , day and night enabled quadcopter with dooaf capability , surveillance and payload delivery drone with mission planner hexacopter or octacopter , storage box for drones and accessories , storage almirahs , lab tables and workstations with storage , split air conditioner 2 ton , interactive panel 75 inch or larger 4k uhd, multi touch with ops , 55 inch led display , study chairs with ergonomic and stackable , split ac 1 and half ton , 20 day training programme for 15 individuals with flying repair fabrication with study material , soccer drones with propeller cage , soccer drone arena including netted enclosure with goal posts //bid details 2 / 41

Polisher Machine Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government And Public Sector