Latest poly can Tenders | Government poly can Tenders

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

State Government

CTN :45317219

28 May, 2026 NA

Multi City - Karnataka

Tender For al poly foil plain and blst al foil of assorted sizes.

Central Government/Public Sector

CTN :45318519

04 Jun, 2026 NA

Haridwar - Uttarakhand

Tender For supply of poly glass insulation tube (w98414301339)

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

State Government

CTN :44610811

28 May, 2026 7.00 Crore

Chandigarh - Chandigarh

Tender For bid to ras supply of poly-pallets for bag storage godowns (v2) conforming to is 13664 (q3)

State Government

CTN :44699881

27 May, 2026 6.55 Crore

Delhi - Delhi

Tender For bid to ras supply of poly-pallets for bag storage godowns (v2) conforming to is 13664 (q3)

Central Government And Public Sector

CTN :45153407

15 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For corrigendum : supply of polyring for constant contact poly urethene (pu) side bearer pad of boxnhl wagons as per drg.no.aal-021101, alt-8, item no.05. material and specification as per wd-38-misc-2004, rev3. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45027204

27 May, 2026 NA

Delhi - Delhi

Tender For bid to ras supply of boq boq d d - sk/alh/dsf/051 , loom-afcs pod/dts , tygonf4040a1/8x1/16in , tube tygon(foot) , 47201035 , common screw driver , exp/h/niv5 , poly bag size 6 x8 , ty 23 m , tyrap

CTN :44983230

27 May, 2026 NA

Delhi - Delhi

Tender For bid to ras supply of esd workstations,chair for general purpose,executive table (v4),revolving chair (v5),executive table (v4),revolving chair (v5),sofa set or couch (handicraft) (v2),table (handicraft) (v2),sofa set or couch (handicraft) (v2),table (handicraft) (v2),modular extendable conference table (v2),table (handicraft) (v2),panel air conditioner,professional large format display (v2),professional large format display (v2),household refrigerating appliances as per is 17550,portable electric indoor air purifier conforming to is 17531,household refrigerating appliances as per is 17550,waste container (v3),mobile containers for solid waste conforming to is 12402,desktop trays or organizers (v2),programmable paper cutting machine,battery-powered electronic clock,dry erase writing boards (v3),stainless steel name plates, monograms, labels - bhel,show case,steel almirah / cabinets (v4),plastic moulded table - preschool kit,plastic chairs for general purposes conforming to is 13713 (v3),hand held brush cutter (v2),drinking water c

CTN :45320358

04 Jun, 2026 21.34 Lacs

Ganganagar - Rajasthan

Tender For supply of falope ring , urine collection bag with volume meter , vicryl no rb 90mm size 01 , walker adjustible and foldable , nelaton catheter size 14 , suction tube with connectors with standard tip yankur suction set , acticoat dressing , hydrofibre dressing 9 x 15cm box 0f 10 , hydrofibre dressing 9x25cm box 0f 10 , strile adhesive strips , urostomy kit complete with wafer10 bag 10 baseplate 01 powder 02 paste 01 belt brava tape 01 pair , wound manager large , biatin ag dressing pack of 10 , precision surgical skin marker sterile , babcock stripper , colostomy kit compolete with mouldable wafer 10 bag 10 baseplate 1 powder 2 paste 01 silicone spray 01 belt , cordless ultrasonic dissector 5 mm to13mm long , cordless ultrasonic dissector 5 mm to 39mm long , cordless ultrasonic generator for use along exiting cordless ultrasonic dissector , cyanoacrylate glue , dual composite mesh poly propylene plus polyglycaprone ptfe size 15 x 15cm , fistulectomy probe , giggli saw with handle , humby knife blade , instrument stain cleaner phosphoric acid 25 percent and cleaner 1 ltr , j tip guide wire of size 0 point 038 fr , new titanium linear cutter 55mm , ntlc reloads 55mm universal box of 6 , port dressing 2 x 3 cm , toomey syringe 70 ml , trucut biopsy gun , vascular tape white , vascular tape yellow , disposable laparoscopic suture passer , cv 6 poly propylene cardiovascular suture , cv 7 poly propylene cardiovascular suture , baloon tipped laparoscopic trocar 5mm , sump suction cannula , collagen granules , pipelle cannula disposable for endometrial biopsy , disposable cusco speculum , disposable karamans suction cannula size 6 or 7 or 8 or 9 , abdominal srain size 32 f , abdominal srain size 28 f , single use negative pressure wound tharapy system , viral barrier kit , titanium clip applicator for open surgery size lt100 , titanium clip applicator for open surgery size lt200 , titanium clip applicator for open surgery size lt300 , titanium clip applicator for open surgery size lt400 , disposable laparoscopic maryland dissector , disposable laparoscopic babcock forceps , disposable laparoscopic aspiration needle , disposable laparoscopic bowel grasper , disposable laparoscopic bull dog clamp , disposable laparoscopic uterine manipulator , disposable laparoscopic ovum forceps , disposable laparoscopic alis forceps , disposable laparoscopic claw extractor , disposable laparoscopic minilap alligatoir , barb suture , disposable laparoscopic hernia baloon dilator , disosable non absorbable mesh fixation device , ethibond braided polyester sutute no 1 , disposable laparoscopic port closure device , disposable circumcision stapler 15 , disposable circumcision stapler 18 , disposable circumcision stapler 28 , disposable circumcision stapler 30 , disposable circumcision stapler 32 , disposable circumcision stapler 26 , disposable falope ring applicator

Poly Can Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

State Government

State Government

Central Government And Public Sector