Latest poly tube Tenders | Government poly tube Tenders

State Government

CTN :45303634

30 May, 2026 NA

Ranchi - Jharkhand

Tender For e quotation for none schedule item rate - stone boulder of size 150 mm and below at quarry, supply of quarried stone 150 - 200 mm size for hand broken at quarry, boulder with minimum size of 300 mm for pitching at quarry, gravel/quarry spall at quarry, gelatin 80%, jute netting, open weave, 2.5 cm square opening for seeding and mulching, random rubble stone, sand bags (cost of sand and empty cement bag), square rubble coursed stone, stone bricks of size, (i) 250 mm x 125 mm x 100 mm, (ii) 250 mm x 125 mm x 125 mm, (i) g.i. wire (8 to 10 swg), (ii) black annealed (8 to 10 swg), binding wire, (i) annealled wire (20 to 25 gauge), (ii) black annealed (20 to 25 gauge), expanded metal (18 gauge) 40 mm x 25 mm x 75 mm wide, bituminastic board (for use as per expansion joint i.s.1838-1938 filter), (i) 25 mm thick, 150mm dia r.c.c.np2 perforated pipe, pressure release valve, (i) safety valve, (ii) pocket valve, cost of burnt clay pipe of internal dia 31.70 mm (11/4")external dia 38 mm (11/2"), (i)100 mm long, (ii)225 mm long, fuse coil, bolts 20 mm dia 25 cm long, coal tar, nuts and bolts 16 mm dia375 mm long with washer etc, palm leaves, check valve 38 mm dia., 38 mm dia. water hose 30m long, nx core bit 48 cts(imp), nx core bit 38 cts(imp), nx tc bit, bx tc bit, nx st reamer cell 6.5 cts(imp), bx st reamer cell 6.5 cts(imp), good quality wooden core box 3 metre long x 0.85 metre wide x0.15 metre deep with longitudinal compartment to accommodate 5 rows of 3 metre long cores i.e. total 15 metre

CTN :45302223

28 May, 2026 NA

Trivandrum - Kerala

Tender For supply of electrical materials for the operation and maintenance of technopark phase-iii campus - led light/light fixture, led polycarbonate tube light, led recessed panel light, led street light, led flood light, 6 a, 16 a modular socket, module plates, pvc surface box switch gears (mcb, isolator, rccb, rcbo etc.), 6 a,3 pin plug top, pvc conduit pipe, pvc insulated wires, motion sensor

CTN :45205749

29 May, 2026 NA

Namakkal - Tamil Nadu

Tender For corrigendum : purchase of hydraulic hose and other items - high pressure hydraulic hose, specification - din en853 2sn - sae r2at working pressure - 400 bar connection with bsp female swiel on both side a) 1/4 inch x 900mm long, one touch fittings suitable for 100mm tube - janatic make, a) 3/8 inch threaded x 10mm, straight connector, b) 1/4 inch threaded x 10mm, straight connector, c) 5/8 inch threaded x 10mm, straight connector, d) 3/4 inch threaded x 10mm, straight connector, 10mm od, polyurethen tube coil to with stand pressure 10 kg/cm2, 3/4 inch transparent pvc hose, 1 inch transparent pvc hose

CTN :45244477

25 May, 2026 NA

Pondicherry - Pondicherry

Tender For providing and fixing of kitchen chimney gas poipeline connection and kitchen equipments for the canteen building inside the ptu campus under rusa fund - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

Central Government/Public Sector

CTN :45282178

11 Jun, 2026 2.78 Lacs

Chhindwara - Madhya Pradesh

Tender For supply of polythene tube for stemming materials

State Government

CTN :45245312

05 Jun, 2026 NA

Sagar - Madhya Pradesh

Tender For name of work: e-tender for the procurement of materials for use in nurseries under the units of the sagar social forestry circle - 1” braided water hose pipe (length: 30 meters) , monoblock motor: 1 hp, 2-phase , monoblock motor: 2 hp, 2-phase , monoblock motor: 3 hp, 3-phase , monoblock motor: 5 hp, 3-phase , monoblock motor: 7.5 hp, 3-phase , submersible motor: 1 hp, 2-phase , submersible motor: 2 hp, 2-phase , submersible motor: 3 hp, 3-phase , submersible motor: 5 hp, 3-phase , submersible motor: 7.5 hp, 3-phase , submersible motor: 10 hp, 3-phase , submersible pump: 2 hp, 2-phase , submersible pump: 3 hp, 3-phase , submersible pump: 5 hp, 3-phase , submersible pump: 7.5 hp, 3-phase , submersible pump: 10 hp, 3-phase , c-clamp type hdpe pipe (length: 20 feet), diameter: 1.5” , c-clamp type hdpe pipe (length: 20 feet), diameter: 2” , c-clamp type hdpe pipe (length 20 ft), dia 2.5" , c-clamp type hdpe pipe (length 20 ft), dia 3" , t-bend 2.5" , l-bend 2.5" , t-bend 3" , l-bend 3" , end cap 2.5" , washer 2.5" , washer 3" , diesel engine pump 5 hp , diesel engine pump 7.5 hp , hdpe rolled pipe, dia 1.5" , hdpe rolled pipe, dia 2" , hdpe rolled pipe, dia 2.5" , hdpe rolled pipe, dia 3" , plastic nozzle for sprinkler 3/4" , brass nozzle for sprinkler 3/4" , g.i. riser pipe for sprinkler 3/4" , g.i. socket for sprinkler 3/4" , g.i. foot button for sprinkler , g.i. socket 3/4" , covering/cladding material: structure covered with uv-stabilized hdpe / polycarbonate multilayer sheet , screen filter for fogger system , booster pump , temperature meter , 16 mm lateral line , 4-way fogger , exhaust fan (30" dia) , honeycomb pad for cooling system , g.i. round pipe 1" , g.i. round pipe 1.5" , g.i. round pipe 2" , g.i. round pipe 2.5" , iron sieve (for sand) 3x6 ft (with wooden frame) , dhanzyme fertilizer , d.a.p. , n.p.k. , chlorpyrifos 20% ec , fungicide (bavistin powder) , petrol-operated spray pump (20 liters) skid steer loader , gi pan (tagari) – 15-inch , plastic pan (tagari) – 20-inch , shovel (with ms handle) , hand trowel (khurpi) , watering can , pickaxe , crowbar – 25 mm x 5 ft , double-wheel barrow trolley (ms) – size: 600 x 480 x 600 mm , nylon rope – 12 mm dia. (for borewells) , nylon rope – 10 mm dia. (for borewells) , gi pipe – 2.0 inch (for borewell use) , earthworms (species: *eisenia fetida*) , pvc casing pipe – 6-inch , pvc casing pipe – 8-inch , ro water filter (with cooler; capacity: 40 liters) , gi profile strip – length: 4 meters , gi (galvanized iron) zigzag spring , 2-way fogger , polysheet 200 micron, 800 gauge , 40 mm perforated rainpipe (length 100 m) , 40 mm jointer pipe (pvc) , mta 32 mm x 40 mm (pvc) , end cap 40 mm (pvc) , mta cock 32 mm x 40 mm , 45 mm perforated rainpipe (length 100 m) , 2.5" adapter, c-clamp type (hdpe) , 2.5" sprinkler pipe head (hdpe) , 2.5" sprinkler pipe tail (hdpe) , black polythene bag (size 15x25, 250 gauge) , white polythene bag (size 15x25, 400 gauge) , black polythene bag (size 15x25, 400 gauge) , white polythene bag (size 20x30, 400 gauge) , black polythene bag (size 20x30, 400 gauge) , black ldpe sheet , vermicompost bag, 100g, printed (size 22x36 inches; capacity 50 kg) , neem bag, 100g, printed (size 22x36 inches; capacity 50 kg) , green net (shade net) — 50% shade , green net (shade net) — 75% shade , green net (shade net) — 95% shade , chain-link fencing — 1.5 m , chain-link fencing — 2 m , chain-link fencing — 2.5 m , barbed wire , angle iron 50x50x5 mm — 2 m , angle iron 50x50x5 mm — 2.5 m angle iron 50x50x5 mm, 3 mtr , iron rebar (reinforcement bar) 6 mm , iron rebar 8 mm , iron rebar 10 mm , iron rebar 12 mm , m.s. pipe 1"x1" , m.s. pipe 1.5"x1.5" , m.s. pipe 2"x2" , m.s. pipe 2.5"x2.5" , m.s. pipe 3"x3" , cement (bag weight: 50 kg) , sand (for construction) , crushed stone aggregate (40 mm) , crushed stone aggregate (20 mm) , crushed stone aggregate (6 mm) , bricks (kiln-fired) , g.i. profile sheet , vitrified tiles (4"x2") (glossy double charge) thickness 9-10 mm,

CTN :45231183

26 May, 2026 50.0 Thousand

Palacode - Tamil Nadu

Tender For tender notice for purchase of polyurethane tube and connector

Central Government And Public Sector

CTN :45296336

13 Jun, 2026 41.66 Lacs

Guwahati - Assam

Tender For supply of supply of ductible split ac , itc of sac , pdg. and installing copper pipe , sitc of rigid u pvc piping , providing and fixing of outdoor unit stand , supplying and installing perforated m s cable tray , supply copper armoured power cable , supply copper unarmoured power cable , supplying and fixing spn sheet steel enclosure , providing and fixing gi wire

State Government

CTN :45275013

26 May, 2026 NA

Multi City - Delhi

Tender For auction sale of depot ferrous scrap - miscellaneous ferrous scrap consisting of ms pipe, ms platform gutter, gate lock, camera housing, tom cpu cage, gi clamp, nut & bolt, rack handle, earth switch handle, fencing, hydrant box, co2 fire extinguisher, cable tray, nrv, meter box, butter fly valve, pump handle, hand rail,i-clamp, c-levis end, board angle, exhaust bellow, brake shoe, locker, cross arms, super mast, bearing, hose drum, angle, false ceiling, almirah,pad lock, hacksaw frame, metal perforated chair,plu, ferrous parts of pids panel,smps parts, spare cells charger, ms drain cover,horn, isolator lever, opc suspension clamp, n/b of pg, driving screw assemble, rtu panel, fhc door, ball valve, coupling, nozzle, ups battery bank, table, wheel chair, bajaj hot case, autometic hand sanitiser dispenser, cable clamp, hnaging device, screw element, marker board, battery cabinet, osg rope, landing door header, brake unit, main rope 8mm, drawer, q manager, standee, hand & padel sanitiser dispenser, information board, rc, catenary & contact clamp, tirfof, n/b 76 pg, hose drum, 4 way valve,pressure switch, flexible gi condute, blade, anti roll bar, n2,o2, da & r-410 gas cylinder, tool box, angles etc. note: (i) minimum quantity to be lifted per day= 9 mt. (ii) total nos. of days for lifting complete lot= 07"

CTN :45228397

29 May, 2026 NA

Birbhum - West Bengal

Tender For procurement of pu tube and pu fittings festo or imi norgren or parker - pu tube,od-10mm, id-6.5mm pu tube od-10mm,id-6.5mm,wall thickness1.75 mm,temp range-40f to+160f,hardness shorea98,brust pressure(psi)-450, vacuum rating-to 28"hg,working pr.(psi)-150 @70f ( make: festo/imi norgren/parker specified as per annexure-a ), pu tube connector 12 mm diax1/2" bsp(m) ( make: festo/imi norgren/parker moc: brass, nickel-plated. specified as per annexure-a ), pu tube connector size 10 mm diax1/2in bsp(m) ( make: festo/imi norgren/parker moc: brass, nickel-plated. specified as per annexure-a ), pu tube connector size 10 mm diax1/4in bsp(m) ( make: festo/imi norgren/parker moc: brass, nickel-plated. specified as per annexure-a ), pu tube connector size 10 mm diax3/8in bsp(m) ( make: festo/imi norgren/parker moc: brass, nickel-plated. specified as per annexure-a ), connector,3/8in bsp,male,pu # # for dia:8mm poly urethene (pu) tube ( make: festo/imi norgren/parker moc: brass, nickel-plated. specified as per annexure-a ), connector,equal tee,dia 8mm,pu # # for poly urethene (pu) tube# for poly urethene (pu) tube ( make: festo/imi norgren/parker. specified as per annexure-a ), connector,1/4inbsp male,for pu tube # # for 6mm od pu tube ( make: festo/imi norgren/parker moc: brass, nickel-plated. specified as per annexure-a ), straight connector,1/4" bsp,male,pu # dia: 8mm for poly urethene (pu) tube ( make: festo/imi norgren/parker moc: moc: brass, nickel-plated. specified as per annexure-a ), straight connector,1/8" bsp,male,pu # dia: 4mm for poly urethene (pu) tube ( make: festo/imi norgren/parker moc: moc: brass, nickel-plated.. specified as per annexure-a ), straight connector,1/8" bsp,male,pu # dia: 6mm for poly urethene (pu) tube ( make: festo/imi norgren/parker moc: moc: brass, nickel-plated. specified as per annexure-a ), equal tee for 10/8 mm polyurethene tube # ( item to be supplied: fittings, equal tee for 10 mm poly urethene (pu) tube make: festo/imi norgren/parker. specified as per annexure-a ), pu tube,dia 8mm odx6mm id # ( make: festo/imi norgren/parker. specified as per annexure-a ), straight connector,m5,male,dia 4mm,pu # for poly urethene (pu) tube ( make: festo/imi norgren/parker moc: moc: brass, nickel-plated. specified as per annexure-a ), pu push male connector sz 1/2 *8 mm for dfds system make: festo ( make: festo/imi norgren/parker moc: moc: brass, nickel-plated. specified as per annexure-a )

Poly Tube Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government And Public Sector

State Government