Latest polycarbonate roof Tenders | Government polycarbonate roof Tenders

Co-operative

CTN :45729955

14 Jul, 2026 NA

Najibabad - Uttar Pradesh

Tender For 477/roof and damaged structure repair in clarification house

CTN :45656335

07 Jul, 2026 96.20 Lacs

Bulandshahr - Uttar Pradesh

Tender For ¼1½ new hall and two rooms by demolishing the damaged room of primary school, chandpur. ¼2½ two new rooms by demolishing part of the damaged structure of the pre-built primary school civil line. ¼3½ ward&16 sanmilion u.p.v. diet complex roof waterproofing and toilet repair work. ¼4½ sanvilion u.p.v. construction of new rooms and a kitchen by demolishing the damaged room of harich udra nagar. construction of new rooms by demolishing the damaged room of pvt. police line.

Central Government/Public Sector

CTN :45643464

01 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply testing, installation and commissioning of 04 nos boggies at wagon repair workshop jhansi. having specification along with following accessories; (a) 04 nos. bogie (b) seating capacity of each bogie should not be less than 6 persons. (c) solar panel on roof of bogie with light in every bogie. (d) track width = 22 inches (e) base should be of heavy frame ms structure (f) wheel size = 6 inch (g) outer bogie body and top should be of frp. (h)bogie size 7ft x3.5 ft (i) lighting system - led light in each bogie (j) complete supply, installation, testing and commissioning at site. (k) all fastners and fixtures and accessories included. [ warranty period: 36 months after the date of delivery ] ]

CTN :45072222

18 Jun, 2026 NA

Goa - Goa

Tender For bid to ras repair, maintenance, and installation of plant systems equipments- frame work: ms / rcc, sheet, repair of control console to arrest ingress of water/ humidity by use of qty 20 rcc blocks of dimension 04 feet x 02 feet x 06 inches (height). 2.2 repair of roof of control console to protect against sun light towards ensuring controlled temperature which is required for electronic equipment held in it. the protective structure would consist of vertical square tubes of dimension 40 x 40 mm and length 128 feet clamped onto the side wall body of the container. a horizontal framework 25 x 25 mm of similar raw material (square tube of dimensions 40 x 40 mm, 178 feet length) shall be fixed onto these vertical rods. 2.3 repair of fuel tank. 2.4 repair of qty 02 mtb side platforms used for inspection and adjustment during ground run/ testing of engine. 2.5 provisioning of consumables for maintenance of dg set of the console.

State Government

CTN :45415605

17 Jun, 2026 3.22 Crore

Jummu - Jammu And Kashmir

Tender For corrigendum : reconstruction/repair of civil structures and laying of damaged rising main and distribution at various locations under sassci work wise details given annexure i - restoration works of jal shakti (phe) city division no.i including reconstruction / repair of civil structure and laying of damaged rising main and distribution at various locations uinder sasci (phe sector). name of works:a.restoration of rising main and washed away supports of 8" rising main in lower roop nagar. b.damage of compound wall at tibba section of sub- division dhounthly. c.constuction of main gate / barbed wire fencing / road/ wall damaged near gsr 22.50 lacs glns at lohar station. d. restoration of boundary wall, roof and floor of the pump room building at phase iind muthi pumping station. e. improvement / restoration of damage chain link fencing around intake structure at cps nai muthi. f. construction of protection work to protect tube well and pump room at muthi left and muthi 6 and muthi 7 tube well at cps nai basti. g. providing and laying damage rising main at tube well muthi left, tube well no.6 and tube well no.7 nai basti at cps nai basti. h. repairement of the tube well buildings at muthi left, muthi 6, muthi 7 and cps naibasti. i. raising of udheywala station and construction of manifold and allied works of welding at tube well no.5 udheywala and suryavanshi nagar station of sub-division muthi. j. uplifting the central pumping station samadhian by way of shifting civil, electromechanical infrastructure of sub-division dhounthly under phase 1st. k. uplifting the central pumping station samadhian by way of shifting civil, electromechanical infrastructure of sub-division dhounthly under phase 2nd. l. uplifting the central pumping station samadhian by way of shifting civil, electromechanical infrastructure of sub-division dhounthly under phase 3rd. m. construction of 200000 glns sump tank at cps samadian. n. shifting of pipe utiliies at brick klin tube well and its allied works. o. reconstruction / repairment of bath room at sub-division dhounthly and muthi. p. restore the front area by way of laying paver blocks at cps gujjar nagar. q. erection of truss over the damage roof top central pumping station cps muthi goan. r. erection of truss over the damage roof top central pumping station and dismentaling of staff qtr at station cps gujjar nagar. s. reconstruction of damage operator qtr at cps gujjar nagar under dhounthly sub-division.

Central Government/Public Sector

CTN :45414872

08 Jun, 2026 NA

Raigad - Maharashtra

Tender For replacing polycarbonate roof sheet, painting of crame structure and gutter waterproofing of staircase dome near classroom complex in main building.

CTN :45451265

19 Jun, 2026 NA

Budgam - Jammu And Kashmir

Tender For tender for supply of truss - the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 4.00 mm (8.22 kg/rm) , partition truss - the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 4.00 mm (8.22 kg/rm) , main column of rhs 122 x 61 x 3.6 mm 9.67 kgs per rm , side column for steel door of rhs 122 x 61 x 3.6 mm (9.67 kgs per rm) , 2.825m length each , runner front and back side length 3660mm , runner partition or gable end length 6100mm , runner front and back door sides length 2450mm , purlin of rectangular steel hollow sections of size 96mm x 48 mm x 4.0 mm (8.22 kg per rm) with 6mm thick , ms extension purlin shall be of 450mm long fabricated out of rectangular steel hollow sections , 1400 x 450mm for door. , ms sunshade with sheet 0.63mm thick 1400 x 450mm for door. , ms sunshade with sheet 0.63mm thick 1500 x 450mm for window , top runner shs 45x45x2.9 mm steel sections , ms sheet top and bottom u channel 3000mm length , false ceiling supporting angle ms 65x65x5 mm , for wall pre-painted gi both sides , tongue and groove , for ceiling- pre-painted gi both sides , tongue and groove , ppgi outer corner flashing 200x200x3050mm , door flashing of size 100x100x2700mm , door flashing of size 100x100x1500mm , window flashing of size 50x50x1100mm , ppgi ridge cover 450x450x3050mm , ppgi inner corner flashing 100x100x2700mm , (colour white) , ppgi inner corner ceiling flashing 50x50x3000mm (l shaped) , ppgi camouflage roof sheet 4000x1060mm x 0.63mm , ppgi camouflage wall cladding sheet 3050x1060mm x 0.63mm , ppgi camouflage for inner partition wall cladding sheet , polycarbonate roof sheet 4000mmx1060mm x 3 mm , ppgi camouflage for gable wall cladding sheet 3000x1060mm x 0.63mm , ms foundation bolt 16x450mm , ms nut and bolt 12 x 40 mm , ms nut and bolt 12 x 100 mm , ms nut and bolt 16 x 50 mm (connect of truss and purlins) , ms nut and bolt 10x75 and washer for fixing of sunshed , gi self tapping screw 75mm (for fixing panel with coln) , gi self tapping screw 25mm (for fixing of inner flasing) , gi self tapping screw 50mm (for fixing of roof sheet) , double shutter steel doors will be provided in each store shelter as shown in the drawing. , windows in each shelter will be provided. window size will be 1.20m x 1.20 m with two vertical panels , one insulated puf door shutter with aluminium frame of suitable size shall be provided complete with pressed steel or u-channel frame , one fixed glass window of size 2.00m wide x 1.20m high shall be provided complete with ms frame , necessary cleats , rubber beading and transparent glass of minimum 5mm thickness , padlock with 7 levers 50mm , with 3 nos spare key. , silicon sealant 280 ml , manufacturing sand (m- sand) confirming to is 383-2016 , crushed stone sand category. , stone aggregate to be crushed rock or gravel 20mm graded conforming to is 383-2016 , stone aggregate to be crushed rock or gravel 40mm graded conforming to is 383-2016 , common burnt clay building bricks sub class b modular size designation 75kgf per cm2 , best locally available with sharp corners , non skid ceramic tiles of size 400 x 400 x 7-8mm conforming to is 15622 2017 , glass dividing strips 40x4mm , prefabricated foundation reinforcement type f-2 made of 12 mm & 10 mm for steel as main bars and 8 mm dia deformed bars as in stirrups us as per drawings , steel form work -type -2 -steel form work material for columns of size 0.3 x 0.3 x 0.9m and columns footing of size 0.9 x 0.9 x 0.3 m ( type f-2) made out of 3mm thick ms sheet , lightning conductor confirming to is - 3043 - 2018 with all accessories , pvc ceiling rose 2 or 3 terminal. , led tube light fitting complete 4 feet long 18 watt tube rod and electronic ballast , xlpe insulated pvc seathed (heavy duty) armoured multi core cable 16 sqmm 2 core aluminum conductor for working voltage up to and including 1100 volt ,

CTN :45362406

06 Jun, 2026 NA

Thiruvananthapuram - Kerala

Tender For construction of new hospital block for sctimst at trivandrum. sh providing openable glazed windows to external staircase openings, poly carbonate sheet roofing on ramp, steel structure support for hoarding on roof of service block , laying paver blocks below connecting bridge near old hospital building and other miscellaneous works. sh providing miscellaneous repair and maintenance works such as ineterbal planting , replacement of damaged floor tiles and cleaning of internal and external areas at guest house ( cpwd store godown no.3 renovated as guest house) near pmssy project division, melethumele, thiruvananthapuram.subwork/packages:providing miscellaneous repair and maintenance works such as inernal painting , replacement of damaged flooe tiles and cleaning of inetrnal and external areas at the guest house (cpwd store godown no.3 renovated as guest house ) near pmssy project division , melethumele, thiruvananthapuram.

State Government

CTN :45341802

29 May, 2026 NA

Port Blair - Andaman And Nicobar Islands

Tender For conversion of old passanger shed to passenger facilitation centre for operationalization sea plane service under sdan scheme at swaraj dweep under cd-i, a.p.w.d., sri vijaya puram sub work changing of damaged polycarbonate roofing with new polycarb

CTN :45279811

10 Jun, 2026 1.50 Crore

Faridkot - Punjab

Tender For supply of long range fixed wing plane integrated with three axis gimbal camera day and night for training and surveillance along with accessories , first person view fpv drone with digital goggles more than three point five inch upto five inch , fully integrated quadcopter training drone with three axis gimbal camera , spare fpv propellers , spare quadcopter propellers , spare batteries for fpv , spare batteries for quadcopter , steel racks for storage , obstacle course , mock up targets miniature , battlefield arena with branding and turf , digital score board and scoring system , led goal posts , ttt program , installation and commissioning , three dof drone stability jig , propeller balancer upto thirty four inch propellers , flight controller and calibration station , battery diagnostic station , three d printer with filament , soldering and rework station , tooling station drone service and service tools , consumables wires comma connectors comma nuts comma bolts comma straps comma lipo safe bags , cad designing station for three d printing , cad workstation license basic and advance , fixed wing aeromodels with detachable parts , fixed wing diy kit , diy rtf quadcopter kit for assembly training , quadcopter frames , bldc motors for quadcopter , esc for quadcopters , propellers for quadcopter , flight controllers plus gps module for quadcopter , remote controllers for quadcopter , battery for quadcopter , battery chargers for quadcopter , gimbal camera for quadcopter , hexacopter frames , bldc motor for hexacopter , esc for hexacopter , propellers for hexacopter , flight controllers plus gps module for hexacopter , remote controllers for hexacopter , battery for hexacopter , gimbal camera for hexacopter , battery charger for hexacopter , fpv frames , fpv motors , four in one esc for fpv drone plus flight controller , propellers for fpv drone , remote controller for fpv drones , battery for fpv drones , battery charger for fpv drone , payload dropping mechanism , three d printing station cabin , drone assembly station cabin , two sided soldering work station with shelves , platform for flight controller calibration station , platform for battery charging and diagnostic station , cubicle for cad designing , closed racks for storage , chairs rotating , one point five ton split ac , simulator hardware , drone simulator software various formats , vr simulator , vr goggles for fpv simulator , chairs , platform for simulator station , led tv for parallel display , partitions panels , ups for power backup , tables for vr simulator , connectors hdmi cables comma power cables comma wires comma etc , wall mounted eighty five inch interactive panel , four point one surround sound speakers with setup , lecture stand , wall mounted white board , racks for storage , cubicle for instructor , chairs with writing platform , training aids set , flex boards , acrylic board for all labs , wall paneling of all labs , fire extinguisher , interactive kiosk , polycarbonate roof panel for area seven into seven with iron angles

Polycarbonate Roof Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government