Latest polyester powder Tenders | Government polyester powder Tenders

Corporations And Associations And Others

CTN :40613811

28 Jul, 2025 9.90 Crore

Panchkula - Haryana

Tender For corrigendum : online tender for the rate contract for the supply of medical drug consumables to various hospitals of government of haryana for a period of two years for group c - urine screening through dry chemistry rapid testing kit/strips for multiple drug uses:- 1. morphine/ opiates 2. buprenorphine 3. tramadol 4. d. propoxyphene 5. benzodiazepines test kit kit, dodecylbispropylene triamine 9.2gm, didecyldimethyl ammonium chloride 13.0 gm for fogging, 5 liter pack, potassium peroxomonosulphate 50% w/w containig aldehyde free disinfectant, 5 kg, cetrimide solution 20% conc. for dilution, 500 ml plastic bottle, i.o dye (rhex id dye) each (indigo blue dye), carbolic acid 400 ml, ultrasound jelly 200 ml bottle, pedeatrics iv drip set with air vent, chlorhexidine solution 5% conc. for dilution, 500 ml, skin traction set standard size, gentian violet (methylrosanilinium chloride paint preparation aqueous solution 0.5%w/v), 50 ml dark bottle, hydrogen peroxide solution 6%, 400 ml bottle, ecg jelly 200 ml bottle, nitrous oxide inhalation, potassium permanganate crystal for solution 100 gm, balance salt solution (bss for eye surgery) 500 ml, troponin t, sensitivity:-not less than 95.8%, direct whole blood test kit, bleaching powder containg not less then 30% w/w of avialble chlorine, 1 kg, epidural set, posterior chamber pmma iol optical diameter 6mm, overall length 12.5 mm, optic design biconvex,360 degrees posterior square edge and uv protection should be there, dioptric range +23d, posterior chamber pmma iol optical diameter 6mm, overall length 12.5 mm, optic design biconvex,360 degrees posterior square edge and uv protection should be there, dioptric range +22d, posterior chamber pmma iol optical diameter 6mm, overall length 12.5 mm, optic design biconvex,360 degrees posterior square edge and uv protection should be there, dioptric range +24d, chest tube with water seal no.32, posterior chamber pmma iol optical diameter 6mm, overall length 12.5 mm, optic design biconvex,360 degrees posterior square edge and uv protection should be there, dioptric range +17d, posterior chamber pmma iol optical diameter 6mm, overall length 12.5 mm, optic design biconvex,360 degrees posterior square edge and uv protection should be there, dioptric range +25d, spc set (suprapubic catheter set), posterior chamber pmma iol optical diameter 6mm, overall length 12.5 mm, optic design biconvex,360 degrees posterior square edge and uv protection should be there, dioptric range +18d, mr cannula no. 5, guide wire teflon coated v straight tip, endotracheal tube, uncuffed no. 3.0 specification: sterile, single use, medical grade pvc, transparent, murphy eye at distal end with polished smoothness, radio-opaque line throughout the length, standard 15 mm connector at proximal end. curved blister pack suiting the magill curve. internal diameter: 3.0mm -, endotracheal tube, uncuffed no. 3.5 specification: sterile, single use, medical grade pvc, transparent, murphy eye at distal end with polished smoothness, radio-opaque line throughout the length, standard 15 mm connector at proximal end. curved blister pack suiting the magill curve. internal diameter: 3.5mm -, albendazole chewable tablets 400 mg(the chewable tablets shall also comply with the test for disintegration and dissolution as per monograph given in international pharmacopeia as per requirement of goi)

CTN :41074839

05 Aug, 2025 NA

Delhi - Delhi

Tender For supply of cd63 monoclonal antibody ad1 , alix recombinant rabbit monoclonal , goat anti-rabbit igg , aldehyde sulfate latex beads , mineral oil , readystrips tm ipg strips , readystripstm ipg strips , trifluoroacetic acid hi-lr , benzamidine hydrochloride , pharmalyt broad range ph , 2- propanol , immersion oil synthetic for microscopy , gel-side down electrode wicks , unstained protein standards , mirvana mirna iso kit 10-40iso , miscript ii pt kit 12 reagents , benzyl alcohol, a.r.

Central Government And Public Sector

CTN :41080799

14 Aug, 2025 177

Mandya - Karnataka

Tender For the supply of chemicals, reagents & etc items to the pathology dept of mims, mandya-, acid fuchsine, phosphomolybdic acid, methyl blue, iodine, peanut oil, potassium iodide, ferric chloride, alizarin red solution ( ci 5805 ), 3 part haematology cell counter fluids. specificationsfluids should be suitable for sysmex xp 100 and composed of cellpack - 20 l, ammonium hydroxide, 3 part haematology cell counter fluids. , specifications , fluids should be suitable for sysmex xp 100 and composed of cell clean - 50 ml , 8 check quality control 3 , specifications , suitable for sysmex xp 100, aptt reagents 10 ml , specifications: , reagent should be in liquid stable form , calcium chloride for aptt 10 ml. , prothrombin kit 10 ml , reagent should be in liquid form with isi value of 1.05 or 1.1, cuvette for pt/ aptt test. , cuvette should be suitable for operon xl 1000i coagulometer, x1 detergent (concentrated) 100 ml, x2 probe cleaner (ready to use) 100 ml, quick coag level 1 control 1 ml, quick coag level 2 control 1 ml, afb staining kit (rapid), benedicts reagent 5 litres, benzidine powder 25 gms, barium chloride 10% 500 ml, blood grouping [abd] kit 3x10 ml , specifications: , igm monoclonal antibodies , titre : a and b - 1:256; d 1:64, avidity : a and b 5 to 6 secs;, d -10 to 20 secs, cover slips (18x18mm) 10 gms, specifications: , - 0.13mm to 0.16mm thickness , - optically flat sheet glass , - ground edges , cover slips (22x22mm) 10 gms, specifications: , - 0.13mm to 0.16mm thickness , - optically flat sheet glass, - ground edges , cover slips (30x22mm) 10 gms, specifications:, - 0.13mm to 0.16mm thickness , - optically flat sheet glass, - ground edges , cover slips (40x22mm) 10 gms, specifications: , - 0.13mm to 0.16mm thickness , - optically flat sheet glass , - ground edges , cover slips (50x22mm) 10 gms, specifications: , - 0.13mm to 0.16mm thickness , - optically flat sheet glass , - ground edges , chloroform 2.5 litres , specifications: , - minimum assay: 99.5% , - weight per ml at 200c : 1.487-10489gm, - maximum limit of impurities: , - acidity: 0.0005% , - non volatile matter: 0.002% , - water: 0.1%, castor oil 400 ml , specifications: for microscopy, disposable tissue cassettes , specifications: , suitable for histopathology tissue processing & paraffin block preparation. , suitable for holder of leica microtome , dpx 250 ml: , - weight/ml at 20o c about 0.920 g , - refractive index- 1.515 to 1.525 , - suitability for microscopy passes test. , distilled water 20 litres, disposable esr pipette , fast green fcf, disposable microtome blade (high profile) 50s, specifications, - suitable for leica rm 2125 , - stainless steel, - high profile , - imported, yellow tips, diamond pencil , specifications: for marking glass slides, eosin powder 25 gms, specifications: , water soluble , edta powder 500 gms, specifications: of standard company, filter paper sheets , size 2 feet x 1.5 feet, filter paper [round], fouchets reagent 125 ml, frosted glass slides 50s, glass slide 50s , specifications: , - ground edges. , - lint free. , - thickness 1.45 mm+/- 0.1 mm. , - optically flat sheet glass , glacial acetic acid 2.5 litres, hydrogen peroxide 500 ml, haematoxylin solution 125 ml, hydrochloric acid [concentrated] 2.5 l, hydrochloric acid n/10 500 ml, isopropyl alcohol 2.5 litres , specifications :, should be extra pure with refractive index 1.377-1.378 , maximum limits of impurities , acidity: 0.004 % , aldehyde & ketone 0.1 % , water 0.2 % , non volatile matter 0. 01 % , lancet 100s, leishmans powder 25 gms, specification : , - absorption max 645-648nm (max1). , - absorption max 522-525nm. (max2). , - specific extinction 900-1110. - (e1 % / 1 cm: max 1) - specific extinction :-650 - 850. - (e1 % / 1 cm: max 2) - loss on drying (105c) - 10% or less , - suitability for microscopy passes test., methanol 2.5 litres , specification: , minimum assay 99. 0 % , wt / ml at 200c 0.790 0.792g , boiling range (64.0 to 65.5 c) min

Central Government/Public Sector

CTN :41046671

01 Aug, 2025 NA

Panvel - Maharashtra

Tender For supply of bactericide (aldehyde type) (ongc) (q3)

CTN :40830467

21 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back sha

CTN :40830509

19 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be opera

Polyester Powder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Central Government And Public Sector

Central Government/Public Sector