Latest polyethylene pipe Tenders | Government polyethylene pipe Tenders

CTN :43565693

23 Jan, 2026 NA

Leh Ladakh - Jammu And Kashmir

Tender For supply of irrigation equipment - polyethylene pipes for irrigation laterals as per is 12786

State Government

CTN :43463670

21 Jan, 2026 NA

Thrissur - Kerala

Tender For supply of agricultural machineries for central prison and correctional home, viyyur, thrissur - supply of agricultural machineries with following specifications:, supply of tractorand accessories with following specifications:a) supply of tractor with following specifications 4 stroke, direct injection diesel engine, dual clutch, oil immersed disc brake, single pto, independent pto lever, dry type air filter, constant mesh / synchromesh transmission, planetary drive, 4wheel drive, pto power above 38hp, automatic depth and draft control, dry weight below 2 ton, wheel base above 1950mm, ground clearance more than 350mm, water proof front housing, in-built power-steering. front bumper, test report from designated institution.accessories: toolkit, srew jack, rops with canopy, seat with seat belt, ballast weight, drawbar, universal joint, 3 point link with nut and bolt. b) cutivator5 tyne rigid type duck foot cultivator suitable for the above tractor, test report from designated institution c) rotavatorcentrally aligned multi-speed rotavator with gear type transmission suitable for the above tractor1. width of cut not less than 1750 mm2. number of blades 423. working depth upto 200 mm4. weight less than 500 kgtest report from designated institutiond) tractor operated shreddertractor pto operated shredder having production capacity not below 1500 kg/hr with universal joint suitable for the above tractor, input size dimension 1450 x 1760 x 1050mm (l*w*b). test report from designated institutione) hydraulic tipping trailer 5tone suitable for above tractorsuitable for above tractor, body size 10ft x 6ft x1.5ft, platform with minimum thickness of 5mm ms sheet, side door with minimum thickness of 2.5mm ms sheet, with minimum jack capacity of 5 ton and tyre size 9.00 x16. (minimum) 4 mm, t jacky of 5t capacity to be supplied with 360 degree turning clamp. , garden tiller 5.5 hp with attachments blue spirel, ridger rotavator with specification below4 stroke, air cooled, single cylinder, hp not less than 5hp, petrol engine working width 35-55-85cm, depth not below 7.5cm, overall weight not more than 60kg, test report from designated institution, brush cutter4 stroke, cutter dia. not less than 300mm, overall weight less than 8kg, hp not less than 1.5 hp, cutter dia not less 300mm,fuel tank capacity not less than 600 ml. cost including gst, transportation up to site and demo. test certificate from designated institution, coconut climberhemperi model with ss 3 rod, weight less than or equal to 12 kg., aluminum ladder aluminum straight ladder (20ft) with flat step, load bearing capacity 150kg, supporting channel thickness 4mm or above, riser height 10 to 13 inch, step channel width 2inch or above, test report from designated institution, aluminum pole ladder aluminum pole ladder height 30ft or nearest with weight below 15kg and cylindrical aluminium pipe with thickness not below 1,3mm with circlip type. nylon steps and soil gripper, gap between step not above 30cc, test certificate from any govt institution., battery operated sprayerbattery operated sprayer 12 amp/12 v battery and with suitable lance, tank capacity 15 lr to 20 lr, weight not more than 7kg, auto cutoff, test report from designated institution, chain sawchain saw petrol engine 2 stroke with engine cc 75 to 90, weight power 5.5hp, overall weight below 8 kg, carbide tipped blade, guide bar length 18 inch,test report from designated institution, petrol operated water pumppetrol fuel, 3hp or nearest at 3600rpm, 4 stroke, forced air cooled, pump type centrifugal self priming pump, inlet dia 80mm, outlet 80mm, discharge not less than 1100 lpm, total head 23m, dry weight not more than 28kg,test report from designated institution, telescopic pole pruner manualtelescopic extendable pole pruner (manual) with 6.5m aluminum pipe, 16" curved tooth s.s. pruner blade, weight not more than 3kg., chaff cuttersingle phase a/c induction motor 5 hp or nearest, 3 star rating or above, cutting capacit

Central Government/Public Sector

CTN :43522691

21 Jan, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of polyethylene pipes for water supply conforming to is 4984 (q3)

CTN :43494625

15 Jan, 2026 6.36 Lacs

Multi City - Karnataka

Tender For supply of material and machinaries the construction of a kitchen at the kannada higher primary school in bannur village of athani taluka - pvc pipe of 4kgcum75 mm morb35, ceramictiles 30x 30 cms morb25, providing and installing of pre painted galvalume iron trapezoidal profiled sheet, providing and fixing in position brass bib cock of approved quality 20mm nominal bore, providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm, fabricating, supplying and erecting m.s. tubulartruss, providing and fixing in position black cuddapah slab / shahabad slab / thandur blue slab 4 cms thick, providing and fixing glazed vitrified tiles of approved make, quality and colour of size 600x600x10mm thick, providing and fixing in position in cement concrete steel glazed windows and ventilators side hung/top hung fully openable as per approved drawings, providing and applying two coats dry distemper of approved brand, and shade on wall surface including priming coat and whitening after throughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications, providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specificaiton, atn9 hom of vibrator 0.71 days, atn8 plasticizer / super plasticizer, atn7 mixer (concrete) - 1 cum capacity, atn6 portland cement, atn5 broken stone aggregate 12 mm to 10 mm size, atn4 broken stone aggregate 20 mm size, atn3 broken stone aggregate 40 mm size, atn22 burnt bricks class 35 (non modular), atn2 coarse sand (zone iii), atn15 mixer (concrete small used in culvert), atn14 bond stone 20 x 20 x 45 cm, atn13 rubble stones, atn11 binding wire, atn10 tmt bars fe 500, atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, atn30 providing and fixing in position fully panelled matti / nandi wood shutters for doors, stylesand rails of 30mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as perdrawing and panels of 20mm thick including cost of materials, labour, hom of machineries complete asper specifications. ( excluding cost of fixtures ), atn26 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for chejja, atn46 providing and placing on terrace, polyethylene water storage tanks with manhole lidand suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flowpipes, including cost of all materials, labour, transport charges, hom of equipments and testingcomplete as per specifications.(for 1000 litre capacity) as per is 12701 1996. specification no.kbs13.22, atn39 providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications., atn29 providing matti / nandi wood frames of doors, windows, clerestory windows, ventilatorsand other frames, wrought, framed or assembled including making plaster groves ( excluding cost ofcement concrete and side clamps ), but including cost of materials, labour, hom of machineriescomplete as per specifications., atn28 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for roof slab, atn25 providing and removing centering, shuttering, strutting, propping etc., for beams

CTN :43499685

15 Jan, 2026 3.54 Lacs

Delhi - Delhi

Tender For construction of cghs dispensary (wellness centre) building i/c water supply, sanitary installation, ug sump, drainage, rain water harvesting, boundary wall i/c providing and installing ei & fans, dg set, lift, addressable fire alarm system, wet riser system, vrf air conditioning system, sub-station equipment, solar water heating system, water cooler and ups at prasad nagar, new delhi (sh: provision of round the clock security guard for watch and ward of cghs dispensary, prasad nagar site) during 2025-26.

State Government

CTN :43514799

29 Jan, 2026 NA

Jammu - Jammu And Kashmir

Tender For isi marked high density polyethylene pipes for drinking water works conforming to is 4984 2016 with up to date amendments

Central Government/Public Sector

CTN :43505440

19 Jan, 2026 NA

Gangtok - Sikkim

Tender For supply of polyethylene pipes for water supply conforming to is 4984 (q3)

Central Government/Public Sector

CTN :43505479

19 Jan, 2026 NA

Gangtok - Sikkim

Tender For supply of polyethylene pipes for water supply conforming to is 4984 (q3)

CTN :43450750

27 Jan, 2026 3.00 Crore

Bardhaman - West Bengal

Tender For supply of 200 mm nominal /outside dia high density polyethylene pipe as per is 4984/1995 , 250 mm nominal /outside dia high density polyethylene pipe as per is 4984/1995

CTN :42696145

22 Jan, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of stores for hardstanding 1000 sqm - polyethylene pipes for the supply of gaseous fuels (v2) as per is 14885 frp storage tank (v2)

Polyethylene Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector