Latest polymer coating Tenders | Government polymer coating Tenders

corporations/Associations/Others

CTN :45384823

10 Jun, 2026 2.83 Lacs

Kolkata - West Bengal

Tender For rewinding, overhauling, heat varnishing along with replacement of damaged power cables of 03 nos. chlorine booster motors, 04 nos. flocculator motors and 02 nos. floor dewatering motors at wtp-i under grww.

Central Government / Public Sector

CTN :45339400

08 Jun, 2026 NA

Secunderabad - Telangana

Tender For hq_med_sur_zrc_zonal rate contract for supply of ph:.(153045) sirolimus eluting stent cobalt - chromium stent with abluminal coating and specialised gradient coating (no polymer coating at joint & bends). bioresorbable polymer of plcl (poly lactic acid + poly caprolactone pcl) with degradation time of 3-4 months. low concentration of sirolimus (0.8ug/mm sq) should have bio-inspired open-cell. pmda approved ]

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

corporations/Associations/Others

CTN :45275625

03 Jun, 2026 3.70 Lacs

Kolkata - West Bengal

Tender For repairing, overhauling and heat varnishing of stator and rotor with necessary testing and commissioning of 580 bhp h.t. motor unit no. 2 at mullick ghat pumping station

Central Government/Public Sector

CTN :44992673

18 May, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of 10-meter measuring tape consisting of a corrosion-resistant coated steel blade of width approximately 19 mm to 25 mm with protective nylon/polymer coating, clearly graduated in both metric (mm/cm) and imperial (inch) units, with minimum readability of 1 mm and 1/16 inch respectively, conforming to class ii accuracy. the blade shall be flexible yet sufficiently rigid with a minimum standout of 2.0 meters to prevent sagging when extended, retractable, and housed in a robust and durable casing, equipped with a reliable positive locking mechanism and end hook with riveted fixing for accurate measurements. the tape shall be resistant to wear, corrosion, and deformation under normal workshop and maintenance conditions.accepted / equivalent reputed makes shall be stanley, tajima, freeman, lufkin or equivalent reputed manufacturers meeting the above specifications. [ warranty period: 30 months after the date of delivery ]

CTN :44962901

24 Apr, 2026 2.00 Lacs

Lucknow - Uttar Pradesh

Tender For procurement of hospital medicine - carotid stent - closed/hybrid cell design with flared ends of variable diameter and assorted lengths like xact with wire based filter device for protection from distal emboli, self expanding nitinol stents for carotid angioplasty - assorted sizes, mini dna extraction kit, lina skin hook small, sharp, dual pack,prestrelised (contains 5 hook) (bbqr att below), durasteel guidewire with full polymer coating available in variable tipload between 0.8-1.2gm ad variable support whisper es (bbqr att below), diltiazem 5mg/ml inj, inj pegylayted interferon alfa 2a ,, 0.35 embolisation coil with delivery system (3mm,4mm,5mm&6mm), guiding catheter inner lumen diameter of 071" in 6 f, with flexible primar curve for active enagement & storng scecondary curve for buckup support. silicone coated. double bariding, full wall technology. ebu, repositional split tip breast localization wire 20g ,107 mm, 17 gauge breast tissue marker ,coil/ribbon shape , colour coded trigger for different shapes, visible in usg, mamo, mri usfda, catheter, diagnostic angiography, hydrophilic coating, braided construction, hockey stick, 4f or 5f, 100cm, oral glycerol (85%)

CTN :44722942

14 Apr, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For development of 12 types of spares for spvs spvs. - hyd distributor mr2-4, sr6003d-(e)(u)(i)a-306114-009, development cost, testing charges, bellow, sr6003d-(s)96385-050(v), development cost, testing charges, union valve, sr6003d-521-03-460-02, development cost, testing charges, bellow sealing, sr6003d-523-35-10486(seal), development cost, testing charges, disc, sr6003d-523-35-18378, development cost, testing charges, bellows seal, sr6003d-523-35-18552, development cost, testing charges, valve disc, sr6003d-523-36-3831, development cost, testing charges, disk with polymer coating (disc)(523-35-13221), sr6003d-ipsht-755015-003, development cost, testing charges, stop straight - way valve dn40 pn25 (521-35-3382-01), sr6003d-itshl-491115-018-01, development cost, testing charges, reducing straightway union bronze valve dn6/10 pn 400 pn15, sr6003d-itshl-493171-008-01, development cost, testing charges, disc (523-36-3977), sr6003d-itshl-754062-028, development cost, testing charges, head (disc) (523-35-16317), sr6003d-itshl-755913-005, development cost, testing charges

Polymer Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government / Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector