Latest polymer roller Tenders | Government polymer roller Tenders

CTN :41075775

26 Jul, 2025 NA

Kupwara - Jammu And Kashmir

Tender For supply of running and maint of ags wayne : - replacement of old wiring of cctv cameras of ags wayne incl installation charges , supply and fix tube lights 4 ft 20w , supply and fix ceiling rose , supply and fix square block , supply and fix pvc capping casing , supply and fix 12way modular board plate make havells , supply and fix 6 way modular board plate make havells , supply and fix fan dimmer modular make havells , supply and fix 6amph switch , supply and fix 6amph 3 pin socket , supply and fix 16 amph switch , supply and fix 16 amph 3 pin socket , supply and fix blanker , supply and fix wire 2.5 sqmm poly cab oblique havells , supply and fix wire 6 sqmm poly cab oblique havells , supply and fix wire 1sqmm poly cab oblique havells , supply and fix wire 4sqmm poly cab oblique havells , supply and fix mcb 16amp , supply and fix mcb 6 amp , supply and fix 2 way modular plate havells , supply and fix flood lights , supply and fix mcb box 20 ways , supply and fix black screw 1 inch , supply and fix rowel plug , supply and fix flexible pipe , supply and fix waterproof 12mm ply to ply on school benches , apply two coat of distemper in class rooms 09 nine

corporations/Associations/Others

CTN :41080735

29 Jul, 2025 13.11 Lacs

Multi City - Karnataka

Tender For supply of safety equipment and uniforms to ugd helpers working in tcc and tools and equipments for ugd vehicles-?? ????? ? ????safety equipment for ugd assistants working in your municipal corporationand uniforms, and u.g.d. branchvijay aggarwalinstrumentssupplying (tools and equipments)sl.no.description of item123supplying of uniform: made with durable fabriclike polycotton, a plain design, including tcc logosupplying of safety helmets: helmets shell should be done shaped, smoothfinish and no metallic components are to be used made with high quality poly carbonate. brim diameter should be 6mm, peak 50mm. helmet should have slots for ventilation. number of holes should be more than 3 but the average area of all holes should not exceed 300mm2.made with high quality poly carbonate it should match the as is 2925:1984 specification standardsupplying of rubber gumboots: a durable, waterproof upper and sole, slip-resistant tread, andpotentially a steel or composite toe cap for impact protection. other important aspects are comfort features like a soft lining and a supportive insole, and compliance with relevant safety standards like is 15298 part-ii.4supplying of safety shoes: safety features such as toe protection, penetration resistance, slip resistance, and electrical properties. these specifications ensure the footwear provides adequate protection against workplace hazards. safety shoes should meets the specifications as per standards like is 15298 (part 2) and en iso 20345,supplying of n-95 mask: an n95 mask, should be adheres to the specifications outlined in is 9473:2002, - filtering half masks. this standard specifies the requirements for filtering half masks, 5 including their design, performance, and testing procedures. n95 masks meeting this standard are designed to filter at least 95% of airborne particles. a minimum 95% filtration efficiency against certain non-oil based particles, and a close facial fit to minimize leakage.unittotal quantityrates amounteach168 2200.00369600.00each84450.0037800.00each 64600.0038400.00each201100.0022000.00each2016 70.00141120.006789supplying of heavy duty rubber hand gloves: heavy-duty rubber gloves are designed for robust protection against chemicals, mechanical risks, and punctures they are commonly made from nitrile or natural rubber and often feature a cotton lining for comfort. it should meets the standard requirements of is 4770:1991supplying of cloth aprons 14-07-2025: (reflective jackets): 100% polyester 3 ply sewing thread of matching colour, h-vis reflective material, durable, breathable, lightweight and machine washable reflective material will be high visibility warning garments with synthetic slide fasteners, micro prismatic type, white or silver colour certified by the manufacturer of retro reflective material. reqired size and colour (yellow and orange) and it should meets the standard requirements of is 15809:2017supplying of heavy duty rain coat: raincoat should be waterproof, comfortable, lightweight, and have a hood. it should also be durable, with sealed seams and good breathability. and it meets the specifications, as per indian standards, are detailed in is 2422 : 2015supplying of cast iron crow bar: made of high-carbon steel can also be used. length: varies depending on application, with common lengths being 24, 30 inches, or 5-6.5 feet for greater leverage. cross-section: often hexagonal, octagonal, or round end shape: one endisusually pointed or beveled, while the other may be flat, clawed, or angled for different prying or demolition tasks weight: varies based on length and material, but generally ranges from 7 to 9 kg. hardness: heat-treated to a minimum hardness value, such as 320 hv, for durability. ndit meets the specifications, asper indian standards, are detailed in is 704: 1984supplying of spade or hoe with handle : made with high corbon steel and flat, sharp-edged 10 blade and a long handle. it's distinct from a shovel, which has a more curved, scoop-lik

Central Government / Public Sector

CTN :41082087

14 Aug, 2025 NA

Multi City - Multi State

Tender For supply of waterproof coat and trouser with full sleeves and cap/hood with sizes as per annexure-a.

State Government

CTN :40989696

19 Jul, 2025 NA

Bolpur - West Bengal

Tender For supplying of non scheduled miscellaneous items for kashinath smriti community hall (p-i) under bolpur municipality.-, "bed with head board a. bed structure ( 72"" x 78"") base frame: rectangular platform with support underneath. mattress support: plywood sheet or slatted structure. legs or box base: can be a storage box or stand-alone legs.b. headboard fixed to the bed or wall-mounted. can be plain, cushioned, or designed with cnc cut panels.3. materials usedpart material thickness notesmain structure commercial or bwp plywood 18 mm or 19 mm bwp preferred for moisture resistancesupport inside plywood or hardwood batten 1""x2"" or 2""x2"" used for framing and supporttop panel plywood sheet 1218 mm for mattress baselaminate/veneer decorative finish 0.8 mm 1 mm for aestheticsedge banding pvc/wooden strips 0.452 mm to cover edges of plywoodupholstery (optional) foam + fabric 12 inch foam for cushioned headboards4. types of plywood recommendedtype grade usemr (moisture resistant) interior budget furniturebwr (boiling water resistant) moderate water exposure bedroom, semi-wet areasbwp (boiling waterproof / marine) premium long-term durability, ideal for beds5. design options headboard types:o plain ply with laminate/veneero upholstered (foam + fabric/leatherette)o cnc-cut mdf panel over plyo backlit designs (led strip behind panel) storage bed options:o hydraulic lift-up systemo drawer storage on sideso box storage with lids", "tea table with 8 mm toughned glass????? 2. materials breakdownpart recommended material notestable top 8 mm toughened (tempered) glass heat and impact resistant, safe if brokenbase frame plywood, mdf, metal, or solid wood structure and stabilitylegs/support metal (ms/ss), wood, or ply choose as per aesthetic industrial or wooden lookfinish veneer, laminate, pu, powder coat aesthetic outer layer on wood or metaledge rubber (optional) pvc/silicon edge lining for child safety or anti-slip finish________________________________________???? 3. standard dimensionstable size width x length height suitable formedium 24"" x 36"" (60x90cm) 16""17"" standard living room.________________________________________???? 4. glass optionsfeature descriptiontype toughened/tempered safety glassthickness 8 mm (standard); strong enough for daily useedge polished edge or beveled edgecolor clear, frosted, black, bronze, grey tintedshape rectangle, square, round, oval________________________________________????? 5. design optionsa. modern wood + glass wooden or plywood frame with clear glass on top legs in straight or angled form veneer or laminate finish for sleek lookb. metal + glass ms or ss powder-coated frame industrial or minimalist design can include a second glass shelfc. storage table drawer or open shelf below glass top great for books, remotes, coastersd. cnc/cut-out ply decorative cut-out panel under the glass enhances aesthetics through transparencye. floating glass design glass mounted on metal studs, appearing to float above base", "round tea table????? 2. materials breakdownpart recommended material notestable top 8 mm toughened (tempered) glass heat and impact resistant, safe if brokenbase frame plywood, mdf, metal, or solid wood structure and stabilitylegs/support metal (ms/ss), wood, or ply choose as per aesthetic industrial or wooden lookfinish veneer, laminate, pu, powder coat aesthetic outer layer on wood or metaledge rubber (optional) pvc/silicon edge lining for child safety or anti-slip finish________________________________________???? 3. standard dimensionstable size width x length height suitable forsmall 18"" x 30"" (45x75cm) 15""16"" (3840cm) compact living spacemedium 24"" x 36"" (60x90cm) 16""17"" standard living roomlarge 30"" x 48"" (75x120cm) 17""18"" spacious interiorsheight should be roughly level with your sofa seat height.________________________________________???? 4. glass optionsfeature descriptiontype toughened/tempered safety glassthickness 8 mm (standard); strong enough for daily useedge

CTN :40955691

11 Jul, 2025 5.73 Lacs

Multi City - Karnataka

Tender For supply of material and machinaries the construction of sanjeevini shed in kannal village of athani taluka - atn25 providing and removing centering, shuttering, strutting, propping etc., for beams, atn28 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for roof slab, atn29 providing matti / nandi wood frames of doors, windows, clerestory windows, ventilatorsand other frames, wrought, framed or assembled including making plaster groves ( excluding cost ofcement concrete and side clamps ), but including cost of materials, labour, hom of machineriescomplete as per specifications., atn39 providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications., atn26 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for chejja, atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specificaiton, providing and applying two coats dry distemper of approved brand, and shade on wall surface including priming coat and whitening after throughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications, providing and fixing in position in cement concrete steel glazed windows and ventilators side hung/top hung fully openable as per approved drawings, providing and fixing glazed vitrified tiles of approved make, quality and colour of size 600x600x10mm thick, providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm, providing and fixing in position brass bib cock of approved quality 20mm nominal bore, atn40 providing and fixing white vitreous china clay, water closet orissa pattern of size 580 x440mm with integral type footrests, 100mm s or p trap, 10 litre low level, p.v.c flushing cistern ( all areapproved make ) with fittings, c.i / m.s brackets, 32mm diameter flush pipe fittings and clamps, overflowarrangements with special and 25mm mosquito proof coupling of approved design, painting of fittingsand brackets, cutting and making good the wall and floor wherever including cost of material, atn41 providing and fixing white vitreous china clay, flat back wash basin size 550x400mmwith a pair of 15mm c.p brass pillar taps with c.i / m.s brackets, 32 mm c.p. brass waste of standardpattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required,including cost of materials, labour complete as per specifications., ceramictiles 30x 30 cms morb25, pvc pipe of 4kgcum75 mm morb35, broken stone aggregate 40 mm size shgmatamarii0609, broken stone aggregate 20 mm size shgmatamarii0609, broken stone aggregate 12 mm to 10 mm size shgmatamarii0609, coarse sand zone iii shgmatamarii0609, portland cement shgmatamarii0609, plasticizer super plasticizer shgmatamarii0609, burnt bricks class 35 non modular shgmatamarii0609, solid concrete block 40x15x20 cms 5nsqmm shgmatamarii0609, tmt bars fe 500 shgmatamarii0609, pvc pipe of 10kgcum110 mm, pvc pipe of 6kgcum 63 mm, atn11 binding wire, atn13 rubble stones, atn14 bond stone 20 x 20 x 45 cm, atn15 mixer (concrete small used in culvert), atn7 mixer (concrete) - 1 cum capacity, atn9 hom of vibrator 0.71 days, atn46 providing and placing on terrace, polyethylene water storage tanks with manhole lidand suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flowpipes

CTN :40955695

11 Jul, 2025 6.36 Lacs

Multi City - Karnataka

Tender For supply of materials and machinery for contruction of kitchen shed at higher primiry school in kannal villege of athani taluka - atn3 broken stone aggregate 40 mm size, atn4 broken stone aggregate 20 mm size, atn5 broken stone aggregate 12 mm to 10 mm size, atn2 coarse sand (zone iii), atn6 portland cement, atn7 mixer (concrete) - 1 cum capacity, atn15 mixer (concrete small used in culvert), atn8 plasticizer / super plasticizer, atn9 hom of vibrator 0.71 days, atn13 rubble stones, atn14 bond stone 20 x 20 x 45 cm, atn22 burnt bricks class 35 (non modular), atn10 tmt bars fe 500, atn11 binding wire, atn46 providing and placing on terrace, polyethylene water storage tanks with manhole lidand suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flowpipes, including cost of all materials, labour, transport charges, hom of equipments and testingcomplete as per specifications.(for 1000 litre capacity) as per is 12701 1996. specification no.kbs13.22, atn25 providing and removing centering, shuttering, strutting, propping etc., for beams, atn28 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for roof slab, atn26 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for chejja, atn30 providing and fixing in position fully panelled matti / nandi wood shutters for doors, stylesand rails of 30mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as perdrawing and panels of 20mm thick including cost of materials, labour, hom of machineries complete asper specifications. ( excluding cost of fixtures ), atn29 providing matti / nandi wood frames of doors, windows, clerestory windows, ventilatorsand other frames, wrought, framed or assembled including making plaster groves ( excluding cost ofcement concrete and side clamps ), but including cost of materials, labour, hom of machineriescomplete as per specifications., atn39 providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications., atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, ceramic tiles 30 30 cms ngl, pvc pipe of 4kg per cum 75 mm ngl, providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specificaiton, providing and applying two coats dry distemper of approved brand, and shade on wall surface including priming coat and whitening after throughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications, providing and fixing in position in cement concrete steel glazed windows and ventilators side hung/top hung fully openable as per approved drawings, providing and fixing glazed vitrified tiles of approved make, quality and colour of size 600x600x10mm thick, providing and fixing in position black cuddapah slab / shahabad slab / thandur blue slab 4 cms thick, fabricating, supplying and erecting m.s. tubulartruss, providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm, providing and fixing in position brass bib cock of approved quality 20mm nominal bore, providing and installing of pre painted galvalume iron trapezoidal profiled sheet

Central Government/Public Sector

CTN :40932614

01 Aug, 2025 NA

Agra - Uttar Pradesh

Tender For supply of rain coat with cap/hood and separate waterproof touser as per attached speci fication and drawing. [ warranty period: 30 months after the date of delivery ]

CTN :40870577

18 Jul, 2025 NA

Burdwan - West Bengal

Tender For supply of grooming brush large , grooming brush small , towel hand , comb , blanket , neck collar large , neck collar medium , neck collar with stud , rubber ball , muzzle cover leather , box steel , lock , dumbell wooden , leather gloves , torch metal , torch cell , silent whistle , side leash rope , side leash leather , side leash nylon , tracking leash , training leash , chain choke collar , body harness , coat waterproof

CTN :39481967

31 Jul, 2025 NA

Dehradun - Uttarakhand

Tender For corrigendum : supply of veterinary instruments and equipments - allis tissue forceps (20 cm.), artery forceps curved (15 cm ), artery forceps straight (15 cm ), forceps s.s. (20 cm), forceps s.s.(15 cm), haemostat straight s.s.(17.5 cm), haemostate curved s.s. (15 cm. ), mayo s scissors curved isi (s.s. 15cm), mayo s scissors straight isi (s.s. 15cm), scissors straight s.s.(12.5 cm), scissors straight s.s.( 17.5 cm), surgical gloves (standard), surgical mask (standard), suturing needle (assorted size) (traumatic/atraumatic cured/st.), suture thread silk/ nylon (10 mt. reel no.100, 0, 1, 2, 3), chromic cat gut (100, 0, 1, 2, 3 no.), needle holder s.s.(15cm), instrument trolly, dressing drum s.s. round 20 gauge (height 30cmx30cm dia.), b.p. blades (no. 22, 23, 24, 11, 12, 13,14, 16, b.p. handle s.s.(no. 3 ), b.p. handle s.s.(no. 4), kidney tray s.s.(15 cm length), tray small ss (250mmx300mm), hypodermic needle (15 x3/4"), hypodermic needle (18 x3/4"), vaccutainer with needle (with vacuum, 10 ml and needle of double bewell 16 no.), electrcally operated needle and syringe destroyer. destruction rate max. 1 minute per needle of 1.6 mm thickness with 80 mm length. min. 350 cutted hubs of syringes with needle burnt residue., bloodless castrator for small animals 9 (made of special high carbon steel coated for protection against rust formation), castrator imported, i/v fluid stand (s.s.), intra venous set (disposable 0 standard) ), scalp vein set (21 no. 0 22 no.), electric dehorner (30 cm length), trocar canula for sheep s.s.(15 cm), teat syphon (ss), drenching bottle (large) (metal 500 m), drenching bottle (small) (metal 200 ml), doctor coat tericot (free size), plastic apron, macentosh sheet (double colour), rubber arm sleeves with latex gloves (no. 9), gum boot, dog muzzle (assorted size), dog nail cutter (standard), measuring cylinders (50 ml graduated borosil glass ), measuring cylinders of (100 ml graduated borsil glass ), medicine carry bag (nylon 600 dpu coated padded, multipocket for medicine and surgical equipments ), jar with lid ss (2 kg. capacity), jug ss (2 ltr. cap.), thermos s.s. double insulated (1 ltr. cap., 30cm length, 7.5cm mouth dia with soulder carrying strap.), bucket ss (12 ltr capacity), california mastitis kit, centrifuge machine (bench top) for general purpose, canopy tent with carrying bag. frame made of steel powder coated pipe (23 gauge) 0 tetron cover (waterproof) with two folding chairs and one folding table, vaccine carrier (1.6 lit capacity with 4 ice packs), microscope binocular, autoclave electric, calf puller ss 316/304., animal catching device, cold boxes vaccine storage capacity 20 ltr. weight fully loaded 43.3 kg. empty weight 17.5 kg. external surface material plastic, internal lining material plastic , insulation material polyurathene, insulation thickness 110 mm,, refrigerator, thermocautery, veterinary urine analyzer with accessories, animal sling for large animals, cold cabinet/ cold room with 25% capacity of racks as deep freezer and 75 % as cold cabinet having 2-8 degree celcius temperature, digital display, alarm system for temp. beyond set point, hematology analyzer with accessories (three parts), semi automatic veterinary serum analyzer with accessories, verticle cold cabinets for vaccine storage, with storage temperature 2-8 degree celcius. temperature holding time atleast 12 hrs, at power failure. adjustable shelves., hot air oven, incubator, ice liner (ice lined refrigerator or freezer) compressor compartment0 hermetically sealed high quality compressor 230 v 50/60 hz. relatively noise less fan to cool down the compressor. all steel tubes protected with special compound against rust formation. 1 thermostate pre-stetted from the factory for 2 c - 8 . control panel situated at the front of the unit. light indicators for different functions, 1 digital thermometer to indicate the internal temperature, latest cooling system. insulation with thick polyurethane foam. foaming agent- cyclo

Polymer Roller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government / Public Sector

State Government

Central Government/Public Sector