Latest polymer Tenders | Government polymer Tenders

Central Government And Public Sector

CTN :45092165

18 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of water soluble polymer quench oil ilo quench 700 aqua of castrol make or equivalent shall have following properties. i) typical characteristics of product. a) density at 15 deg c : 1032 to 1040 kg/m3. b)ph distilled water (15%) to be 9.0 to 9.7. c ) reffractive index to be 1.36 to1.42. d) appearance to be viscous cloudy, e) color to be clear yellow. ii) typical operating conditions: 1) concentration in dm water of tds below 100 ppm & chlorides below 40 ppm to be 10% 2) bath temperature : 25 to 55 deg c. special conditions: i) the supplier should give certificate to the effect that the product offered is ilo 700 aqua of castrol make or equivalent. the refractive index after mixing shall not vary more than 2% on environmental issues. ii) five axles shall be quenched in dm water with 10% of polymer oil for 30 minutes duration at a bath temperature below 55 deg.c. the mechanical properties at mid radius of axle length should meet the requirements specified at clause 7.2,7.4 of irs r43/1992 specification and micro structure should reveal fine pearlite structure. ]

CTN :45298298

01 Jun, 2026 NA

Liluah - West Bengal

Tender For supply of industrial socket/receptacle as per following specification : 1) category: low voltage; 2) polesdescription: 3p+n+e; 3) shape: angled 20 degree inclination; 4) mounting mode: panel mounted, 5) rated current: 125amp; 6) rated operational voltage: 380 to 415v ac; 7) frequency: 50/60hz; 8) degree of protection: ip 67; 9) plug housing material: self extinguishing engineering polymer; 10) contact material: stainless steel springs, nickel plated brass sleeves, stainless steel pin; 11) standards: iec:60309-2 . make : jaibalaji/mv electrosystems/ garo or exactly equivalent in all dimension and rating. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45335075

05 Jun, 2026 NA

Perambur - Tamil Nadu

Tender For srphc82281240-coronary drug eluting stents with (1) stent on cobalt chromium alloy or platinum chromium alloy. (2) stent with coating of polymer carrier for active drug ( sirolimus everolimus or zotarolimus shown to be effective in preventing neo-intimal hyperplasia) (3) stent diameter should be from 2.5mm to 4mm and length of the stent should be 12mm to 48mm. (4) the strut thickness should be 91 micron or less. (5) stent delivery system should be monorail (single operator exchange or rapidexchange). (6) stent should be compatible with 5fr guiding catheter (7) stent design should be open cell type. (8) stent should be approved by dcgi. the copy of dcgi approval should be enclosed in the tender bid. (9) the long term efficacy and safety of the stent in terms of target vessel revascularisation (tvr) and in-situ thrombosis (ist) should be documented / published in peer reviewed scientific journals. (10) the documents related to the efficacy and safety of the stent should be only for the brand that is offered in the tender bid (11) the manufacturer/supplier should submit proof of supply of thestent to a major government institute. unit:no [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45337132

01 Jun, 2026 NA

Dibrugarh - Assam

Tender For supply of water hose synthetic thermoplast polymer for passenger coaches, size 50mmx15m long, mat specification icf/md/spec-112-rev01 with 2 amend or latest. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45338634

01 Jun, 2026 NA

Vadodara - Gujarat

Tender For supply of set of polymer buffer spring pack consisting of 03 items no.- 16,17 &18 (in assembled condition) as per icf drg. no.- icf/std-2-2-015, alt.- a/nil, col.- ii & consisting of 02 items no.- 19 & 20 (in assembled condition) as per icf drg. no.- icf/td-2-2-015, alt.- a/nil, col.-iii. material specn. conforming to icf specn no.- icf/md/spec-353 issue status-01 of october- 2018 with amendment no.-1 of august 2019 [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45339400

08 Jun, 2026 NA

Secunderabad - Telangana

Tender For hq_med_sur_zrc_zonal rate contract for supply of ph:.(153045) sirolimus eluting stent cobalt - chromium stent with abluminal coating and specialised gradient coating (no polymer coating at joint & bends). bioresorbable polymer of plcl (poly lactic acid + poly caprolactone pcl) with degradation time of 3-4 months. low concentration of sirolimus (0.8ug/mm sq) should have bio-inspired open-cell. pmda approved ]

CTN :45303274

13 Jun, 2026 4.10 Lacs

Thiruvarur - Tamil Nadu

Tender For supply of special polymer film for automatic cutting machine specn: product code no. polywrap-9225& type of mate

CTN :45307724

02 Jun, 2026 NA

Chittoor - Andhra Pradesh

Tender For supply of foldable quadcopter frame , motor brushless , esc with oneshot , propellers , gps , power module , remote control with camera , flight controller , pdb with bec 12v , lithium polymer battery , multi charger

Central Government/Public Sector

CTN :45291377

12 Jun, 2026 45.84 Lacs

Cuddapah - Andhra Pradesh

Tender For supply of earth work in excavation , filling available excavated earth excluding rock , demolishing rcc work , providing and laying in position cement concrete , providing and laying in position specified grade of reinforced cement concrete , supplying and filling in plinth with sand under floors , steel reinforcement for rcc work , centering and shuttering including strutting lif in foundations footings bases of columns , centering and shuttering including strutting lif columns pillars piers abutments posts and struts , dry stone pitching 22 point 5 cm thick , neat cement punning , demolishing brick work , brick work with non modular fly ash bricks , finishing walls with textured exterior paint , finishing walls with 100 percentage premium acrylic emulsion paint , 15 mm cement plaster , random rubble masonry with hard stone , structural steel work riveted bolted or welded in built up , surface dressing of the ground including removing vegetation , removing white or colour wash by scrapping , providing and fixing glass panes with putty and glazing clips in steel doors , providing and fixing glazing in aluminium door window ventilator shutters , providing and fixing aluminium work for doors windows ventilators , providing and fixing gi chain link fabric fencing , providing and fixing ist quality ceramic glazed wall floor tiles , grading roof for water proofing treatment with cement concrete , repair to plaster of thickness 12mm to 20 mm in patche , providing and laying water proofing treatment on roofs of slabs , 0 mm thick factory made polyvinyl chloride pvc door shutter , providing and fixing factory made panel pvc door shutter consisting of frame , providing and fixing on wall face unplasticised rigid pvc rain water pipes , providing mixing and applying sbr polymer , providing and injecting approved grout 2 percentage of weight of cement used modified cement slurry made with non shrink compound in concrete rcc work , providing and injecting approved grout cement slurry made with shrinkage compensating cement in concrete rcc work , providing and injecting approved grout epoxy injection grout in concrete rcc work of approved make , providing laying spreading and compacting graded stone aggregate

CTN :45214129

28 May, 2026 NA

Udhampur - Jammu And Kashmir

Tender For corrigendum : supply of flt controller programming stn , battery charging and testing stn , digital display with flt log software , polymer cnc sheets , acrylic stand , digital vinyl stickers size 3 ft x 3 ft , vinyl sun boards size 4 ft x3 ft , one way vision flex 4 ft x 3 ft , steel board with writing size 4 ft x3 ft , flex board size 5 ft x3 ft , flex board direction size 4 ft x 3 ft , flex board unit banner size 15 ft x18 ft , flex board size 12 ft x 10 ft , name plate size 10 inch x15 inch

Polymer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector