Latest polyseal Tenders | Government polyseal Tenders

CTN :40837069

15 Jul, 2025 NA

Liluah - West Bengal

Tender For supply of channel for rubber clading l=11400 as per rdso drg. no. rdso/cg/drg/21010 item no. 0 1.items to be supplied with red oxide zinc chromate primer coating. note:- material to be supplied in piec es of 2850 mm length. (04 pieces in one number). [ warranty period: 30 months after the date of deliver y ]

CTN :40848008

09 Jul, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of additional lashing hook assembly to rdso drg no rdso/cg/drg/21009 item no 24. item to be supplied with red oxide zinc chromate primer coating. note: material grade for is:2062 is is:2062 e250 quanlity a.

CTN :40693318

21 Jul, 2025 NA

Delhi - Delhi

Tender For corrigendum : purchase of consumable items group d pediatric cardiac catheterization and interventions on 2 year rate contract basis for the department of cardiology - group d1 puncture needle & introducer sheath for neonates & children, item no. 1: intravenous cannula for neonates, item no. 2: intravenous cannula for children & adults, item no. 3: puncture needle for neonates & children, item no. 4: micropuncture needle with stainless steel guidewire for neonates & children, item no. 5: micropuncture needle with hydrophilic guidewire for neonates & children, item no. 6: micropuncture introducer set for neonates & children, item no. 7: introducer sheath with introducer wire for children, item no. 8: introducer sheath with straight introducer wire for children, item no. 9: introducer sheath with j tip introducer wire for children, item no. 10: introducer sheath with hydrophilic guidewire for children, item no. 11: special introducer sheath with extrathin wall, item no. 12: chiba or chiba type puncture needle for fetal interventions, diagnostic catheters for neonates & children, item no. 1: judkins catheter for children, item no. 2: special judkins coronary catheter with smaller curves for children, item no. 3: pigtail catheter for children, item no. 4: angled pigtail catheter for children, item no. 5: marker pigtail catheter for children, item no. 6: multipurpose catheter for children, item no. 7: picard catheter for children, item no. 8: cobra catheter for children, item no. 9: cournand catheter for children, item no. 10: nih catheter for children, group d3 (special diagnostic catheters for neonates & children), item no. 1: balloon floation catheter (swan ganz type) for neonates and infants, item no. 2: balloon floation catheter (swan ganz type) for children, item no. 3: balloon tipped angiography (berman) catheter for neonates, infants, item no. 4: balloon tipped angiography (berman) catheter for children, item no. 5: reverse berman catheter, item no. 6: diagnostic catheters with special hydrophilic coating, item no. 7: renal double curve catheter, item no. 8: head hunter catheter, item no. 9: simmons/ sidewinder catheter, item no. 10: sos omni selective catheter, group d4 (guiding catheters for neonates & children), item no. 1: judkins right coronary guiding catheter for neonates & children, item no. 2: renal guiding catheter for neonates & children, item no. 3: multipurpose guiding catheter for children, item no. 4: special guiding catheters (other than judkin s coronary curves), item no. 5: guiding catheters with hydrophilic coating for neonates and children, item no. 6: special short length guiding catheters for infants and children, group d5 (long sheath for interventions), item no. 1: mullins sheath without side arm of 4- 9 fr sizes for structural intervention, item no. 2: mullins sheath with side arm: 4- 8 fr, item no. 3: mullins sheath with side arm: 4-8 fr, item no. 4: mullins sheath with side arm: 9- 12 fr, item no. 5: mullins sheath with side arm:>12 fr size, item no. 6: long sheath with side arm:hausdorf curve, item no. 7: long sheath with side arm:balkin curve, item no. 8: special long sheaths with side arm: other than mullins curve, item no. 9: special braided long sheaths with side arm: other than mullins curve, item no. 10: long sheaths with deflectable tip, item no.11: long sheath for carotid intervention, group d6 (valvuloplasty balloon), item no. 1: percutaneous transluminal valvuloplasty balloon (low burst pressure) manufactured in india, item no. 2: percutaneous transluminal valvuloplasty balloon (low burst pressure) usfda approved, item no. 3: percutaneous transluminal valvuloplasty balloon (low burst pressure) ce marked, item no. 4: percutaneous transluminal valvuloplasty balloon (low burst pressure) manufactured in india, item no. 5: percutaneous transluminal valvuloplasty balloon (low burst pressure) usfda approved, item no. 6: percutaneous transluminal

CTN :40821470

30 Jun, 2025 4.95 Lacs

Hanumangarh - Rajasthan

Tender For supply of bal vatika equipments with installation total 5 works rawatsar - excavation by labour including loading, unloading, disposal soil within initial lead 50 meters and lift up to 1.50 meters in dry or moist including dressing of exacavted area. back filling and dewatering wherever required complete all respect, (hard soil). (bsr item no. 2 b). in hard soil, 1:2:4 , , , , , 1:3 (item no 13a), four seater mgr:- providing and fixing of four seater mgr swing of size 4/5 feet (diameter), 3 feet (height) fabricated with a center pipe/ frame of 50 nb shall be made from c class g.i. pipe and frp material. the bottom shall be welded with support of m.s. round plate of 250 mm & 10mm thickness. the bottom frame of 32nb shall be made from c class g.i. pipe. the handle frame of 25nb shall be made from c class g.i. pipe. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 50 nb c class welded with m.s. round plate of 250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (the cement concrete and excavation work shall be paid separately). (non bsr item no. 01, dwdsc/2021-22/6329-443/04.03.2022)., circular swing four seater:- providing and fixing of circular swing four seater of size 6.0 x 5.25 x 5.0 feet fabricated with a center pipe/ frame of 65 nbshall be made from c class g.i. pipe and frp material. the bottom shall be welded with support of m.s. round plate of 250 mm & 10mm thickness. the bottom frame of 32nb shall be made from c class g.i. pipe. the handle frame of 25nb shall be made from c class g.i. pipe. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 65 nb c class welded with m.s. round plate of 250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (the cement concrete and excavation work shall be paid separately). (non bsr item no. 02, dwdsc/2021-22/6329-443/04.03.2022)., four seater see saw:-providing and fixing of four seater see saw of size 5.5 x 6.25 x 2.5 feet fabricated with a center pipe/ frame of 50 nb shall be made from c class g.i. material. the bottom shall be welded with support of m.s. round plate of 250 mm & 10mm thickness. the bottom frame of 32nb shall be made from c class g.i. pipe. the handle frame of 25nb shall be made from c class g.i. pipe. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 50 nb c class welded with m.s. round plate of 250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders from ackzonoble or be

Central Government/Public Sector

CTN :40809767

30 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of low voltage panel cover conforming to edts-355, rev-1 for lhb non ac coaches as per drawing no. cc72081 item no. 8 & 9. material as per is 2062 with powder coating. [ war ranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40803251

18 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply of side sill of lhb coaches as per drg. no. le 11182 alt. c. item to be supplied with red oxi de zinc chromate primer coating. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40211295

28 Jun, 2025 NA

Chittorgarh - Rajasthan

Tender For corrigendum : tender for supply of / 9 9 % % anti corrosion or erosion putty - supply of high build anticorrosive immersion grade epoxy putty-coating make- itw devcon - belzona - henkle - stanvac chemical india ltd as per detail technical specification enclosed , supply of primer for item no 1 high build anticorrosive immersion grade epoxy coating- putty make- itw devcon - belzona - henkle - stanvac chemical india ltd as per detail technical specification enclosed , supply of high performance brushable ceramic metal surface putty-coating make- itw devcon - belzona - henkle - stanvac chemical india ltd to protect metal from erosion- pitting- cavitation as per detail technical specification enclosed , supply of wear resistant ceramic- metal rebuild putty of make- itw devcon - belzona - henkle - stanvac chemical india ltd for repair wear parts- pitting as per detail technical specification enclosed , application of item no. 1 item no. 2 item no. 3and item no. 4 on pump column pipes surfaces- equipments including cleaning the surface of all dirt , dust , rust and other foreign matter by mechanical cleaning and grit blasting as per detail procedure enclosed

Central Government/Public Sector

CTN :40362811

21 Jun, 2025 NA

Bhopal - Madhya Pradesh

Tender For bid to ras supply of item# 1: 1 mm dia enamelled copper conductor to aa28145 (medium coating) ; pvc ratio- 1: 1 , item# 2: 1.25 mm dia enamelled copper conductor to aa28145 (medium coating) ; pvc ratio- 1: 1 , item# 3: 1.32 mm dia enamelled copper conductor to aa28145(medium coating) ; pvc ratio- 1: 1

Central Government / Public Sector

CTN :40781302

18 Jul, 2025 NA

Vijayawada - Andhra Pradesh

Tender For set of items required for maintenance of electronic pcbs & other electronic assemblies as foll ows. (a) electronic component cleaner co2 spray(pcb cleaner) as per the following specifications. qty/set. = 01 no. 1) colour : water white; 2) aromatics, vol% : 0; 3) non volatiles, ppm : < 100; 4) kb value : > 30; 5) di-electric constant, 25 degree c : 1.8; 6) density, g/ml, 25 degreec : 0.67+/- 0.02; 7) surface tension @ 20 degreec, mn/cm : <20; 8) copper strip corrosion, 3 hr, 50 degreec : passes test; 9) flash point, degree c : <-15; 10) voc content, % : > 95; 11) spray rate, g/min. 53 +/- 3degreec : 60 - 85; 12) filled can pressu re, psig, 53 +/- 3degreec : 50 - 80; 13) item shall be packed in cans of 500 ml.(net weight of 318 grams ap proximately). makes: stanvac/aerol/loctite. (b) conformal coating spray as per the following specifications. qty/set. = 01 no. 1) appearance of dried film : glossy clear transparent film; 2) di-electric withstand voltag e at 1500v, leakage current, microamps : 4.6 to 5.6; 3) tack free time, minutes(@25 degreec/ 50% rh app rox.) : < 15; 4) cure time, rt hours : 24; 5) coating thickness,(02 coats), microns : > 35; 6) insulation resist ance(500v dc) : 1.1 x 10 (power12) to 1.6 x 10 (power12); 7) spray rate, g/min. 53 +/- 3degreec : 60 - 90; 8) filled can pressure, psig, 53 +/- 3degreec : 50 - 85; 9) item shall be packed in cans of 429 ml. approxim ately(net weight of minimum 300 grams or above). makes: stanvac/aerol/loctite. note: one sample of eac h item should be got approved before effecting bulk supply. [ warranty period: 30 months after the date of delivery ]

CTN :40745180

01 Jul, 2025 NA

Dewas - Madhya Pradesh

Tender For providing and fixing gym item in shivshakti nagar at ward no.9 dewas - items :, double chest press product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., leg press double - product area :-1676mm x610mm x 1524mm safe playarea:- 2286mm x 1220mm leg press equipment made up of4inch b class gipipe; prime stand duly bend,9506 13800038000foundation center pipe. the remaining frame is made of42mm od g.i. pipe. ms seat of size 380mm x 300mm x5mm is used. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., shoulder press / double chest cum -product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings9506 14500045`0006205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness.seating puller, sky walker / straight trainer/crosstrainer -product area :-l x w x h1778mm x 610mm x 1828mmsafe play area:- 2134mm x 915mm straight trainer/sky walkerequipment made up of 4inch b class gi pipe; prime stand dulybend, foundation center pipe. the pedal frame is made of 3" x 1"rectangular g.i.pipe. the handle frame is made of 32mmod g.i. pipe. footrest frame support of dimension250 x 100 x 2mmis welded for supporting the aluminiumfootrest. aluminium footrest of size 300mm x150mm x 5mm isused for supporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tighten9506 14000040000the closing cap. closing cap of hdpe / ppcp plastic isused. high quality rubber grip are also usedfor firm handling., double air walker - product area :-2130mm x785mm x 1390mm safe playarea:- 2590mm x 1024mm double air walker equipmentmade up of 4inch b class gi pipe;prime

Polyseal Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government / Public Sector