Latest polythene cap Tenders | Government polythene cap Tenders

Central Government/Public Sector

CTN :45708987

03 Jul, 2026 NA

Palakkad - Kerala

Tender For supply of diaphragm cases - items, diaphragm case for va5rt(m), diaphragm case for va5rt

corporations/Associations/Others

CTN :45702242

07 Jul, 2026 17.03 Lacs

Kota - Rajasthan

Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh

Corporations / Associations / Others

CTN :45635698

03 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For corrigendum : supply of wooden packing cases and crates (as per bhel drawings) (q3)

CTN :45720879

16 Jul, 2026 NA

Multi City - Rajasthan

Tender For supply of glass wares, polythene wares and miscellaneous items at ssctpp, suratgarh - polythenewarebottle polythene (pp) wide mouth with cap(i)size- 1000 ml (pkt of 6), polythenewarebottle polythene (pp) wide mouth with cap(ii)size- 500 ml (pkt of 12), polythenewarepipette stand horizontal (12 pipettes) pkt (each 6pcs), polytheneware :- retort standside hole each (225mmx125mm), polytheneware :- retort standside hole each (300mmx200mm), polytheneware :- retort standcenter hole each (300mmx200mm), polytheneware :- volumetric flask(i) size- 50 ml pkt (each 3 pcs), polytheneware :- volumetric flask(i) size- 100 ml pkt (each 3 pcs), polytheneware :- volumetric flask(i) size- 250 ml pkt (each 3 pcs), polytheneware :- volumetric flask(i) size- 500 ml pkt (each 3 pcs), polytheneware :- volumetric flask(i) size- 1000 ml pkt (each 2 pcs), polytheneware :- burette clamp mild steel chrome plated fisher type with boss head, single pkt (each 12 pcs), polytheneware :- burette(i) size- 25 ml, polytheneware :- burette(i) size- 50 ml, polytheneware :-pipette bulbs, polytheneware :- silicone pipette bulbs, polytheneware :- beaker polythene pp auto clavable(i) beaker polythene capacity 100ml,pp autoclaveable (nos.), polytheneware :- beaker polythene pp auto clavable(i) (ii)beaker polythene capacity 1000 ml,pp autoclaveable 1 pkt (pack of 06), polytheneware :- beaker polythene pp auto clavable(i) (iii)beaker polythene capacity 250ml,pp autoclaveable 1 pkt (pack of 12), polytheneware :- beaker polythene pp auto clavable(i) (iv)beaker polythene capacity 500 ml,pp autoclaveable 1 pkt (pack of 12), polytheneware :- wash bottle ldpe plastic 1000ml, polytheneware :- wash bottle ldpe plastic 500ml, polytheneware :- latex bladder enkay no.5 with clip, polytheneware :- chloroform bladder 500 ml, polytheneware :- dropper sterile capacity 3ml 1 pkt (each 100 pieces), polytheneware :- dropping bottle- blow in low density polythene 60 ml, polytheneware :- dropping bottle- blow in low density polythene 125 ml, polytheneware :- measuring cylinder 50 ml, polytheneware :- measuring cylinder 100 ml, polytheneware :- measuring cylinder 500 ml, polytheneware :- measuring cylinder 1000 ml, glassware:- circular capsules fused silica without lid 48 x 15 (20 ml), glassware:- dishes culture petri (i) size -80 17 mm, glassware:- dishes culture petri (ii) size -150 20 mm, glassware:- dishes culture petri (iii) size -100 17 mm, glassware:- crucible fused silica for vm + lid 25x22x38 mm, glassware:- beaker grifin, low form, with spout, graduated (i) 1000 ml, glassware:- beaker grifin, low form, with spout, graduated (ii) 500 ml, glassware:- beaker grifin, low form, with spout, graduated (iii) 250 ml, glassware:- beaker grifin, low form, with spout, graduated (iv) 100 ml, glassware:- pipette measuring (mohr type) accuracy as per class -a with certificate 01 ml, glassware:- pipette measuring (mohr type) accuracy as per class -a with certificate 02 ml, glassware:- pipette measuring (mohr type) accuracy as per class -a with certificate 05 ml, glassware:- pipette measuring (mohr type) accuracy as per class -a with certificate 10 ml, glassware:- pipette measuring (mohr type) accuracy as per class -a with certificate 25 ml, glassware:- measuring cylinder-single matric scale with pour out 50 ml, glassware:- measuring cylinder-single matric scale with pour out 100 ml, glassware:- measuring cylinder-single matric scale with pour out 500 ml, glassware:- measuring cylinder-single matric scale with pour out 1000 ml, glassware:- burette - boroflo , screw thread with ptfe key 100 ml, glassware:- burette - boroflo , screw thread with ptfe key 50 ml, glassware:- burette - boroflo , screw thread with ptfe key 25 ml, glassware:- burette - boroflo , screw thread with ptfe key 10 ml, glassware:- volumetric flask with stopper 1000 ml, glassware:- volumetric flask with stopper 500 ml, glassware:- volumetric flask with stopper 250 ml, glassware:- volumetric flask with stopper 100 ml, glassware:- fun

CTN :45733171

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no.m.mms.exmp.d & i.06.2026-27.05 description- mixed ferrous melting scrap amalgamating the various types consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes. structural sections, scrap low phosphorous steel, iron pipes, bar fittings, buffer cases and plungers (other than cast steel) sleeves and spindles with heads, screw couplings, tie bars, all types of equalising beams & centralize beams, fish plate other than cast steel), wire & wire rope, all types of sleeper, all types of bars and rods, junk kutchra, steel fabrication, nut bolt, grease seal etc. (our offer): mixed ferrous melting scrap amalgamating the various type consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes, structural sections, lever, scrap low phosphorous steel, iron pipes, bar fittings, flap door, irs sleepers, shaft, wire rope, pipes, brake cylinder, buffer cases and plungers other than cast steel sleeves and spindles with heads, screw couplings, tie bars, all types of centralize beams, pendrol clip, fish plate other than cast steel, all types of bars and rods, junk kuchra, steel fabrication, nut bolt, grease seal etc., as in the lot. materials are laying in one place at "d-1" sector & two places at "i-2" sector. before bidding, bidders are requested to inspect the lot. cutting may be allowed only for off sizes for loading purpose. loading will be done by purchaser's own arrangement.

CTN :45733175

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no.y.mms.exmp.f-1.06.26.56 description- mixed ferrous melting scrap amalgamating the various type consisting of scrap classes like- fresh plate & sheets plate cuttings and shearing of all shapes and sizes structural sections.scrap low phosphorous steel .iron pipes .bar fittings .buffer cases and plungers (other than cast steel ) sleeves and spindles with heads .tie bars .all types of equilising beams & centralize beams , wire and fish plate other than cast steel.wire & wire rope,all types of chains, all types of sleeper ,shock observer some quantity of negligeable nf item may be attached , all types of bars & rods. junk kutchra, spring wire , screw couplings, steel fabrication and misc, nut bolt,grease seal etc. as in the lot (above item may or may not be available in the lot) [loading will be done by purchaser's own arrangement]

CTN :45733176

07 Jul, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no.m.mms.exmp.f & g.06.2026-27.04 description- mixed ferrous melting scrap amalgamating the various types consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes. structural sections, scrap low phosphorous steel, iron pipes, bar fittings, buffer cases and plungers (other than cast steel) sleeves and spindles with heads, screw couplings, tie bars, all types of equalising beams & centralize beams, fish plate other than cast steel), wire & wire rope, all types of sleeper, all types of bars and rods, junk kutchra, steel fabrication, nut bolt, grease seal etc. (our offer): mixed ferrous melting scrap amalgamating the various type consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes, structural sections, lever, scrap low phosphorous steel, iron pipes, bar fittings, flap door, irs sleepers, shaft, wire rope, pipes, brake cylinder, buffer cases and plungers other than cast steel sleeves and spindles with heads, screw couplings, tie bars, all types of centralize beams, pendrol clip, fish plate other than cast steel, all types of bars and rods, junk kuchra, steel fabrication, nut bolt, grease seal etc., as in the lot. materials are laying in one place at "f" sector & one place at "g-1" sector before bidding, bidders are requested to inspect the lot. cutting may be allowed only for off sizes for loading purpose. loading will be done by purchaser's own arrangement.

CTN :45718847

16 Jul, 2026 11.44 Lacs

Jaipur - Rajasthan

Tender For supply of glass wares, polythene wares and miscellaneous items at ssctpp, suratgarh- bottle polythene (pp) wide mouth with cap , burette , burette clamp mild steel chrome pla type with boss head, single pkt (ea , center to (300mmx). , pipette bulbs , pipette stand horizontal (12 pip , retort stand , side hole (225mmx , side hole (300mmx , silicone pipette bulbs , volumetric flask , (ii)beaker polythene capacity 1000 ml,pp autoclaveable , (iii) beaker polythene capacity 250ml,pp autoclaveable , (iii)beaker polythene capacity 500 ml,pp autoclaveable , , , beaker polythene pp auto clavable , blow in low density polythene 125 ml , blow in low density polythene 60 ml , chloroform bladder 500 ml , dropper sterile capacity 3ml , dropping bottle , latex bladder enkay no,5 with clip , measuring cylinder , wash bottle ldpe plastic , , , circular capsules fused silica without lid 48 x 15 (20 ml) , dishes culture petri , crucible fused silica for vm + lid 25x22x38 mm , beaker grifin, low form, with spout, graduated , burette - boroflo, screw thread with ptfe key , funnel plain 60° angle long stem glass 100 mm diameter , funnel separating pear shape with hollow plug stop cock, hollow interchangeable stopper, 500ml , measuring cylinder-single matric scale with pour out , pipette measuring (mohr type) accuracy as per class -a , volumetric flask with stopper , 50 ml burette with 1 ltr. reservoir , automatic zero burette accuracy as per class a with certificate , bod bottles with i/c stopper (300 ml) , bottles reagent amber with i/c stopper , bottles reagent plain narrow mouth with flat head i/c stopper , conical flask , flask boiling round bottom , gas burette with jacket cap. 100 ml (graduated burette 0-5 ml least count 0.1 ml for orset appratus) , orsat gas analyser (for analysis of flue gases) for determination of co2 o2 and estimation of co in flue gases complete with rubber tubing connector. 50 ml burrete and other accessories equipment shall be complete polished wooden cabinet equipment should be made of heavy walled borosilicate glass tube and stop cock , spares parts for orsat apparatus , tissue paper roll (double ply) (whatman) filter paper, circular catno. , cellulose nitrate filter 0,45 micron , , acid proof suit , , coal sample tray 12"x 14" big , , spatula (one end spoon and one end flat) 200 mm , , safety goggles (plain) , , direct reading % thermometer for caustic soda lye (45% to 50%) w/w with temperature correction , bottle relative density with capillary bore interchangeable tefflon stopper, 25ml , chlorine gas toner spanner , direct reading % thermometer for hydrochloric acid (27% to 32%) w/w with temperature correction , direct reading % thermometer for sulphuric acid (95% to 99%) w/w with temperature correction , heating element for muffle furnace (1200 degree c , kanthal a-1 resisative wire) , lab apron coat, free size , relay for muffle furnance , spare parts for muffle furnace (make jd refractories) m degree , test sieve for coal analysis, brass frame s.s./wire mesh (make-jayant) , test sieve sets for coal mill fines will be brass, 200mm dia 50mm height, wire cloth from one piece without seam (set shall be consist of three sieve lid & receiver) 50, 100 and 200 astm mesh (make-jayant) , thermal fuse , thermocouple cr/al for muffle furnace , water bath rectangular (double wall), ambient to temp. 95°c, +/-1°c, 220/230v ac, 12 holes 75mm dia (size 425*325*100mm) , water safety jacket(medium size) , temperature controller (pid with sgr power controller) , , working chamber of muffle furnance 6x6x12 inch , , laboratory hand gloves , , laboratory hand gloves (rubber acid and alkali proof) medium size , , laboratory hand gloves nitrile , , polythene sampling bags , , polythene sampling bags (size-1 kg) with zip , , polythene sampling bags (size-500 gm) with zip , , polythene sampling bags (size-250 gm) with zip , , crucible tong , , crucible tong 12" inch , , crucible tong 24" inch , , gooch crucible g4 (size-30 ml) , , vm

CTN :45727339

02 Jul, 2026 NA

Belgaum - Karnataka

Tender For supply of plain copier paper (v3) isi marked to is 14490 (q4) , household laundry detergent powders (v2) conforming to is 4955 (q4) , staple pins/staples(v3) (q4) , tags for files (v3) conforming to is 8499 (q4) , poker or awl as per is 10375 (q4) , toilet soap, liquid (v3) conforming to is 4199 (q4) , wireless attendant calling system (q4) , electronic calculator (v2) (q4) , stationery scissors (v2) conforming to is 989 (q4) , pads for rubber stamps (v2) conforming to is 4747 (q4) , paper clips (v2) conforming to is 5650 (q4) , air freshener liquid (v3) (q4) , dak pad (v3) (q4) , stationery holder/pen stand(v3) (q4) , paper weights (v2) (q4) , eraser (v2) (q4) , glue stick (v3) (q4) , compact disk cases - cd - dvd case (q4) , double sided tape (q4)

CTN :45722473

09 Jul, 2026 80.0 Thousand

Bangalore - Karnataka

Tender For supply of paper weights (v2),stationery holder/pen stand(v3),paper punch machine(v2),file/folder (v3),photography paper conforming to is 6139,compact disk cases - cd - dvd case,paper punch machine(v2),stationery scissors (v2) conforming to is 989

Polythene Cap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Corporations / Associations / Others