Latest polythene hose Tenders | Government polythene hose Tenders

CTN :41362120

18 Aug, 2025 NA

Bikaner - Rajasthan

Tender For supply of reverse light switch , ac hose , cabin roof marking light , brake pad kit , brake radiation hose , pneumatic valve , clutch master cyl , clutch plate and pressure , clutch pipe , radiator assy , recd valve , system protection valve

Central Government/Public Sector

CTN :41352422

28 Aug, 2025 NA

Yamunanagar - Haryana

Tender For supply of polyurethane flexible pneumatic coiled spiral hose pipe with quick coupler connector socket f itting set (superior quality) size of pipe-i. d-8mm, o.d.-12mm length of pipe =10 metre . [ warranty peri od: 30 months after the date of delivery ]

CTN :40557164

07 Aug, 2025 NA

Hyderabad-T - Telangana

Tender For bid to ras supply of upgradation of vartm plc software , planetary geared motor 0point5 hp 300 rpm flange mounted , manifolds for resin distribution , resin inlet pipe thermal insulation s2 glass tape , thermal insulation jacket for resin tank , electrical switches , hose pipes steel braided p 40 bar , ball valves 1 inche , jubly clips , injection ports , dummies , extension boards , pressure gauges 0 to 50 bar , vacuum gauges , solenoid valve with metal fitting pneumatic 0 to 50 bar , solenoid valve with metal fitting liquid 1point8 to 50 bar , oil filters , smps , solenoid coil , limit switches , isolation valves

Central Government/Public Sector

CTN :41324092

10 Sep, 2025 NA

Multi City - Multi State

Tender For supply of nitrile butadiene synthetic rubber hose pipe as per specification of hose : is: 9573-2 012 type-2, inner dia of hose: 7.9mm (5/16 inch), outer dia of hose: 15.0 mm (5/8 inch), inner tube: black in colour nitrile butadiene synthetic rubber reisstance to liquefied petroleum gas, reinfor cement: reinforced with single layer of hose reinforcement wire, outer cover: orange in colour synt hetic rubber resistance to abrasion, weather & liquefied petroleum, outer finish: cloth marked wrapp ed finish, length: 20 meter each piece (approx) , minimum bend radius: 95 mm, low temperatur e: suitable for 40 degree c +/- 2 degree c, ozone resistance: 50ppm at 40 degree c +/- 2 degree c, hydraulic test(a) work pressure 1.0 mpa(10.0kg/cm squre (b) test pressure 2.0mpa (20.0 kg/cm sq ure) (c) burst pressure 5.0 mpa (50.0 kg/cm squre ), pneumatic test: tested at 0.07 mpa for one min ute under water, pin princking: pin prinked for the gaseous application. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :41323721

19 Aug, 2025 NA

Medchal-T - Telangana

Tender For supply of heavy duty pneumatic hose pipe , pvc core double braided with synthetic fiber, covered wit h thermo compound of black color, length 20 mtrs, dia-12.7mm, pressure-17.85kg/cm2 and both ends fitte d with threaded 0.5 [ warranty period: 30 months after the date of delivery ]

State Government

CTN :41276704

25 Aug, 2025 5.42 Lacs

Birsinghpur - Madhya Pradesh

Tender For procurement of various spares of hydrogen plant of sgtps, mppgcl, birsinghpur. - particulars as per tender schedule, needle valve for cooling condenser drain line i) one end match from 10 mm ss line ii) other end is size (tag no. 12b1, b2)moc ss 316, fitting of copper tube for filling h2 gas from manifold to h2 cylinder suitable for 150 kg pressure (pegtail), suction hose for h2 compressor as per enclosed drawing, needle valve at gas filling line a&b steam for 10 mm ss tube line before xa, xf, xa filter.make global, mo cbl no. gv54.pnv, 10 m-s6l-p-t-sf, batch no. 404boae heat no. 1163, 6000/psi, moc ss 316, filter body drain valve (airmatic hp filter 350 kg/cm2) size bv bsp-f, water control valve make-aira/asco, dia port bsp-3/4 ,dia orifice -20mm, max working pressure -16 bar,dimensions as per drg ,a=170mm, b=44mm,c=100 mm, function normally closed ,material valve body bronze, pn -16,disk-brass ptfe insert bsp pilot port rod ss 304 ,pilot pneumatic specification-fluid water, temp fluid +5 c to 180 c,ambient +5 c to 60 c (complies with electrical standards nfc 79300), pressure regulator for hydrogen manifold make esab, diaphragms for pneumatic control valve 2 (50 mm) (neoprene rubber) valve make crescent sl no cpl/2 body material cs, diaphragms for pneumatic control valve 3 (75 mm) (neoprene rubber) valve make crescent sl no cpl/2 body material cs, high pressure hose pipe along with connectors at both end size length 1 mtr ( max working pressure -16 bar), ss tube (10 mm od,5 mm id), male connector 10mm od x10mm npt moc ss316, equal union 10mmx10mm od moc ss316, equal tee 10mmx10mmx10mm od moc ss316, nipple 10mmx1 moc ss316, reducer 1/2 x1/4 moc ss316, elbow 90 size 10mmmoc ss316, nut size 10 mmmoc ss316, ferrule in 2 piece10 mm moc ss 316, .

CTN :41273066

11 Aug, 2025 5.00 Lacs

Rajauri - Jammu And Kashmir

Tender For supply of fuel tank assy , injector nozzle , lever assy parking brake , hose pipe , valve brake pneumatic , self starter housing , alternator regulator , sparks plug , battery cut off switch , gear box lock kit , kit pad rear assy , fuel filter 2 pin , fuel filter 3 pin , bendix drive assy , solenoid switch , pinion drive assy , valve exhaust standard , head gasket , oil seal , rocker arms , gasket exhaust , push rod , fan belt , head gasket assy

Central Government/Public Sector

CTN :41238291

06 Aug, 2025 NA

Chennai - Tamil Nadu

Tender For supply of hose pipe pneumatic size 1/2 inch sae100r2x0.8 meter long with both end fsh 1/2 ' d' type for parking on body. as per drg no ngp-trs-3-13.227 rev-2 or latest sr no -4 [ warrant y period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :41227378

06 Aug, 2025 30.89 Lacs

Begusarai - Bihar

Tender For supply of solenoid valve 24 v 0.25 inch,eandhaust for pneumatic cylinder 0.25 inch,wl sensor,wt sensor,drag chain,3 by 2 deadman switch 0.25 inch roller type,push button switch,push button cap,hot air sealing machine hasu sealing gun teflon inside,hot air sealing machine supply ofguide rod with plate hasu,hot air sealing machine heater rod for hasu,hot air sealing machine teflon hose for hasu 1 mtr.,hot air sealing machine teflon hose for hasu 2 mtr.,portable hot air sealing machine portable gun hasu,hose pipe lpg hose 0.5inch length 500mm with fitting,hose pipe lpg hose 0.5inch length 700mm with fitting,hose pipe lpg hose 0.5inch length 1000mm with elbow,hose pipe lpg hose 0.5inch length 1100mm with fitting,hose pipe lpg hose 0.5inch length 1500mm with fitting,hose pipe lpg hose 0.5inch length 2000mm with fitting,hose pipe lpg hose 0.5inch length 2500mm with fitting,hose pipe lpg hose 1inch length 1000mm with fitting,pressure gauge pressure gauge 0 10 kg per cm2, glicerien filled,pressure gauge pressure gauge 0 28 kg

Central Government/Public Sector

CTN :40937110

07 Aug, 2025 NA

Mandal - Gujarat

Tender For corrigendum : supply of h.b.f spares> - wear belt (56850 x 50 x 6mm thk), scrapper blades 4.2mtrs hbf, curb of 125mm height (each meter), 4 numbers of end slides, buta seal (1mm thk x 29000mm), teflon strips (4200mm lg) (uhmwpe), spray nozzles (each), belt guide rollers, cloth trackig air bellows (1 set = 2 nos), plummer blocks for 110 sq.mm "uhmwpe"-1210ek with out bearing, plummer blocks "uhmwpe"-1209ek with out bearing, vacuum box lifting cylinder assembly, 4 nos ss304 clamps, air duct sleeve, 400 nb belt return rollers "msrl", feed dam roller msrl, 100 nb cloth return rollers, 150 nb cloth return rollers, cloth tension assembly, pneumatic panel, filtration hose along with 100mm x 2900mm length with 4nos ss304 clamps, filtration hose along with 100mm x 3000mm length with 4nos ss304 clamps, one set of seal strips s for 110 m2 hbf (one set consists of 18 pieces for the vaccum box, 1 piece at head end, 1 piece tai end, 4 pieces half moon at ends), slurry feeder hose for nuetral hbf flexible hose -274m id x 1850mm long with hose clamps to suite 250b pipe., slurry feeder hose for nuetral hbf flexible hose -169m id x 1800mm long with hose clamps to suite 150b pipe., bowed roller for horizontal belt filter of diameter 150mm (moc of shaft : ss316), axle diameter : 75mm.roller face : 4450mm, height of bow : 74mm, wear belt(56850 x 50 x9 mm thk), vacuum box (moc :ss304), vacuum box lifting leaver assembly(moc :ss304), spares of 5 m2 horizontal vaccum belt filter (model: 12b/02-30v product filter), cloth tensioner assembly, belt return rollers 250 nb, feed dam rollers 285 nb, cloth roller 75 dia, cloth tension roller 75 dia, cloth tracking roller 75 dia, belt guide roller m.k a ss304/hdpe, belt guide roller m.k b ss304/hdpe, belt guide roller m.k c ss304/hdpe, seal water assy-ss304, spray pipe assembly, spray sheet pvc, cloth tracking unit-ss304/nr bellows, pneumatic pannel/cloth sensor assy, spray pipe manifold, slurry feeder assy, curb 75mtrs ht (each meter), wear belts endless (6thk x 35 width, 12875 length), plummer blocks "uhmwpe"-1207ek with out bearing, cloth scrapper, plummer blocks 30 dia for scrapper "uhmwpe" with out bearing, feed dam roller bearing blocks with out bearing, filtrate hoses along with hose id 75 x 1750mm long with 4 nos of ss316 clamps, seal strip sets consistes of 4 nos of seal strip, 1 no. head end pad, 1 no. tail end pad, and 4 nos of end slides

Polythene Hose Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

State Government

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector