Latest polythylene tube Tenders | Government polythylene tube Tenders

Central Government And Public Sector

CTN :45557805

30 Jun, 2026 NA

Rajkot - Gujarat

Tender For supply of dome cameras , nvrs , 8 port lan connection poe switch , 16 port poe switch , 24 port poe switch , rj- 45 cat 6 lan cable , 8 tb hdd , duct pipe-pvc pipe for rj-45 cat 6 cable including labour

Corporations And Associations And Others

CTN :45523190

19 Jun, 2026 4.76 Lacs

Delhi - Delhi

Tender For provision of new led street lights with allied accessories on existing poles at various dark spots in saidulajab ward no 160 under south zone - led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy >135 lm/watt). supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, frequency 50/60 hz, operating temp range -5 0c to 50 0c, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%,thd 10% as per iec 61000-3-2, p. f. 0.95, ip-66,ik-10, cri >70, under voltage and over voltage protection, emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitary) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation color matching)5, maximum power consumption should not more than the specified rating and fixture shallbe of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductorsingle core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 testreport and all testing required for led fixturesas per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge asper requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). 45 watt , supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm

Corporations And Associations And Others

CTN :45523194

19 Jun, 2026 4.67 Lacs

Delhi - Delhi

Tender For provision of led light fittings with accessories at various locations in ward no. 167 khanpur, under south zone. - supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm, led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy 135 lm/watt) supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -5 deg centigrade to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-45, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip66,ik-10, cri 70 , under voltage and over voltage protection,emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c). 45 watt

CTN :45297565

22 Jun, 2026 NA

Surat - Gujarat

Tender For corrigendum : supply of cable trunking and wiring duct system for electrical installations marked to is 14927 (part 2) (q2) , ceiling rose - is 371 (q3) , elecric bells and accessories as per is 2268 (q3) , modular electrical enclosure switch board boxes for modular type accessories (q3) , pvc gitti (q3) , non modular piano type domestic fan regulator conforming to is 11037 (q3) , electrical connection lugs or thimbles (q3) , ferrule - is 10942 (q3) , emergency push button switch (q3) , electrical sleeves conforming to is 11654 (part 3/sec 403) (q4) , electrical junction box for lighting (q3) , hard wood as per is 1331 (q3) , ht tape (q3) , emery cloth (q3)

CTN :45552227

22 Jun, 2026 5.00 Lacs

Tonk - Rajasthan

Tender For laying pvc xlpe insulated &ampamp pvc sheathed un armored aluminum cable in existing rcc hume stoneware pvc pipe open duct cable trench cable tray with cable tie including testing etc as required of following size installing various places

CTN :45550337

02 Jul, 2026 NA

Adra - West Bengal

Tender For supply of portable smoke exhauster cum blower (petrol engine driven) make: integral instavent 16 / equivalent fan size: 16 inch engine type: 4-stroke air-cooled petrol engine starting: battery-operated self-start flexible duct: 7.5 m (pvc reinforced), 16-inch diameter performance:positive ventilation flow: 11,700 cfm negative suction flow: 4,389 cfm fan speed: 3500 rpm fuel capacity: minimum 90 minutes continuous run [ warranty period: 30 months after the date of delivery ] ]

CTN :45512468

02 Jul, 2026 NA

Pune - Maharashtra

Tender For air cooled ducted 16.5 tr ac unit , air cooled ducted 5 tr ac unit , unloading lifting and shifting of 16.5 tr ducted package ac unit at site , unloading lifting and shifting of 5 tr ducted package ac unit at site , installation n2 pressure testing vacummising and commissioning of 16.5 tr ac , installation n2 pressure testing vacummising and commissioning of 5 tr ac , supply and charging of r 410 gas , supply and inst of floor mounted ms stand fabricated out of ms channel , supply and inst of floor mounted ms stand fabricated out of ms angel , hard copper refrigerant piping between indoor and outdoor units , supply and installation of gss ducting as 24g , supply and installation of gss ducting as 22g , acoustic insulation of plenum initial ducting with 10mm thick armasound , supply and fixing of 13mm thick nitrile rubber al foil faced insulation class i , supply and installation of ai powered jet nozzles with volume control damper , supply and inst of ai powered return air grills without volume control dampers , supply and installation of gi opposed blade duct dampers, qty 1.5 sqmtr , supply and fixing of canvas connection , supply and laying of 32mm dia pvc drain piping , electrical cabling 6 c x 1.5 sqmm cu flexible , electrical cabling 3 c x 1.5 sqmm cu flexible , electrical cabling 1 sqmm cu flexible double earthing * /bid number : gem/2026/b/7581741 + /dated: 11-06-2026 ' ' / bid document 1 / 24

corporations/Associations/Others

CTN :45492328

24 Jun, 2026 30.85 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of , taflon gland rope seal oil valve size 4x4 sqmm , taflon gland rope seal oil valve size 6x6 sqmm , taflon gland rope seal oil valve size 8x8 sqmm , taflon gland rope seal oil valve size 10x10 sqmm , m s coupling bolt for dc seal of oil pump full thread , galvanized ht nut bolt with 2 nut 2 flat washer 1spring washer 12x75 mm pitch 1point 5 mm full thread , nipple for h2 gas filling regulator 36x34mm brass make , o ring of size od 50mm id 44mm thick 3mm , o ring of size od 52mm id 44mm thick 4mm , o ring of size od 55mm id 45mm thick 5mm , o ring of size od 60mm id 54mm thick 3mm , copper pipe id 5mm od 8mm length 2mtr , copper washer id 8mm od 14 mm thickness 2mm , industrial h2 gas filling pipe reinforced by wire mesh id 10mm od 16mm , oil gauge glass set with fitting for hydraulic tank , industrial grade h2 gas filling regulator for a generator of a 200mw unit inlet pressure 125 150kg cm2 outlet pressure 3 4kg cm2 safety and testing as per peso guidelines , perplex container for 15 75 kv bus duct complete set , portable hydrogen gas leak detector , brass make hexagonal nut for h2 filing post valve , caf jointing sheet 59 oil 1 0 mm 1x2 meter , ms coupling bolt for ac seal of oil pump full thread , dc seal oil pump rpm 2900 head 120m complete mechanical seal set single inside , ac seal oil pump rpm 2900 head 120m complete mechanical seal set single inside , 1cx2 5 sq mm 1 1kv grade single core cu conductor pvc bundle of 90m red yellow blue insulated wire as per is 694 make havells , ss 304 bolt with 2 nuts 2 flat washers 1spring washer 12 5x70 half thread , handheld insulation tester megger 1kv type rechargeable make megger , digital multimeter , roller bearing no 306 , caf jointing sheet 59 oil 2 0 mm 1x2 mete , caf jointing sheet 59 oil 3 0 mm 1x2meter , caf jointing sheet style 54 n m 0 5mm 1x2 meter , caf jointing sheet style 54 n m 1 5mm 1x2 meter , brass bolt with fixed washer and 1 flat washer for slip ring carbon brush size 6x12mm , brass make extension nipple for h2 post valve , brass make hexagonal nut 2 flat washers and 1 spring washer for the co2 filling post valve , brass nut bolt and 1 no fixed and 1 no flat washer for slip ring 8x35mm , brass plug for h2 gas cooler , brass plug for seal oil cooler , brass strip for slip ring carbon brush holder 17x47x1 soft metal as per sample , insulating flat washer made of glass textolite 5mm thick id 10mm od 26mm , insulating flat washer made of glass textolite 5mm thick id 12mm od 28mm , insulating flat washer made of glass textolite 5mm thick id 18mm od 40mm , insulating flat washer made of glass textolite 5mm thick id 22mm od 44mm , insulating flat washer made of glass textolite 5mm thick id 24mm od 48mm , insulating flat washer made of glass textolite 5mm thick id 26mm od 50mm , insulating flate washer made of glass textolite 5mm thick id 28mm od 52mm , insulating fiber sleeve having dimension id 10mm od 13mm length 2mtr , insulating fiber sleeve having dimension id 12mm od 16mm length 2mtr , insulating fiber sleeve having dimension id 16mm od 20mm length 2mtr , insulating fiber sleeve having dimension id 20mm od 25mm length 2mtr , insulating fiber sleeve having dimension id 8mm od 11mm length 5 mtr complete pipe without a cut , insulating fiber glass sheet size 1x2 mtr and thickness 5mm , ss bolt 12 5x80mm half thread thread and micro pitch with following size 12 5x80 mm , ss bolt with 2 nut 2 flat washer 1spring washer having micro thread and micro pitch with following size 12x80 mm , ss bolt with nut and 2 no flat washer and 1 no spring washer having micro thread and micro pitch with //bid details 2 / 93 following size 36x70 mm , bimetallic strip 100x50 mm , gun metal make carbon brush holder for generator , pvc hose pipe 1 point 25inch , hydraulic tank looking glass looking glass transparent toughened heat resistant up to 300 deg c glass thickness 14mm moc toughened glass with sealing , damper tank looking glass looking glass transparent toughened heat re

CTN :45505916

01 Jul, 2026 NA

Bardhaman - West Bengal

Tender For supply of 14 inch cutting saw blade rotary , canvas fire fighting hose size 3 inch , pvc heavy duty suction discharge helical water hose , coupler type hydraulic connection , chaser die head complete for m 20 chaser machine , synthetic grey paint 4 liter pack , turpentine oil , canvas air duct 24 dia , g i wire netting mesh , sensitive earth leakage relay , unslacked lime packed in 40 kg hdpe bag

State Government

CTN :45431330

15 Jun, 2026 37.61 Lacs

Jodhpur - Rajasthan

Tender For supply and installation or urs at various areas of zone south, jodhpur - providing & laying xlpe insulated & p.v.c. sheathed armoured aluminium cable confirming to is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, round / flat strip armouring of cables, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray(with cable tie) including testing commissioning etc. as required of following size.10.0 sq. mm x 4 core, supply & installation of unified regulation system (urs) for existing street light that meets the following specification.the system must feature a 240mhz dual core processor with gsm/gprs communication capabilities and support for ota firmware updates.it should come with an internal class 1.0 energy metering system that can provide real time data of crucial electric load parameters along with fault and theft alerts.the urs must include remote load scheduling and control functionalities with a feedback time of less than seconds.the enclosure confirms to ip55 standards,and be fire retardant,weatherproof,and rustproof. the system should use a lightweight protocol for secure ,real-time communication and include cloud based software for comprehensive device management and remote control. it should be able to control single phase 5.5kw and 3 phase street light load upto 8.5kw and should come with 2pole/4pole mcb upto 25a/40a at output for short circuit protection .having a 2-year warranty urs will be installed at site as per direction of engineering incharge. (size 570*520*190mm)

Polythylene Tube Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Corporations And Associations And Others

Corporations And Associations And Others

corporations/Associations/Others

State Government