Latest porcelain bush Tenders | Government porcelain bush Tenders

Central Government/Public Sector

CTN :45547873

25 Jun, 2026 NA

Mysore - Karnataka

Tender For supply of isolating bush for wheel set earthing equipment as per rcf drg no lw71244 material & specification: ep 4030 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45546395

19 Jun, 2026 NA

Harnaut - Bihar

Tender For supply of maintenance kit - 03 for earthing equipment. the kit consists of 6 items. special repair no.,description, rcf drg.no., qty/set is as under: a. s s bush lw71235 alt a , qty: 2per set. b. brush holder lw71238 alt nil qty:1per set. c. carbon brush. assly rcf drg no. lw71239 alt nil,qty:2 per set. d. clip assly lw71240 alt nil,qty:2 per set e. isolating bush lw71244 alt a; qty:2per set f. bracket lw71247 alt nil ; qty:1per set. spec: rcf spec edts 101 rev c amed.1 with all corrigendums including latest corrigendum-6. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

corporations/Associations/Others

CTN :45347213

15 Jun, 2026 NA

Anpara - Uttar Pradesh

Tender For corrigendum : tender for supply of o ring for pr.spring of size 73x63x6 (as per sample), o ring oil seal viton var-05 (as per sample), oil seal of size 63x42x9 for rc feeder, pa fan grommet rubber 10mm thick for oil (as per sample), oil seal 60x80x10 mm (as per sample), oil seal 42x25x7 mm for fd fan lop of 210 mw., oil seal 42x62x8 mm for rc feeder gear box assy. of 210 mw., victaulic coupling gasket (18 inch), material- silicon rubber (as per sample), victaulic coupling gasket (16 inch), material-silicon rubber (as per sample), victaulic coupling gasket (20 inch), material- silicon rubber (as per sample), rubber bush for coupling bolt for pa fan (as per drawing/sample), rubber bush for coupling bolt for id fan (as per sample), gate valve-50nb, gate valve -15nb, 25 nb isolating gate valve, viton rubber oil seal 43.85x64.35x12.6 mm, viton rubber oil seal 28.47 x 74.78 mm, o ring s.g. 90033013 as per sample, rc70-c cork sheet 1000x1000x 3mm, specification-rubber cork sheet for transformers, size-1000x1000x 3mm, grade-rc70-a type-c (very good oil resistant), as per is 4253(part 2):2008, silica gel blue (4mm to 6mm), bolt 36x140 part, 01074301000c/024, specification:, hex bolt m16x80 with nut and washer, hthh bolt with nut & washer m8x70, h.t hex bolt m 5/8x55mm with nut washer, hex ht bolt 6x30 with nut and washer, hex_ht_bolt 16 * 136' with nut and washer, hex_ht_bolt 20 * 135' with nut and washer, hex ht bolt 24 * 145 with nut and washer, hex_ht stud 12x66 with nut and washer, ss hex bolt & nut m - 12 * 70, ss shim type ss316, thickness 0.50mm, ss shim type ss316, thickness 1mm, ss shim type ss316, thickness 2mm, ss shim type ss316, thickness 0.05mm, ss shim type ss316, thickness 0.10mm, ss shim type ss316, thickness 0.30mm, coolant radiator for dozer, ( electrolyte specific gravity 1250 ( exidemake), skf make v belt a-72, skf make v belt a-75, skf make v belt a-59, dol starter 5.5 kw,415 v 3p rr 13-22 amp, spidex l-095 as per sample

CTN :45491436

22 Jun, 2026 2.00 Lacs

Surat - Gujarat

Tender For tender of material requirement (ht porcelain bushing) for dgvcl in house transformer repairing unit under bardoli division.

CTN :45112925

11 Jun, 2026 NA

Shimla - Himachal Pradesh

Tender For bid to ras tender for supply of disconnecting ht and lt supply taking down the defective transformer indoor outdoor type from four pole two pole structure or lifting from the outdoor type foundation or taking out from sub station bldg using a crane of suitable capacity and slings ropes etc as required and shifting the same to civil workshop for repairs complete all as directed for transformer capacity 400 kva , shifting back the repaired transformer indoor outdoor type from civil workshop to site reinstalling at original position and fixing properly on four pole two pole structure or outdoor type foundation or inside a sub station bldg using a crane of suitable capacity and slings ropes etc as required making ht lt side connections and testing for satisfactorily working complete all as directed for transformer of capacity 400 kva , draining out transformer oil from the transformer and storing the same in suitable containers to be arranged by contractor without any extra cost opening the top cover and lifting up the core assembly carefully to check the condition of transformer windings and core retanking the same after repairing checking of leakage from transformer body and repairing welding works required for making transformer body leak proof refilling the transformer oil dully dehydrated and filtered dehydration and filteration to be paid separately and making all connections with ht lt side bushings refixing the top cover and testing the transformer with a suitable capacity insulation tester complete all as directed for transformer of cap 400 kva , m and l for rewinding of burnt out defective ht copper coils with new super enamelled heavy duty copper winding wires of size matching to the existing one including varnishing drying in a suitable oven and all insulating material such as cotton sleeves tapes etc and connections with bushing terminals complete all as specified and directed , all as per item no 4 above but lt copper coils complete all as specified and directed , m and l for painting the transformer tank from inside with two coats of zinc chromite after preparing the tank walls bottom top cover inner side by properly cleaning the surfaces oil free complete all as directed for transformer capacity 400 kva , m and l for replacement of defective ht porcelain bushing of suitable size for transformer of cap 400 kva including washers of good quality complete all as specified and directed , m and l for replacement of defective lt porcelain bushing of suitable size for transformer of cap 400 kva including washers of good quality complete all as specified and directed , dehydration and filteration of transformer oil for indoor outdoor type transformers of any capacity at site using transformer oil filteration plant to improve di electric strength not less than 45 kv at 2 point 5 mm electrode gap complete all as directed note unit rate quoted shall be deemed to include the charges for hiring of oil filteration plant shifting to different locations at cantt area testing of samples of oil as per requirement and nothing extra will be paid on this account , s and f new transformer oil for replacement or topping up the level of oil having dielectric strength not less than 45 complete all as specified and directed

Central Government/Public Sector

CTN :45470707

09 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of maintenance kit-03 for earthing equipment consists of 06 items. (1) ss bush to rcf drg. no. lw 71235, alt-a, qty./kit- 2 nos. (2) brush holder to rcf drg. no. lw 71238, alt-nil, qty./kit- 1 nos. (3) carbon brush assly. to rcf drg. no. lw 71239, alt-nil, qty./kit- 2 nos. (4) clip assly. to rcf drg. no. lw 71240, alt-a, qty./kit- 2 nos. (5) isolating bush to rcf drg.no. lw 71244, alt-a, qty./kit- 2 nos. (6) bracket to rcf drg. no. lw 71247, alt-nil, qty./kit- 1 nos. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

corporations/Associations/Others

CTN :45250962

16 Jun, 2026 40.57 Lacs

Varanasi - Uttar Pradesh

Tender For corrigendum : supply of ht porcelain bushing , lt porcelain bushing (25 to 100 kva) , lt procelain bushing (250 kva to 400 kva) , lt porcelain bushing (630 kva)

Central Government/Public Sector

CTN :45488088

16 Jun, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - disposal of ferrous scrap released material such as: (1) brake beam icf, qty=01 no.=25 kg. (2) c.i. valve, qty=07 nos.=4.2 kg. (3) dashpot spring 16 ton, qty=07 nos.=161 kg. (4) feed pipe, qty=36 nos.=36 kg. (5) brake pipe, qty=40 nos.=40 kg. (6) passenger emergency alarm device, qty=01 no.=01 kg. (7) angle cock, qty=29 nos.=43.5 kg. (8) g.m wheel valve 40 mm, qty=19 nos.=15.2 kg. (9) flushing valve, qty=12 nos.=9.6 kg. (10) gravity cock, qty=728 nos.=36.4 kg. (11) shock absorber, qty=02=14 kg. (12) drain cock, qty=18 nos.=10.8 kg. (13) isolating cock, qty=01 no.=0.8 kg. (14) g.i. pad lock off size, qty=31 nos.=15.5 kg. (15) fire extinguisher, qty=74 nos.=133.2 kg. (16) pressure gauge of size, qty=15 nos.=1.5 kg. (17) distributor valve for icf, qty=01 no.=25 kg. (18) door closer, qty=25 nos.=20 kg. (19) swinging nut, qty=51 nos.=51 kg. (20) swinging link pin, qty=69 nos.=172.5 kg. (21) flex ball cable, qty=05 nos.=10 kg. (22) step complete mounting (foot step), qty=05 nos.=80 kg. (23) rotary lock lift, qty=02 nos.=4 kg. (24) installation lever, qty=32 nos.=9.6 kg. (25) control arm top with bush, qty=02 nos.=116 kg. (26) primary bump stop, qty=29nos.=1.45 kg. (27) lavelling valve, qty=05 nos.=5 kg. (28) dump valve, qty=08 nos.=6.4 kg. (29) axle end cover, qty=17 nos.=34 kg. (30) centering disc lower & upper, qty=08 nos.=08 kg. (31) modified cbc restrictor, qty=02 nos.=10 kg. (32) empty iron drum capacity 210 ltrs, qty=20 nos.=320 kg. (33) empty iron drum capacity 20 ltrs, qty=120 nos.=120 kg. (34) axle box pivot bush, qty=03 nos.=45 kg. (35) nut & bolt etc, qty=700 kg. having local lot no. dhn/2026/86. location:- blacksmith room near c&w/store/dhn.

corporations/Associations/Others

CTN :45468451

23 Jun, 2026 1.21 Lacs

Meerut - Uttar Pradesh

Tender For supply of lt porcelain bushing for 250kva to 400kva distribution transformer , lt porcelain bushing for 630kva distribution transformer , lt porcelain bushing for 1000kva distribution transformer

corporations/Associations/Others

CTN :45468455

23 Jun, 2026 3.28 Lacs

Meerut - Uttar Pradesh

Tender For supply of lt porcelain bushing for 25kva to 100kva distribution transformers

Porcelain Bush Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors