Web Analytics Made Easy - StatCounter

Porcelain Mortar Tenders

Get complete information related to latest Porcelain Mortar Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Porcelain Mortar Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Porcelain Mortar Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :45338405 Due date: 10 Jun, 202610 Jun, 2026 50.00 Lacs
Tender For 02/2026-27/gram panchayat eta me meterial supply-construction materials (such as brick, cement, gravel, sand, interlocking, grit, gravel, rebar, paint, iron equipment and all others mentioned in g-schedule) for ramrat works conducted under mahatma gandhi nrega yojana yojana (mnrega

State Government

CTN :45325008 Due date: 02 Jun, 202602 Jun, 2026 NA
Tender For material supply works of mgnrega under santipur development block - coarse sand(grading zone ii as per is 383-1970) stacked at site , medium sand(grading zone ii as per is 383-1970) stacked at site, , fine sand(grading zone ii as per is 383-1970) stacked at site, , silver sand- stacked at site, , cement(ppc/psc/opc) 33 grade, , cement(ppc/psc/opc) 43 grade, , cement(ppc/psc/opc) 53 grade, , steel material- tor steel rods/hysd bars/tmt, , bars(sail/tata/rinl) (fe415/fe500/fe500d, conforms to is 1786), , steel material- tor steel rods/hysd bars/tmt, , bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro, , steel) (fe415/fe500/fe500d, conforms to is 1786), , stone graded aggregates 10mm nominal size, , stone graded aggregates 20mm nominal size, , stone graded aggregates 40mm nominal size, , (a) first class bricks(kiln burnt) sorted and stacked at site, , (a) second class bricks (kiln burnt) sorted and stacked at site, , (c)first class picked jhama bricks sorted and stacked at site, , (e) jhama metal (kiln burnt) sorted and stacked at site, , (f) brick bats sorted and stacked at site, , (g) brick aggregates (40mm down) sorted and stacked at site, , hire charges of concrete mixer 0.25 to 0.40 cum with hopper, , vibrator(needle type 40mm), , plate vibrator, , hire charges of 5 kva genarator, , hire charges of 3 kva genarator, , hire charges of monkey set, , hire charges of diesel road roller- 8-10 tonne, , empty gunny bag, , nail, , salt bullah (7.5-10cm dia), , eucalyptus bullah (7.5-10cmdia), , thermocol 12.5mm thick., , polythene sheet(150gm per sqm), , gi wire, , coconut rope, , lime dust, , farm yard manure/cowdung(@max 20% moisture content), , vermi compost, , neem khol or other oil seed cake, , carbofuran-3g, , g-9/banana sapling tissue culture, , nylon net, , poly rope, , bamboo, , 2:1:1 npk based organic manure, , 5:1:1 npk based organic manure, , jharii/rose can, , bio fungicides, , imida-chlorpide 17.8% sl, , chloropyriphos 50% ec, , zinc phosphide, , carbendazim 50 wp fungicides i.e bavistin, , spraying machine (hire) per day, , curing compound, , good earth, , polithin tube(25 cm*10cm), , insecticide, , hire charge of 25 mm thk. shuttering timber wood, , n.r.k. (10:26:26), , n.r.k. (19:19:19), , n.r.k. (20:20:20), , unslaked lime, , glue, , wire mesh, , hire charge of electric welding machine, , galvanised steel corrugated sheet, , galvanised steel boits & nuts 6mm dia & 250 mm long round, , head with slots, , galvanised steel j or l hook 8 mm dia, , g.i. limpet washer, , bitumen washer, , galvanised steel plain sheet, , paddy straw, , mild steel tubes hot finished seamless type, , poly rope, , mango seedling, , nursary water cane, , insecticide, , akash moni seed, , neem seed, , segun seed, , mehoguni seed, , gamar seed, , garden seed, , krishnachura seed, , radhachura seed, , babla seed, , areca saplings, , coconut saplings, , mango bid, , coconut rope, , hire charge of bamboo for shuttering, , water proofing compound, , m.s. integrated steel for steel window and ventilator, , m.s.or w.i. ornamental grill for door and window, , chromium plated brass handles 100 mm with plate 175x32 mm, , bright finished or black enamelled mild steel butt hinges 75x47x1.70 mm., , bright finished or black enamelled mild steel butt hinges 50x37x1.50 mm., , bright finished or black enamelled mild steel scrwes 50 mm., , bright finished or black enamelled mild steel scrwes 40 mm., , bright finished or black enamelled mild steel scrwes 30 mm., , bright finished or black enamelled mild steel scrwes 25 mm., , bright finished or black enamelled mild steel scrwes 20 mm., , bright finished or black enamelled mild steel bolts and nuts 50x6 mm., , oxidised mild steel sliding door bolt 300x16 mm., , oxidised mild steel sliding door bolt 250x16 mm., , oxidised mild steel door latch 300x20x6 mm., , oxidised mild steel door latch 250x20x6 mm., , oxidised mild steel tower bolt (barrel type) 250 x10 mm., , oxidised mild steel tower bolt (barrel type) 200 x

Central Government/Public Sector

CTN :45324560 Due date: 16 Jun, 202616 Jun, 2026 85.78 Lacs
Tender For project supply, installation, testing and commissioning of 20nos radar and accessories. sh civil works at yarada visakhapatnam phase-ii - extra for concrete work in superstructure above floor v level for each four floors or part thereof by mechnical means., reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) thermo- mechanically treated bars of grade fe-500d or more., centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers, brick work with non modular fly ash bricks conforming to is:12894, class designation 10 average compressive strength in super structure above plinth level up to floor v level in :cement mortar 1:4 (1 cement : 4 coarse sand), providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)., providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete., providing and fixing is : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm, fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately), providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & other frames/chowkhat comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in- charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). frame size 45 x 70 mm, providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite

corporations/Associations/Others

CTN :45328177 Due date: 05 Jun, 202605 Jun, 2026 62.00 Lacs
Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on turnkey basis under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of centralised materials, 11 kv switch gear 600/300/5a 350 mva i/c, 11 kv switch gear 200/100/5a 350 mva o/g, 11 kv 3x300 mm2 xlpecable, 11 kv 3x120 mm2 xlpecable, 24 volt battery, 24 volt battery charger, pcc. 8.5 mtr. long for feeder, 11 kv tpmo switch with fixing clamp, 11 kv top channel, 11 kv dropper angle, earthing complete, stay set complete, 11 kv polymer pin insulator, 11 kv polymer disc insulator, 11 kv disc fiting, 33 kv control panel t/f, acsr weasel conductor, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as join

corporations/Associations/Others

CTN :45333180 Due date: 16 Jun, 202616 Jun, 2026 NA
Tender For supply of removing white or colour wash snowcem paint etc by scrapping and sand papering , providing and fixing 1st quality ceramic glazed wall tiles conforming , 12 mm external cement plaster on rough side of single or half brick wall , providing and applying cement based water proofed wall putty , finishing walls with acrylic smooth exterior paint of required shade

CTN :45332914 Due date: 05 Jun, 202605 Jun, 2026 NA
Tender For supply of store for igloo - cement opc 43 grade , coarse sand river oblique m sand , graded stone aggregate 20mm , graded stone aggregate 40mm , pcc solid block of size 400 x 400 x 200mm 75 kg per cm2 , tmt steel 25mm grade fe 500 , tmt steel 16mm grade fe 500 , tmt steel 12mm grade fe 500 , binding wire 18 gauge , oil bound distemper , primer , polythene membrane sheet of grade 2504 thickness 150 micron , water proofing compound in 1 kg packing , blast door 3000 x 2800 as per elevation including all fitting and fixtures , ventilator 600mm dia with mesh , non sparking gritless flooring moc , explosion proof ip66 lighting and fittings , lightning protection system cu strip oblique finial , 16 sqmm 2 core lt ug xlpe cable 200rm and point wiring with 4 nos flame proof lights , transparent pipe 5mm dia bore for water leveling best quality , iron bar 600mmx16mm to bend 12mm and 10mm tmt bar , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle , fish line best quality , plumb bob iron best quality , galvanised iron pan mortar tasla 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle min wt 5 kg without handle , picks axes with chiesel and point ends kudali 14 cp nominal wt 3 kg overall length min 595mm with handle , showel square nose 14 gauge tata high carbon steel blade size 310 x 245mm shaft size 710mm fitted with strong steel crutched wooden handles , painting brush 100 mm best quality , synthetic tarpaulin 550 gsm of size 30ft x 30ft colour green , multipurpose non slip rubber reusable gloves for scrubbing cleaning brick work etc colour olive green oblique black , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia outer pipe od 60mm and inner pipe od 48mm of 3mm all as per brief technical specification , ms centering plates of size 90cm x 60cm of thickness 14 guage with two stiffeners including all necessary jointing arrangement nut bolt and jointing cleats as per tech specs , portable ms body needle vibrator machine with power 3 hp to 5 hp weight 20 to 30 kg petrol engine with min frequency 50 hz voltage 200 to 300 for concrete vibrating as per tech specs

CTN :45347371 Due date: 06 Jun, 202606 Jun, 2026 52.56 Lacs
Tender For supply of drywall cross-recessed screws , 35 mm ms drywall cross recessed screws , supply of pressure sensitive self- adhesive , mcb single pole 230v ac 50 hz 6 amps , mcb single pole 230v ac 50 hz 16 amps , mcb distribution boards in sheet metal enclosure 8 ways , residual current circuit breaker , white cover plate with frame 3 module , white cover plate with frame 6 module , white cover plate with frame 1 module , 3 module concealed metal flush box , 6 module concealed metal flush box , 1 module concealed metal flush box , 25mm x 16mm pvc casing capping , 25mm pvc casing capping l bend , pvc casing capping t 25mm , pvc casing capping elbow 25mm , pvc casing capping square box 4 inch x 4 inch , supply of 250 mm pvc exhaust fan with louvers , supply of 450 mm plastic wall mounting fan , water dispenser 20 lt , 110mm dia upvc swr pipe single socketed , 110mm dia upvc single tee , 4 inch dia 110mm dia upvc bend , 110 x 110mm nahani trap with jali , 50mm dia upvc swr pipe , 50mm dia upvc socke , upvc 50mm air vent cowl , 110mm upvc end cap , 20mm dia 3 layer pp r , 20mm elbow suitable for 20mm dia pp r pipe , 20mm socket suitable for 20mm dia pp r pipes , 20mm equal tee suitable for 20mm dia pp r pipe , 20mm union suitable for 20mm pp r pipes , pp r end plug 20mm confirming , pp r pipe clamp suitable for 20mm piping , ppr tank connector 20mm with check nut and washe , ppr reducer socket 20mm 15mm , upvc reducer socket 110mm 50mm , ppr reducer elbow 20 15mm , white lead , thread cotton ball , pure virgin polytetrafluoroethylene , chrome plated cp towel ring , cp stop cock 15mm , cp bib cock 20mm with flange , water storage tank double layer 1000 ltrs , snow white colour wash hand basin of size 550 x 400mm , cp soap dish , cp pillar cock 15mm , 600x450mm silvered glass , isi marked solvent cement for joining , factory made upvc door of size 750mmx1800mm , towel rail cp 750mm long , vitreous china squatting pan orissa pattern , pvc valve less syphonic action type , two tier sleeping bunks , single piece cushion made of 100 mm thick , 60 ltr plastic waste bin dark brown colour , 1200x750 x 3.5mm thick silvered glass looking mirror , providing and fixing wall mounted hanger strip 450mm in length , heavy duty slotted angle metal luggage rack 381mm x 914mmx1524mm , bricktrowel , drop forged high grade carbon steel brick hammer , lightweight extruded aluminum alloy straight edge , plaster trowel , 16 inch 400mm diameter mortar pan tasla , high tenacity nylon monofilament line , cast iron plumb bobs , heavy duty metal hand rammers , heavy duty pickaxes , shovel square , carbon steel powrah , flat painting brush , industrial rubber glove , aluminium spirit levels 12 inch , transparent flexible pvc water leveling tubes in 50 m , cutting pliers , non metallic fiberglass measuring tape 15 m , heavy duty crow bar 5 feet , trolley mounted earth auger , portable honey sucker , earthing electrode , gi pipe 100 mm dia med grade , back filled compound , ms earth pit cover of size 30 cm x 30 cm with handle , aluminium strip , iron spikes 16 inch long , gi strip of size 32 x 6mm, 3.00m long , gi nipple 20mm dia and 10cm long , gi reducer socket 40x20mm , lightning air terminal a copper tube 150 cm long x 25 mm dia , ms clamp 40x2mm with nut and bolt complete , gi wire 12 gauge , earth augur , upvc pipe 3m long 6 inch dia , user manual , tester set , gi pipe medium grade , gi pipe 40 mm bore , 50 mm bore gi pipes sleeve , crystaline condcutive mixture , stainless steel hamam tank 1000 ltrs , heating device kerosene based , fire extinguisher 2 kgs capacity //bid details 2 / 95

CTN :45178478 Due date: 01 Jun, 202601 Jun, 2026 13.25 Lacs
Tender For corrigendum : estimate for lining/relining of watercourses of o/l rd 108968-l/ 131968-l of sukhchain mr. by laying brick masonry (bed cement concrete) of village bhaggu distt. fazilka.

CTN :45178482 Due date: 01 Jun, 202601 Jun, 2026 80.00 Lacs
Tender For corrigendum : estimate for lining/relining of watercourses of o/l rd 29720-r of bhagsar mr. by laying brick masonry (bed cement concrete) of village lakhewali distt. sri muktsar sahib.

CTN :45309786 Due date: 02 Jun, 202602 Jun, 2026 50.00 Lacs
Tender For material purchege and hiring of equipments in gram panchyat 6 dwm - / / , - / , , . . ., , / , - /local, 40mm ( )( 1/11), 40mm ( )( 1/11), 20mm ( ), 12/10/6mm ( ), , 63-40 ( 1/11), 63-40 ( 1/11), 90-45 . ( 1/11), ( 1/6), ( 1/6), (pi 4-6)( 1/6), (i st class), (ii class), fly ash bricks, 900 , 901 2300 , 2300 , ( ) 900 , ( ) 901 2300 , ( ) 2300 , ( 20mm ) 900 , ( 20mm ) 901 2300 , ( 20mm ) 2300 , ( 20mm ) , , ( ii quality/ 20mm ) 900 , ( ii quality/ 20mm ) 901 2300 , ( ii quality/ 20mm ) 2300 , 100 x 75 ., 125 x 75 ., glazed size-30x45 cm, mosaic size-40mm thick, vitrified size-60x60 cm, interlock tiles/brick/block for road work cement interlocking block m-30grade, 60mm thick, interlock tiles/brick/block for road work cement interlocking block m-30grade, 80mm thick, interlock tiles/brick/block for road work cement interlocking block m-30grade, 100mm thick, isi marked 1.50 . ., isi marked 2.50 . ., isi marked 0.50 . ., isi marked 1.00 . ., isi marked 4.00 . ., isi marked 6.00 . ., ( , ) , (30 mm , ), ( fe 415/500 ), 18 , , / / / , (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, (24 , 14 ), 40 , 3 . . , , (water bound), - ( / ), ( / ), hsd, , (25 mm thick), ( ) . . 22 (0.80 mm), ( ) . . 24 (0.63 mm), ( ) . . 22 (0.80 mm), ( ) . . 24 (0.63 mm), . . 1 . . , . . 22 (0.80 m.m.), 6mm(2.5/2.75x1m), . . . 1 mm ( / ), (183x90), . . 15 . . (b class), . . 20 . . (b class), . . 25 . . (b class), . . 75 , . . 100 , . . . 90 . . ( ), . . . 110 . . ( ), . . . 140 . . ( ), . . . 110 . .(2.5kg/sq.cm) , indian w.c., orrisa w.c., european w.c., (foot rest), (urinal) 430*350*300mm , . . . , (wash-basin )450*300mm , . . . , . . (dia 15 mm) (is mark), . . (dia 15 mm)(is mark), 125 . . . . (grating), . . . np3 1200mm , . . . np3 1000mm , . . . np3 750mm , . . . np3 600mm , . . . np3 450mm , . . . np3 300mm , . . . ( (is:12701-1989 ), 6 x 75 , isi marked 25 . . , isi marked 20 . . , 20 . . , 20 . ., , 25 . . , 20 . . ( ), 3 , 2 , 2 , 3 , 15/16 , 5/6 , , isi marked 3 5/6 , , isi marked 6 15/16 , 2+2 , , , 2+4 , , , 2+6 , , , ( ) 15.00 . . , ( ) 40.00 . . , 8 swg (4.00 . . ) (0.117 / .), / , , 8 10 , , 4000 , 5-7 , niddle/plate , ( , ), hydrolic excavater/jcb (bucket capacity 0.4cum), , , , , , , ( ), ( , )
 Loading, Please wait...

Connect us via What's Up