Latest porch Tenders | Government porch Tenders

Central Government/Public Sector

CTN :45556958

25 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of graphic display board on foamed pvc sheet with floor standing ms frame for locomotive technical information consisting of the following: a) display board: foamed polyvinyl chloride (pvc) sheet conforming to astm d790, of size 4 ft (h) x 3 ft (w) x 3 mm thickness, printed with technical information of wap-7 locomotive equipment including system diagrams, equipment details, and maintenance/safety instructions in colour and resolution: 150 dpi or higher. graphic design and content shall be finalized and approved by consignee prior to printing. b) structural frame: dual-side four-leg made of hr ms steel tube of size:2 inches x 1 inches conforming to is 513 cr1 grade, fitted with metallic holding clamps, and eva corner caps/buffers, with overall dimensions of 119 cm x 55 cm x 50 cm, spray permanent black colour. note: double-sided acrylic foam adhesive tape of make 3mor similar, model 3m ia120100531 high strength bond tape (12 mm x 5 m) in black colour, along with compatible primer, shall be provided for fixing of the pvc sheet. size of frame: 6'h x 3'w x 2'd. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45564663

25 Jun, 2026 50.00 Lacs

Sawai Madhopur - Rajasthan

Tender For supply of various good and materrials in gram panchayat maksudanpura under all schemes- ghadla/kankar/jhajhra , mortar/mud mixture, , kali kiln lime for lime masonry work, , cement, , ppc, , white cement, , fine aggregate, , sand/gravel, , gravel - local, , rakhi (fly ash), , surkhi, , stone dust (in masonry), , ballast stone/brick (for other than road work), , 40mm measuring stone (hand-broken grit) (voids carte 1/11), , 40mm grit stone (crushed) (cut voids 1/11), , 20mm grit stone (crushed), , 12/10/6mm grit stone (crushed), , brick mortar, , material for road work (including 5 km lead), , 63-40 mm crusher broken stone crushed (cut voids 1/11), , 63-40 mm hand-broken stone aggregate (voids cart 1/11), , 90-45 mm hand-broken stone aggregate (voids cart 1/11), , quarry rubbish (cut the voids 1/6), , gravel (voids cart 1/6), , conker (voids cart 1/6), , binding material (pi 4-6) (cut voids 1/6"), , brick (22.5 x 11 x 7.50 cm), , first class (ist class), , ii class, , soling / kharanja / masonry stone, , chinnai berdha (rr), , masonry rubble (cr), , kharanja soling (for floor work up to 15cm height), , kharanja soling (23cm height for road kharanja work), , jodhpuri type stone slabs/arches/slabs (length 2-3', width 10-12", thickness 2.5-3.5"), , flaky material (3-4" thick & length and width 1-2"), , sandstone (dpc, sill, coping, lintel, tand, almirha etc.), , up to 25mm thickness, , up to 25-40mm thickness, , up to 40-50mm thickness, , up to 50-75mm thickness, , up to 75-100mm thickness, , up to 100-150mm thickness, , flooring / patti patan katla stone, , floor slabs upto 35mm thick, min, 3 sqft or more area, , katla for patti patan 60-75mm thickness, min, 3 sqft or more area, , unpolished rough kota stone, , up to 900 sq cm, , - 901 to 2300 sq cm, , more than 2300 sq cm, , polished kota stone (one side polished), , up to 900 sq cm, , = 901 to 2300 sq cm, , more than 2300 sq cm, , marble stone (makrana adanga 20mm thick), , up to 900 sq cm, , = 901 to 2300 sq cm, , more than 2300 sq cm, , marble chips, , marble powder, , marble stone (rajnagar || quality/local 20mm thick), , up to 900 sq cm, , - 901 to 2300 sq cm, , more than 2300 sq cm, , stone frame, , single pattern size 100 x 75 mm,, , double patam size 125 x 75 mm,, , stone slabs, , up to 1,5 m length, minimum 40mm thick, , 1.5 m to 2.40 m length, minimum 50mm thick, , 2.4 m to 3.0 m length, minimum 65mm thick, , above 3.0 m length, minimum 75mm thick, , precast tiles/blocks, , glazed size-30x45 cm, , mosaic size-40mm thick, , vitrified size-60x60 cm, , interlock tiles/brick/block for road work, , cement interlocking block m-30grade, 60mm thick, , cement interlocking block m-30grade, 80mm thick, , cement interlocking block m-30grade, 100mm thick, , fr pvc insulated copper conductor single core cable isi marked, , 1.50 sq mm, , 2.50 sq mm, , 0,50 sq mm, , 1,00 sq. m,, , 4.00 sq mm, , 6.00 sq mm, , local wood with fittings (for doors, windows and furniture), , mango, , acacia, , other, , factory made doors (30 mm thick, solid core single pane), , structural steel, , iron (or steel fe 415/500 for reinforcement), , winding wire 18 gauge, , iron guard, , conical iron/squared bar/patti/angle iron, , barbed iron wire (size 12 guage wire and 12 guage strad/12 guage, , wire and 14 guage strad/14 guage, , forged, , iron mesh (24 gauge, 14 mesh), , cement concrete lattice sky patal 40mm thick, , glass, , 3mm thick glass, , color paint, , inamil paint, , distemper (water bound), , for lime-plastering (aras / bud), , primer (for iron/wood), , petroleum products, , diesel hsd, , mobil oil, , bitumen shalitax board (25 mm thick), , plain sheet, , gi sheet 22 gauge (0.80 mm), , gi sheet 24 gauge (0.63 mm), , m.s. sheet 22 gauge (0.80 mm), , m.s. sheet 24 gauge (0.63 mm), , corrugated sheet, , gi sheet 1 mm thick, , gi sheet 22 gauge (0.80 m.m.), , asbestos cement sheet 6mm(2.5/2.75x1m), , other sheets, , pvc sheet 1 mm thick (coloured/plain), , green yellow literoof expo sheet (183x90)

Central Government And Public Sector

CTN :45525671

13 Jul, 2026 38.80 Lacs

Mumbai - Maharashtra

Tender For renovation of supply air-conditioning system of k-4 and k5 with other accessories for rlg, barc, mumbai - design, fabrication, supply, installation, testing and commissioning of chilled water base double skin 10000 cfm ahu (without blower) as per clause no. 01 of technical specification., supply, fabrication and installation of ms supporting structures as per clause no. 02 of technical specification., design, supply, fabrication and installation of galvanized steel sheet for discharge air ducts as per clause no. 03 of technical specification., supply and installation of magnehelic gauge pressure range 0 to 25 mm wc including fittings as per clause no. 04 of technical specification., supply and installation of pressure gauges (0 to 7 kg/cm2 range) including fittings and ss ball valve as per clause no. 05 of technical specification., supply and installation of bar stock type ss thermowell with temperature guage as per clause no. 06 of technical specification., supply, fabrication, welding, installation, testing & commissioning of 80 mm nb schedule 40 carbon seamless steel pipe line including fittings as per clause no. 07 of technical specification., supply, fabrication, welding, installation, testing & commissioning of 100 mm nb schedule 40 carbon seamless steel pipe line including fittings as per clause no. 07 of technical specification., supply, fabrication, welding, installation, testing & commissioning of 125 mm nb schedule 40 carbon seamless steel pipe line including fittings as per clause no. 07 of technical specification., supply, installation, testing & commissioning of 50 mm size cpvc pipe with fittings as per clause no. 08 of technical specification., supply, installation, testing and commissioning of 100 nb mm dia flange ended gate valve ( ci body and gun metal internal)with suitable fittings and counter flanges for pipelines as per clause no. 09 of technical specification., supply, installation, testing and commissioning of 80 nb mm dia flange ended gun metal gate valve with suitable fittings and counter flanges for pipelines as per clause no. 9 of technical specification., supply, installation, testing and commissioning of 80 nb mm dia globe valve with suitable fittings and counter flanges for pipelines as per clause no. 10 of technical specification., supply and installation of all-around cold insulation saddles for chilled water pipeline along with fixing fittings as per clause no. 11 of technical specification., supply and installation of aluminium construction powder coated air diffuser along with volume control damper as per the clause no. 12 of the technical specification., supply and installation of 38 mm thickness close rubber cell cold insulation of classo fire rating followed by aluminium clading as per clause no. 13 of technical specification., supply, fabrication, installation and commissioning of the ss structural material including ss hardware. as per clause no 14 of technical specification., fabrication, supply and installation of ss construction multilouvered volume control dampers (vcd) along with electricaly operated modulating type actuator as per clause no. 15 of the technical specification., supply, fabrication and installation of plenum connection to existing blower as per clause no 16 of the technical specification., dismantling, segregation, removing & shifting of various equipment like ahu, insulated pipes along with supports, fittings, valves etc. as per the clause no. 17 of the technical specification.

CTN :45568052

06 Jul, 2026 8.00 Lacs

Ernakulam - Kerala

Tender For demolition of existing old car porch and constriction of new car porch

State Government

CTN :45551756

30 Jun, 2026 78.23 Lacs

Raipur - Chhattisgarh

Tender For construction of lounge & porch at state hangar mana, raipur chhattisgarh.

Central Government/Public Sector

CTN :45550439

25 Jun, 2026 NA

Multi City - Rajasthan

Tender For auction sale of depot ferrous scrap - 98050102 scrap lot consists of rust fines (iron sand) generated due to oxidation and corrosion of turning and boring chips/boring swarf. the material is lying scattered along both sides of railway track line no. 07. the lot may also contain small pieces and fragments of ms (mild steel), ss (stainless steel), and ci (cast iron) if any, mixed with the rust fines. if any pieces of large size melting or structural part found, that will not include in lot. cond. 1- loading by purchaser 2. delivery in only rto registered vehicle. location- alongside line no-07. note: - all purchasers are kindly requested to communicate through ireps only for matters related to power of attorney, delivery orders (do), delivery dates, and other relevant correspondence. offline requests shall not be entertained. requests (related to final delivery) shall be placed atleast seven days in advance so that there is sufficient time with competent authority for scheduling of scrap delivery.

Central Government/Public Sector

CTN :45384656

20 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For corrigendum : provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, c

Central Government/Public Sector

CTN :45531615

29 Jun, 2026 NA

Multi City - Multi State

Tender For auction sale of - e-auction for commercial publicity/advertisement right through digital display screen (digital video wall) with display of commercial advertisement and railway information in 50:50 time sharing basis under rdn digital policy at entrance of porch wall facing station main entry/exit side at rewari railway station. (total area-82x2.5=205 sq. ft.)

Central Government/Public Sector

CTN :45531616

29 Jun, 2026 NA

Multi City - Multi State

Tender For auction sale of - e-auction for commercial publicity/advertisement right through digital display screen led with display of commercial advertisement and railway information in 50:50 time sharing basis under rdn digital policy at pillars of entrance of porch & exit dome of station wall piller dome at 1st entry rewari railway station of jaipur division. (total area-(11x4)-4)x5x4=800 sq. ft.) (40 sides)

CTN :45509557

22 Jun, 2026 9.97 Lacs

Jaipur - Rajasthan

Tender For nirmanadin panchayat samiti bhawan kishangarh renwal ke plinth protection avm porch vikas karya

Porch Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors