Latest portable hardness tester scrap Tenders | Government portable hardness tester scrap Tenders

State Government

CTN :39978168

02 May, 2025 1.50 Lacs

Sagar - Madhya Pradesh

Tender For supply of medicine> - generic/branded alopethic medicine,surgical item, pethological testing and item as gaz,bandez,cottonrolls branded, handsenetizer, and other all types ayurvedic, homopethic medicine sabhi dabaiya government ferm se uplabdh na hone par kray ki jabegi. doctor paramarsh ki aawashyaktanushar.

CTN :40005571

28 Apr, 2025 NA

Vapi - Gujarat

Tender For supply, installation, testing and commissioning of electro mechanical works of pumping machinery with associated mechanical and electrical equipments, instruments & accessories etc for different head works of vapi municipal corporation area. - item no.1: submersible type pump setsupply, installation, testing and commissioning of submerged submersible pump sets with suitable for working on three phase, 50 hz3percentage ,415v10percentage ac supply, suitable rpm with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamp, pipe fittings, mechanical seal, bearing bush, strainer, pump sensors and other protection, pump control unit etc. suitable construction of foundation/ installation device with cable length from pumps to panels and of following material of construction:m.o.c :- casing : ci, impeller : ss cf8m, wearing ring and bearing bush : bronze, tc mechanical seal, cs/ss bearing, ss shaft with sleeve, ss strainer and ms motor body fasteners : ss 316l, guide rail : ss 316, lifting chain : ss 316capacity of pump - 833 lpm and 35 m. head (15 kw/ 20 hp) - 1 working + 1 standby. the price should include water in oil sensor and io 113 for mechanical seal and motor protections suitable for each pumps., capacity of pump - 1667 lpm and 35 m. head (18.5 kw/ 25 hp) - 1 working + 1 standby, capacity of pump - 2083 lpm and 35 m. head (22 kw/ 30 hp) - 1 working + 1 standby, capacity of pump - 2500 lpm and 35 m. head (22 kw/ 30 hp) -(only supply of pump set - without installation), capacity of pump - 3333 lpm and 35 m. head (30 kw/ 40 hp) - 1 working + 1 standby, capacity of pump - 5833 lpm and 35 m. head (48.75 kw/ 65 hp) - 1 working + 1 standby, capacity of pump - 8333 lpm and 35 m. head (75 kw/ 100 hp) - 1 working + 1 standby, capacity of pump - 7333 lpm and 45 m. head (82.5 kw/ 110 hp) - 1 working + 1 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp) - 1 working + 0 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp (only supply of pump set - without installation), capacity of pump - 14286 lpm and 35 m. head (110 kw/ 150 hp) - 1 working + 1 standby, capacity of pump - 16667 lpm and 35 m. head (132 kw/ 180 hp) - 2 working + 1 standby, capacity of pump - 25000 lpm and 26 m. head (150 kw/ 200 hp) - 1 working + 1 standby, item no.2: submersible non-clog vertical pumpsupply, installation, testing and commissioning of sewage submersible, non clog type suitable for working on three phase, 50 hz 3percentage , 415 v 10percentage , ac supply, 1450 rpm synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete set and following m.o.c: casing: ci, impeller: ss cf8m, wearing ring and bearing bush: bronze, tc mechanical seal, cs / ss bearing, ss shaft with sleeve, ss strainer and ms motor body.capacity of pump - 15 kw/ 20 hp - 2 working the price should include water in oil sensor and io 113 for mechanical seal and motor protections., item no.3: manufacture, supply, lowering, laying, jointing, welding and delivery of electric resistance welded (up to 400mm)/submerged arc welded(above 400mm) m.s.pipe having bevelled ends plate or coil conforming to is-3589-2001 or its latest revision/ amendment for following thickness outside diameter at gwssb store or site anywhere in gujarat state including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all complete charwada 2 - jalaram mandir - 219.1 mm dia. (4.5 mm thick)- delivery pipe, balitha 1 - near kabrsthan - 273 mm dia. (5 mm thick)- delivery pipebalitha 2 - bhandarwada - 273 mm dia. (5 mm thick)- delivery pipechhiri 1 vallabh nagar - 273 mm dia. (5 mm thick)- delivery pipe, dungra - azad nagar - 323.9 mm dia. (5.6 mm thick)- delivery pipe vapi - naikwad tanki - 323.9 mm dia.

CTN :39977436

29 Apr, 2025 NA

Duliajan - Assam

Tender For procurement of closed drain tank & sump pump for development of condensate removal system (dehydration system) & the associated facilities - supply of closed drain tank & sump pump at madhuban (duliajan), supply of horizontal, cylindrical, underground inside pit, saddle mounted closed drain tank of capacity 27.5 m3 with inlet size of 6 nb, ansi rating 150#, with blind/mounted flanges for nozzles as required as per tender specification, attached p&id, data sheets and technical specifications etc., gaskets for all flange joints as mandatory spares, fasteners for all flange joints as mandatory spares 20% (min. 04 nos. of each size & type), gaskets for all flange joints as pre-commissioning & commissioning spares, fasteners for all flange joints as pre-commissioning & commissioning spares 10% (min. 02 nos. of each size & type), design, engineering, manufacture, procurement of materials and bought out components including, assembly at shop, inspection, testing at manufacturers works, packing & delivery, supply of vertical submersible (type vs4) sump pump with design flowrate of 6 m3/hr as per data sheet, p&id and technical specifications including supply of all commissioning spares, special tools and tackles, supervision of erection and commissioning of item no.1 & 2 (with per diem rate).

Central Government And Public Sector

CTN :39978436

01 May, 2025 34.81 Lacs

Kaiga - Karnataka

Tender For supply, fabrication, welding/joining, erection and testing of hdpe piping from kgs 3 and 4 to kaiga 5 and 6 area. - supply items (schedule-a), 100 nb equal tee sch 40 astm a 234 gr. wpb sml bw ansi b 16.9, 1oo nb sorf flange 150 # astm a 105 ansi b 16.5, 100 nb blind flange 150 # astm a 105 ansi b .16.5, 100 nb gate valve manual op. flange end 125/150 # sa 216 gr. wcb ansi b 16.34, 100 nb ball valve manual op. flange end 125 /150# hdpe, suit to 100 nb,sa 105, 150 # ansi b 16..5 back ring flange, flange end mechanical type flow totalizer 150# (range 150000 to 200000 cu. mtr.capacity) to suit to 100 nb sa 105 flange 150 #, ansi b 16.5. flow meter totaliser specification, dn-110 hdpe pipe is 4984 gr. pe 80 pn 6, dn-110 hdpe 90 degree elbow, is 4984 gr. pe 80 pn 6 as per is 8008, dn-110 pipe /stub end, 1s 4984 gr pe 80 pn 6 as per is 8008., 100 nb cs back ring flange astm a 105 as per ansi b 16.5 150#, dn-110 hdpe equal tee, is 4984 gr.pe 80 pn 6, as per is 8008, dn-50 hdpe cap, is 4984 gr. pe 80 pn 6, as per is 8008., hexagonal headed bolt, nut with washer 85 mm long is 1363 gr. 6.3 /is 3757 gr. 8.8, ismc 100 is 2062 , e 250 gr. a, 12 mm thick plate is 2062 , e 250 gr. br, 110 nb ms u clamp 25 mm wide x 3.5 mm thick, 100 nb m 12 u bolt is 2062 e 250 gr. a, m 10 x 100 hst/faz, 1.6 mm thk caf gasket 100 nb is 2712 gr. w/3, erection item (schedule-b), butt fusion welding / joining and laying of dn- 110 hdpe pipe, is 4984, grade pe 80, pn 6 both under ground and above ground., butt fusion welding / joining and erection of dn-110 90 degree elbow, hdpe, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of both end), butt fusion welding / joining and erection of dn-110 hdpe equal tee, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of three end), butt fusion welding / joining and erection of dn-110 hdpe pipe end /stub end is 4984, grade pe 80. pn 6, butt fusion welding/joining and erection of dn-50 hdpe cap is 4984 grade pe-80 pn-6, installation of 100 nb hdpe ball valve without welding., fabrication , erection , welding, inspection,surface cleaning & supply and application of hb chlorinated rubber zinc phospate primer paint in two coats to minimum 100 micron dft and supply and application of hb chlorinated rubber finish paint in two coats to 60 micron dft for cs structural steel support and components., installation of anchores m10 x 100 mm hst/faz including handling,scafolding,labour & tools., removing & reinstallation of precast concrete slab 0.3 m (l) x 1.350 m (w) x 0.1 m (t), excavation and backfilling of excavated trenches with the soil after completion of installation of pipe lines and testing including levelling/grading, compaction to the required level 1.5 m (d)x 0.8 m (w), sand bedding 50 mm depth x 400 mm width for underground hdpe piping including supply of sand., dismantling of existing dn-50 hdpe piping including breaking of existing cement concrete ( 0.7 cub.mtr) & pcc to be done after breaking and removing of existing cement concrete, including tools, labour & disposing of unservicable material as directed by eic, carefully removing the korean grass along with soil of 100 mm to 250 mm depth and 1500 mm width including replacing the same removed korean grass along with soil after laying hdpe line along with tools & tackles,watering of grass,dressing of area etc.in all complete as per direction of eic

Central Government/Public Sector

CTN :39756201

28 Apr, 2025 NA

Kanakapura - Karnataka

Tender For corrigendum : supply,installation,commissioning & testing of stainless steel tubes and d ouble ferrule fittings for lhb hot buffet car & amrit bharat lcbnacab coaches, as per d rawing: rcf/md/mat sch/lwcbac , ver-01 , packing instruction: as per standard packing. it sho uld be ensured that item should not rub during transportation. the item should be pa cked with adequate strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

CTN :39964740

29 Apr, 2025 NA

Haridwar - Uttarakhand

Tender For supply of excavating over areas exc 1 point 5 m deep and , excavating over areas exc 1 point 5 m deep , ml for moorum red bajri filling in , ml for hard core of broken stone and , ml for cement concrete type d , ml for rcc m25 as in foundations , ml for rcc m25 as beams cantilevers , ml for rcc m30 as in foundations incl , ml for rcc m30 walls , ml for rcc m25 as in columns pillars piers , m l for tmt bars 10 mm dia , ml for formwork to sides of concrete , ml for formwork to faces of walls , ml for formwork to sides of pillars , ml for formwork to sides and , ml brick work with sub class brick , ml for damp proof course to h , m l for rendering 10 mm thick on fair faces o , m l for rendering 15mm thick on fair faces of , m l for preparation of new wall surfaces and , preperation of new plastered surfaces a , ml for 75 mm thick pcc , sf gl frame work for seamless ceiling , ml for hangers 6 mm dia , ml for providing and fixing , sf roof trusses framed , sf plates plain or chequered , ml for mild steel screw bolts , sf prepainted galvalume aluminum z , sf prepainted galvalume aluminum , m l for applying two coats of synthetic , ml for steel rolling shutters with out ball , removing excavated material n exc 50m and , ml for framed work as in doors or gates of a , sf wire netting of galvanised steel wire , sg gate valve 50 mm dia , sf 50 mm dia tubes med grade , material and labour for point , one 3 pin socket outlet 5 amps on , one 3 pin socket outlet 5 amps , material and labour for point wiring , material and labour for switch piano , material and labour for socket outlet , all as per serial item no 11 here in , material and labour for ceiling rose , supply and fix led flood light 35 36 37 w , supply and fixing sheet metal enclosure , supply and fixing mcb single pole 6 to 3 , supply and fixing mcb spn 50 to 63 am , material and labour for earthing , supply fix air circulator fans 230v , m l for bore well of depth 60 mtr , supply installation testing and , supply and fix foot valve , supply and fix sluice valves of 40 mm bore , supply laying and testing , double scull 2x , quadruple scull 4x equipment to , scull oars equipment to be , sweep oars equipment to , speed coach , heart rate watch , display led screen 10x8 , digital camera , mirror with aluminum frame with , stop watch , wall fan heavy duty , indoor rowing machine equipment , single scull 1x equipment to be bid details/ 2 / 53

CTN :39576212

16 Apr, 2025 NA

Srinagar - Jammu And Kashmir

Tender For supply of various glass ware and plastic ware items, at skims, soura, srinagar on one year rate contract basis. - item specifications note:- refer to nit for detailed item specifications, glass slides (75x25x1.25), conical glass flask (250ml), conical glass flask (500 ml), conical glass flask (1000 ml), conical glass flask (2000 ml), cylindrical flask 500ml, microtips (100 1000 l), microtips (0.5 - 10 l), micropipette tips (10 100 l), micropipette tips (20 - 200 l), glass funnels (large), glass funnels (small), glass funnels (medium), measuring cylinder (1000ml), measuring cylinder (500ml), measuring cylinder (250 ml), measuring cylinder (100ml), measuring cylinder (50ml), measuring cylinder (10ml), micropipette (variable) 100-1000 l, micropipette (variable) 1 10 l, micropipette (variable) 20 200 l, micropipette variable (0.2 2 l), micropipette variable (10 100 l), automatic pipette (10 100 l ), automatic pipette (100 l 1000 l), multichannel micropipette (100 1000 l) 8 channel, multichannel micropipette (2 l 20 l ) 8 channel, multichannel micropipette (30 l 300 l) 8 channel, multichannel micropipette (10 l 200 l ) 8 channel, microfuge tubes 1.8ml, microfuge tubes 1.5ml, tri-sodium citrate tubes (double sandwich) 1.8ml, blood collection tubes with edta k2 tubes with following specifications:1. capacity 2ml2. should have k2 coated in dried form.3. cap should have leak proof rubber cap with needle pierceable & plastic shield., blood collection tubes with clot activator, sodium floride tubes, urine processing tubes 10ml, sterile plastic urine containers 50ml, pasture pipettes with teets, cell counters, neubar chamber (improved), filter paper grade 1medium flow 11 m thick, dimensions: 460mm x 570mm, filter paper (410 r) ashless, digital ph meter, thermometers (for waterbath upto 100oc ), forceps (disecting) 6 inches, cover slips (22x22mm), cover slips (22x40mm), charged slides (22x40mm), cover slips (18x18mm), slide carrying trays aluminum 30x20cms with lock clips, slide drying rack (15x25 cms), glass beaker 1000 ml, glass beaker 500ml, glass beaker 250 ml, glass beaker 100 ml, glass beaker 50 ml, glass beaker 10ml, metal enamel tray 30x35 cms, staining racks (triangular slide with tapered top), staining dish (glass), slide staining rectangular bars stainless steel 36cm length, comet dropping bottles 60ml plastic material, tube holding rack with the capacity to hold 100 tubes, pcr tubes (0.2ml), polypropylene conical tubes 15ml (falcon tubes), polypropylene conical tubes 50ml (falcon tubes), plastic stand for 15ml conical tubes, plastic stand for 50 ml conical tubes, plastic droppers (5ml), terrasaki plates for hla typing, aluminum chambers for patch testing, tip boxes for 10 l tips, tip boxes for 100 l tips, tips boxes for 1000 l tips, racks for holding 0.2ml pcr tubes, pipette stand for micropipettes, culture bottles flat type (sterile 100ml), discard jar 5 ltr., reagent bottle with screw cap autoclavable (1000 ml), reagent bottle with screw cap autoclavable (500 ml), reagent bottle with screw cap autoclavable (250 ml), reagent bottle with screw cap autoclavable (200ml), reagent bottle with screw cap autoclavable (100 ml), dilution bottles 500ml, gastric lavage bottles 200ml plastic, evidence bag 12 x 16 , animal cell culture media bottle 250ml, epindrof tubes (micro tubes) 1ml, gluco meter pen, blood glucose monitoring strips (successful bidder will have to provide one gluco meter free of cost with every 1000 strips). , multi sticks for urine examination, blood lancets, ph tablet 4.0, ph tablet 7.0, ketone meters, ketone strips, biochemistry disposable cuvettes, assorted racks, autoclavable mesh baskets (medium size), cryovials (1.8ml) screw cap sterile, multipurpose stands (plastic), petri dishes 90mm plastic (autoclavable), storage vials screw caped (2ml), two quadrant petri plates 90mm autoclavable, microtiter plate (round bottom), sterile swabs (plastic), swab bowls, culture vials glass 30ml, culture vials glass 15ml, gl

CTN :39975208

22 Apr, 2025 NA

Izatnagar - Uttar Pradesh

Tender For supply of p. v. expansion moulding ( flat) size- 50 x 3 x 3600 mm long to n. e. rly. drg. no. sk-1457/c alt.2, fig. 1 item 4, colour.- as per drg. note:-material testing should be as per rdso specn. no. rdso/2015/cg-02 (rev. 1).

CTN :39594573

14 Apr, 2025 NA

Cossipore - West Bengal

Tender For corrigendum : supply of item -1 manufacturing testing inspection supply delivery of hot rolled u type steel sheet pile conforming to is 2314-1986 , item-2 manufacturing testing inspection supply delivery of hot rolled u type steel sheet pile conforming to is 2314-1986 , item-3 manufacturing testing inspection supply delivery of hot rolled u type steel sheet pile conforming to is 2314-1986 , item-4 manufacturing testing inspection supply delivery of hot rolled u type steel sheet pile conforming to is 2314-1986 , item-5 manufacturing testing inspection supply delivery of hot rolled u type steel sheet pile conforming to is 2314-1986

Central Government/Public Sector

CTN :39966344

05 May, 2025 NA

Mysore - Karnataka

Tender For supply of industrial safety foot wear to is 15298/2016 part ii, iso 20345:2011 en 12568:2010 or latest and the item to be as per the detailed technical specification & testing requirements enclosed in annexure a & b.

Portable Hardness Tester Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector