Latest portland cement Tenders | Government portland cement Tenders

State Government

CTN :45700595

01 Jul, 2026 NA

Akola - Maharashtra

Tender For supplying various material for construction of bharat nirman seva kendra at borala gp takli nimkarda tq balapur dist akola under mahatma gandhi national rural employment gurantee act.- all frame rail angle anodized , bricks , coarse sand , fine sand , plastic emulsion paint , portland cement , pvc gasket for glass , steel shuteering for roof, landing, balcony, having 12.5cm tk , steel tmt fe 500 , stone agreegate (single size) 12.5 mm nominal size , stone agreegate (single size) 20 mm nominal size , vitrified tile (matt finish)size 590 to 605 mm*590 to 605 mm*8 to 10 mm

State Government

CTN :45719782

04 Jul, 2026 NA

Rampur Hat - West Bengal

Tender For supply of materials for mgnrega works - supply of materials, earth, coal (steam), carriage of tar bitumen, bitumen vg-30, bitumen emulsion, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone screening type a (13.2 mm), coarse sand, stone aggregate(single size): 06 mm nominal size, grade 1 stone metal 63 mm to 45 mm, 1st class picked jhama bricks(traditional), 1st class bricks, coarse sand, stone boulder ( 225mm-150mm ), coloured inter locking c.c. paver block, fine sand, silver sand, portland cement, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, loading unloading & stacking sand/ stone aggregate (less than 40mm nominal size), stone aggregate(single size): 40 mm nominal size, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), medium sand, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia, rcc pipe 900 mm dia np - 3 spigot, carriage of r.c.c. pipes 900 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 900 mm dia, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), eucalyptus bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), brick aggregate (single size):40 mm nominal size, moorum, stone aggregate(single size):63 mm nominal size, river bed material, geotextile 120 gram per sqm membrane, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm

CTN :45724340

06 Jul, 2026 7.75 Lacs

Multi City - Telangana

Tender For procurement of leakage materials arresting of leakages and in division no.44, 45, 46,47,62,63 and 64 under annual maintenance for the year 2026-27 - 150 mm dia , 150 mm dia 15 mm thick , 160 mm dia , 200 mm dia , 200 mm dia 15 mm thick , 200 mm dia hdpe , 315 mm dia hdpe , 350 mm dia m.s , arresting of leakages at various locations in ward no. 44,45,46,47 &48 including earthwork excavation and arresting of leakages with required materials and red rock cement, portland cement, caulking, necessary apparatus leakage arresting and refilling of the excavated earth includind cost and conveyance of all tools materials and labour charges etc., complete. (a) 160 mm dia hdpe , cost of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (a) 100 mm dia 15 mm thick , manufacture, supply and delivery of di d/f gate valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade ggg-40/ sg- 400/15 or ggg-50/sg-500/7 or equivalent grade as per i.s.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with epdm food grade quality and seals of nbr and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per bs5163-89/is14846-2000/din 3202 f 4. all the valves should be with electrostatic powder coating both inside and outside pocket less body passage. drilled as per requirement of the dept. (a) 100 mm dia , manufacture, supply, & delivery of hdpe fittings conforming to is 4984 - 1995 including transportation to anywhere in t.g. excluding taxes. pipe end long neck (a) 110 mm dia , manufacture, supply,& delivery of high density polyethylene pipes (pe-100 grade) for water supply conforming to is 4984-2016 including transportation to any where in t.g, but excluding gst and specials etc.,complete(supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 metres.) 8 kg (a) 110 mm dia hdpe , supply and delivery of 53 grade opc cement bags including all charges etc., complete as per the directions of the departmet officer in charge. , supply and delivery of frc cement supply 5 kg bag including all charges etc., as per the directions of the departmet officer in charge complete. , supply and delivery of nuts and bolts including all charges etc., complete.as directed by the deparment officer in charge. , supply and delivery of packing rope including all charges as per the directions of the departmet officer in charge. , supply and delivery of rubber sheet including all charges etc., as per the directions of the departmet officer in charge complete. , supply, fabrication and fixing in position of ms for windows and grills including cost and conveyance of all material and all labour chages for fabricating, fixing including cost of welding rods, power charges, xcluding cost of fixing in positio etc complete.

CTN :45704186

11 Jul, 2026 3.70 Lacs

Bareilly - Uttar Pradesh

Tender For supply of boiler refractory - 1insulation fire bricks , 2special refractory , 3special refractory , 4special refractory , 5special refractory , 6special refractory , 7special refractory , 8special refractory , 9standard fire bricks , 10firecrete super castable , 11fire cement fireset

CTN :45604296

03 Jul, 2026 NA

Coonoor - Tamil Nadu

Tender For corrigendum : supply of hardware materials to all tantea factories - hardware materials, 1/2" pitch chain rolon/diamond, 3/4" pitch chain rolon, 5/8" pitch chain rolon, 5/8" pitch duplex chain rolon, 1" pitch chain, 1 1/4" pitch chain rolon/diamond, 10g ms welding electrode, 8g ms welding electrode, 10g stainless steel welding electrode, 1/4"x1" long bolt & nuts (rate per kg.), 3/8"x 2" long bolt & nuts (rate per kg.), 5/8 x2" long bolt &nuts, 5/8 x2 1/2" long bolt &nuts tvs make, m 12 x 50 mm bolt & nut, 5/16"x 1 1/2" long aluminum revit round head, 1/4"x 1 1/2" long aluminum revit round head, 1/4" x 1" long copper revit round head, 5/16" x 1 1/2" long copper revit, pvc liner 2 mm thick, 1/4" dia fire proof asbestose rope, 1/2" dia fire proof asbestose rope, 1/4" x 2" width asbestose flat fire proof rope, fire clay (rate for 40 kg bag), sircco cement (rate for 20 kg bag), asbestose powder (rate for 40 kg bag), castable refractory cement, cup shap grinding wheel, red oxide (per liter), emery cloth - rough and smooth (no.80,100,120), he 309-sleeve, woolen felt 1/4" thick, welding rod 7018 x 4 mm(sun arc), welding rod 6013 x 4 mm (sun arc), welding rod 6013 x 3.15 mm (sun arc), welding rod s.steel 4 mm (sun arc), grinding wheel -5" ( disc) bosch make, frp strips 2"x13"x5mm thick, frp strip 13" x 2" x1/4" thick, accoset 50 (refractory compount), grinding wheel (10" dia x1" widh x 1" bore x smooth), grinding wheel (10" dia x1" widh x 1" bore x rough), grinding wheel 5" (disc) bosch make, grinding wheel 4" (disc) bosch make, cutting wheel 5" (disc) bosch make, cutting wheel 4" (disc) bosch make, he 311 sleeve, he 316 sleeve, he 320 sleeve, h 311 sleeve, h 316 sleeve, h 320 sleeve, h 511 sleeve, h 520 sleeve, h 317 sleeve, h 313 sleeve, h 315 sleeve

CTN :45713694

02 Jul, 2026 NA

Kishtwar - Jammu And Kashmir

Tender For fixation of rate contract for supply of key construction material- sand, bajri, stone, portland cement, cgi sheets, structural steel, tmt steel bars, interlocking tiles of 60mm thickness etc, - under mgnrega in panchayat tagood block mughalmaidan

CTN :45713697

02 Jul, 2026 NA

Kishtwar - Jammu And Kashmir

Tender For fixation of rate contract for supply of key construction material- sand, bajri, stone, portland cement, cgi sheets, structural steel, tmt steel bars, interlocking tiles of 60mm thickness etc, - under mgnrega in panchayat horna block mughalmaidan

CTN :45713698

02 Jul, 2026 NA

Kishtwar - Jammu And Kashmir

Tender For fixation of rate contract for supply of key construction material- sand, bajri, stone, portland cement, cgi sheets, structural steel, tmt steel bars, interlocking tiles of 60mm thickness etc, - under mgnrega in panchayat inderwal c block inderwal

CTN :45713728

02 Jul, 2026 NA

Kishtwar - Jammu And Kashmir

Tender For fixation of rate contract for supply of key construction material- sand, bajri, stone, portland cement, cgi sheets, structural steel, tmt steel bars, interlocking tiles of 60mm thickness etc, - under mgnrega in panchayat kither block bunjwah

CTN :45713753

02 Jul, 2026 NA

Kishtwar - Jammu And Kashmir

Tender For fixation of rate contract for supply of key construction material- sand, bajri, stone, portland cement, cgi sheets, structural steel, tmt steel bars, interlocking tiles of 60mm thickness etc, - under mgnrega in panchayat patnazi-b block bunjwah

Portland Cement Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government