Latest positive pressure module Tenders | Government positive pressure module Tenders

corporations/Associations/Others

CTN :41121498

28 Jul, 2025 9.31 Lacs

Delhi - Delhi

Tender For t/m of drainage system under r-ii division. sh - replacement of existing damaged slab and filter media of rwh pits under r-ii division

State Government

CTN :41121702

28 Jul, 2025 2.95 Lacs

Mandi - Himachal Pradesh

Tender For construction of wss jhalwan batti replacement of chocked filter media of three layer in tehsil joginder nagar district mandi h.p sh replacement of 20 hp pump, 1 set under basp

CTN :39446532

21 Jul, 2025 1.53 Crore

Pune - Maharashtra

Tender For bid to ras bid to ras tender for supply of 100 percentage ethylene oxide gas cartridge 100gms , chem 8 cartridge for i stat compatable with i stat system portable blood analyzer , c arm covers sterile disposable , endo loop , endopath endoscopic bowel clamp with ratchet , endopath specimen retrieval bag , anti fog solution with 4 percentage alcohol concentration , bowie dick test pack chemical indicator class ii , chemical indicator tape roll for steam steriliser roll of 50 mtrs , chemical indicator class iv 1251 for steam 240 pieces per box , chemical integrator class v 1243 a for monitoring time temperatustre and steam penetration 500 pieace per packet , biological indicator 30 vials per box , process challenge device 3.0 hpr for steam , rpbms record producible bowie dick strip for steam , chemical indicator strips for eto sterilizer , eto chemical indicator tap , load control biological indicator for eo sterilization , class 4 plasma indicator with adhesive- made up of plastic for plasma sterilization box of 3200 , process challenge device 1.5 hpr for plasma , hmbi biological indicator 30eam case for plasma sterilizer , self seal sterilization pouch for steam eto and plasma 20 x 22 cm pkt of 200 , self seal sterilization pouch for steam eto and plasma 32 x 39.5 cm pkt of 200 , tyvek roll 20 cm x 70 mtr with plasma and eto indicators with iso 11607 and ce certifications , tyvek roll 41.25 cm x 70 mtr with plasma and eto indicators with iso 11607 and ce certifications , tyvek self seal pouch with plasma indicator size 20cm x 27.5cm pack of 200 , tyvek self seal pouch with plasma indicator size 22cm x34cm pack of 200 , tyvek self seal pouch with plasma indicator size 33cm x 34 cm pack of 200 , sterilization wrap with sms fabric and 99 percentage bacterial filtration efficiency 36 inch x 36 inch , balanced electrolyte solution with ph 7.4 and osmolarity 290 to 300 in self collapsible bag of 1000 ml. , balanced electrolyte solution with ph 7.4 and osmolarity 290 to 300 in self collapsible bag of 500 ml , sodium lactate compound ringer lactateisotonic solution 500ml self collapsible container ffs technology , embryo reduction needle , 35 mm x 10 mm plates ivf grade mea tested pack of 500 , denuding pipette stripper 135 to 140 microns ivf grade packof 10 , denuding pipette stripper170 to 175 microns ivf grade pack of 10 , cover slip packet of 10 gm , embryo glue 10ml , humidification bottle and filter for trigas benchtop incubator cook , slide , microscope , thickness 1.15 to 1.35mm size 75mm x 25mm , 2.7 1.5 detachable tip 3 cm dmso compatible neuro microcatheter like apollo , microguidewire , nitinol constrction , hydrophilic coating angled tip 0.014 inch diameter at least 180 cm length , evoh co polymer with dmso opacified for embolisation like onyx squid concentration to be specified at time of purchase , 14ml tube poly round bottom tubes individually packed ivf grade mea tested pack of 500 , antiseptic spray non embryotoxic of 1 litre human ivf grade , ivf media pack consisting of 1 x 50ml90 percentage densitygradiant , 1x 45 percentage density gradiant , 2 x50 ml fertilization. 2 x50 ml flushing media with proteins hepes , 4 x clevage media 1x100 ml all gradewash , 1 x 100 ml ivf grade oil , stapper handle for embryo handling

CTN :40906222

24 Jul, 2025 NA

Imphal - Manipur

Tender For corrigendum : supply of lab consumables and diagnostic reagents for free diagnostic services initiative - total bilirubin, bubc, sgpt/alt, sgot/ast, alk phosphatase, total protein, albumin, bun, creatinine, na+, k+, cl+, glucose, uric a, calcium, total cholesterol, triglyceride, hdl cholesterol, ldl direct cholesterol, amylase, lipase, troponin i, tsh, t3, t4, csf protein, csf glucose, lactate dehydrogenase (ldh), bicarbonate, phosphorus, versa tips, sample cups, dessicant pack, humidity pack, reference fluid, 7% bsa solution, immunowash fluid, microtips 2-200ul (500 per pack), microtips 200-1000ul (500 per pack), hypochlorite, antistreptolysin-o (aso) latex slide test kit (pack size 35 tests/kit box), c-reactive protein (crp) test (pack size 35 tests/kit box), hbs ag rapid test (30 test/kit), hcv ab rapid test (30 test/kit), rapid plasma reagin test (rpr) for syphilis (50 test/kit), rheumatoid arthritis (ra) factor (35 test/kit), lugol s iodine solution - 125 ml, amikacin- 50 disk per vial, amoxycillin- 50 disk per vial, amoxycillin/clavulanic acid- 50 disk per vial, ampicillin- 50 disk per vial, azithromycin- 50 disk per vial, aztreonam- 50 disk per vial, ampicillin & sulbactum- 50 disk per vial, cefexime- 50 disk per vial, cefazolin- 50 disk per vial, cefepime- 50 disk per vial, cefuroxime- 50 disk per vial, cefpodoxime- 50 disk per vial, doxycycline- 50 disk per vial, ciprofloxacin- 50 disk per vial, co-trimoxazole- 50 disk per vial, cefoxitin- 50 disk per vial, cefoperazone- 50 disk per vial, cefotaxime- 50 disk per vial, ceftazidime- 50 disk per vial, ceftriaxone- 50 disk per vial, clindamycin- 50 disk per vial, chloramphenicol- 50 disk per vial, colistin sulphate- 50 disk per vial, nitrofurantoin- 50 disk per vial, erythromycin- 50 disk per vial, fosfomycin- 50 disk per vial, gentamicin- 50 disk per vial, high level gentamicin- 50 disk per vial, imipenem- 50 disk per vial, levofloxacin- 50 disk per vial, linezolid- 50 disk per vial, meropenem- 50 disk per vial, minocycline- 50 disk per vial, teicoplanin- 50 disk per vial, novobiocin- 50 disk per vial, doripenem- 50 disk per vial, netilimicin- 50 disk per vial, oxacillin- 50 disk per vial, ofloxacin- 50 disk per vial, penicillin g- 50 disk per vial, piperacillin /tazobactam (100/10 mcg)- 50 disk per vial, streptomycin- 50 disk per vial, tetracycline - 50 disk per vial, tigecycline- 50 disk per vial, tobramycin- 50 disk per vial, vancomycin- 50 disk per vial, bacitracin- 50 disk per vial, ertapenem- 50 disk per vial, nalidixic acid- 50 disk per vial, pefloxacin- 50 disk per vial, brain heart infusion (bhi) broth - 500 mg, blood agar base (modified) - 500 mg, macconkey agar - 500 mg, nutrient agar, nutrient broth 500gm, mueller hinton agar 500gm, cled agar w/andrade indicator, sabauraud s dextrose agar 500gm, sabauraud s dextrose agar with chloramphenicol. (500 gm), corn meal agar (500 gm), bile esculine agar (bea) (500 gm), thiosulphate citrate bile salts sucrose agar (tcbs agar) (500 gm), peptone powder (500 gm), meat extract powder (500 gm), robertsons cooked meat medium (rcm) (500 gm), ph paper 5-10 ph, urease agar base (christensen) 500gm, simmon s citrate agar (500 gm), bile salt agar (500 gm), triple sugar iron agar (tsi) (500 gm), kovac s indole reagent (500 gm), oxidative fermentative (of) media 500 gm, autoclave sterilization paper/ strip (quality control), crystal violet, practical grade powder -100 gm, iodine resublimed powder - 500 gm, potassium iodide powder - 500gm, safranine o powder - 25 gm, absolute alcohol - 500 ml, ethyl alcohol 95%/rectified spirit 95.01 %v/v-450ml, normal saline - 500 ml, oxidase disc - 50 disks per vial, optochin - 50 disks per vial, watmann filter paper, cedar wood oil for microscopic - 25gm, distilled water 5 liter jar, sodium hypochlorite solution (5 liter jar), hydrogen peroxide 30% 500ml, formaline (5 liters) 40%, alcohol / propanol (2.5liter), paraffin wax (500gm) (58 -60 c), hematoxylin (125ml), spirit (500 ml), eosin (25

CTN :41074342

11 Aug, 2025 NA

Mumbai - Maharashtra

Tender For tender for supply of 24brsc004 spares of various types of ro plant d d - cartridge filter elements , pulsation damper 0 16 lts , diaphragm for pulsation damper 2 lts , motor 11 kw , processor control , 1250 mm long hose , 250 mm long hose , 325 mm long hose , 500 mm long hose , 630 mm long hose , 670 mm long hose , 575 mm long hose , 200 mm long hose , 450 mm long hose , 300 mm long hose , 720 mm long hose , flow switch , pulsation damper 2 lts , flow switch , pressure gauge 0 100 , pressure gauge 0 10 , sensor cable with electrode , seal ring cartridge filter housing , tee pvc push in fitting pu 9 , mcb 2a , sensor cable with electrode , motor for plunger pump 11kw 415v 50hz 3phase , 6 mm bolts for filter pump , casing , abs service kit , programmable logic controller version 2 , repair kit for pre filter pp , cartridge filter , cartridge filter assembly 20 , support gravel 1 5 3 0 mm , jubilee clips 00 13 mm to 20 mm , handle , dt module tool kit , membrane solution 44 , membrane cleaner 33 , pressure switch , flow meter , 825 mm long hose , 1000 mm long hose , 1650 mm long hose , cartridge filter complete , pressure transmitter , globe valve sampling cock pvc 1 4 bsp f , ss service kit , pulley for pump , taper bush for hp pump motor , valve kit for hp pump , manifold head , valve kit con 6 no 206535 206536 206537 206538 206539 206540 , spring washer , pressure ring p30 43 130 , seal retainer 2 pc , ceramic plunger , hp pump inlet manifold , coil spring 70 kg , anode plug zinc anode , crankcase casing , cartridge filter element , media for sand filter grade i , support gravel 2 0 3 0 mm , h p pump c case oil , ss jubilee clips 2x 45 mm to 60 mm , pu9 hose , lip seal dt module , o ring for head distributor assembly , high pressure hose module outlet , hp flexible hose , high pressure hose module outlet , brine r w hp flexible hose xl , product water flex hose fm manifold to plant , rubber hose 20mm , hp pump driving belt set , h p pump driving belt set of 2 , hp pump driving belt set , coupler for victaulic coupling 1 , belt spanner , high pressure pump for 01 02 tpd ro plant

CTN :41091800

24 Jul, 2025 9.73 Lacs

Multi City - Multi State

Tender For repair maintenance of filtration plant for amrit udyan at rashtrapati bhavan new delhisubwork/packages:replacement of filter media in filtration plant

CTN :40891735

22 Jul, 2025 4.68 Lacs

Kota - Rajasthan

Tender For corrigendum : supply of sand filter media for gravity filter beds installed at stage-i and ii water pretreatment plant, kstps, kota.

CTN :41067144

22 Jul, 2025 8.85 Crore

Patna - Bihar

Tender For mgsy/25-26/siwan-1 /01 - high level bridge across river on const. of rcc hl bridge with approach road over sona river between pakri makriyar to chhotka manjha in block - siwan sadar , rwd division siwan-1 , district - siwan , bihar, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity a) initial and routine load test, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity a) initial and routine load test, pile load test on single vertical pile in accordance with is:2911(part-iv) including dynamic load test for its integrity , length & capacity b) lateral load test, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diameter. all complete job as per specifications and direction of e/i., providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres(extra pile length). stripping off rcc m35 in the pile up to cut off level and disposal of debris with all leads and lifts., sand filling in foundation trenches as per drawing & technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m-30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design upto 5 m hieght, providing rcc m-30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design beyond 5 m and upto 10m hieght, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the fu

CTN :41082911

22 Jul, 2025 10.10 Crore

Patna - Bihar

Tender For mgsy/25-26/teghra/02 - construction of h.l rcc bridge ( 6 x 18.75 m) over river balan in between pwd road to mujahidpur ( maheshpur- gehuni ghat per balan nadi par pul ) under bhagwanpur block in the district of begusarai, excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., levelling course for pile cap , providing and laying of pcc m15 levelling course 100mm thick below the pile cap., providing and laying reinforced cement concrete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5 , rcc grade m -35 in pile cap, bored cast in situ piles r.c.c m-35 , pile excluding reinforcement complete as per drawing and technical specification and removal of excavated earth with all lift and lead up to 1200 m, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 54.273+16.411+74.929+ 29.651= 175.264, 6mm thick. steel liner as per drawing and technical specification ., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well. assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth @ rs. 3768.00 for each island., pile load test on single vertical pile in accordance with is:2911(part-iv) 1985, a) initial load test @ 2.5 times load on 1 pile, c) lateral load test, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf qty = 20.810+28.454+1.762+0.313+1.289+1.139 =53.77, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., furnishing and placing reinforced/prestressed cement concrete in super-structure as per drawing and technical specificatio,rcc grade m 30, height 5m to 10m, reinforeced cement concrete m30 grade approach slab including reinforcement and formwork complete as per drawing and technical specification, pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, construction of rcc railing of m30 grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as

CTN :41082914

22 Jul, 2025 4.44 Crore

Patna - Bihar

Tender For (nabard)/25-26/rajauli/01 - 1) name of work: construction of hl rcc bridge over khuri river in gram panchayat bakshanda, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diasmeter all complete job as per specifiactions and direction of e/l, providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of reinforced concrete pile head complete as per drawing and technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 .all complete job as per design upto 5 m height, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications. elastomeric bearing & pad, providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the full height compacted., providing rcc m 30 grade & super structure :--furnishing and placing reinforced/ prestressed cement concrete in super-structure as per drawing and technical specification beyond 5 m and upto 10m hieght (t beam slab), providing hysd bar in all types of rcc work:-- supplying, fitting and placing hysd bar reinforcement in super-structure complete as per drawing and technical specifications ., wearing coat :-- providing and laying cement concrete wearing coat m-30 grade including reinforcement complete as per drawing and technical specifications, providing rcc m30 grade in railing:-- construction of precast rcc railing of m30 grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications., providing drainage spout:-- drainage spouts complete as per drawing and technical specification, providing pcc m15 grade below approach slab:-- pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, providing pcc / rcc m30 in approach slab:-- reinforced cement concre

Positive Pressure Module Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government