Latest post box Tenders | Government post box Tenders

Central Government/Public Sector

CTN :45551269

30 Jun, 2026 NA

Nashik - Maharashtra

Tender For axle box complete without bearing (wag-9 & wap-7) conforming to clw specification no. clw/ms/3/003 alt.-5 and clw drg. no. 1209.01.111.005 alt-3, 1209.01.111.006 alt.-2 and 1209.01.111.007 alt-3. (note:-drg.no. 1209.01.111.005, 1209.01.111.006 & 1209.01.111.007 item ref.06, assembly paste supply will be malykote 1000 instead of klubber nb 50.) [ warranty period: 72 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45547055

01 Jul, 2026 NA

Nagpur - Maharashtra

Tender For supply of electric point machine rotary locking type, high thrust 220 mm throw,ac immunity 160 v ac,non trailable to operate on 110v dc completed with lock detector slides, cable termination box as per rdso specification no.irs: s: 24-2025 rev 3.0 or latest amendment. 1.the point machine and ground connections are as per drawing no. mentioned in rdso's letter no. sts/e/pm/220 mm vol-1 dated 23.5 2019. ground connection shall be as per rdso drawing no. rdso/s-3454 alt.-a consisting of (i) 1 in 8.5 turn outs bg 60 kg on prestressed concrete sleepers fitted with irs point machine ( 220 mm throw) for independent switch locking and clamp point lock (160 mm throw of point) with p bracket as per drawing no. rdso/s- 3454 alt.-a (ii) facing point bg switch extension bracket/insulation plate left hand and right hand as per drawing no. rdso/s-3591-3592-3593 (iii) facing point bg detector rod far end/near end as per drawing no.rdso/s-3594-95 (iv) facing point bg lock rod far end /near end as per drawing no. rdso/s-3596-97 (v) detector rod lug and lock rod lug as per drawing no. rdso/s-3598 (vi) special ms plate for s&t fittings on psc sleepers as per drawing no. rdso/t-3901 (vii) clamp type lock 60kg (tws)-bg-bolt special head as per drawing no. rdso/s/3599 alteration if any are applicable. one set of tools in a suitable tool box shall be supplied along with every 5 nos. of point machines consisting of (i) m6/m8/m18/m22/m20 box spanners (ii) m10/12 spanners (iii) adjustable wrench (iv) screw driver 300 mm long. 1:8.5 turnout. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

Central Government/Public Sector

CTN :45540958

22 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of others - scrap miscellaneousllaneousllaneous items ms (1)lot no-0204202627,misc. ms scrap like cut parts of wagon, spring, side bearer top, bell crank, cbc lock, pu pad, door channel, support & wear plate, cpb, o/handle, hand wheel, gear box, side bearer plate, nut bolt, door check sp0ring, brake beam, rod, sab, sf key, knuckle, pin, chamber, adaptor, yoke, yoke pin, striker casting horizontal lever, front follower, etc., 10.00mt,location-e/side of ra-rd shed/wcc/ddu (2)lot no-0204202628, miscellaneousllaneousllaneous ms scrap like cut parts of wagon, spring, side bearer top, bell crank, cbc lock, pu pad, door channel, support & wear plate, cpb, o/handle, hand wheel, gear box, side bearer plate, nut bolt, door check sp0ring, brake beam, rod, sab, sf key, knuckle, pin, chamber, adaptor, yoke, yoke pin, striker casting horizontal lever, front follower, etc., 20.00mt,location-n/side of machine shed/wcc/ddu (3)lot no-0204202629, miscellaneousllaneousllaneous ms scrap like cut parts of wagon, spring, side bearer top, bell crank, cbc lock, pu pad, door channel, support & wear plate, cpb, o/handle, hand wheel, gear box, side bearer plate, nut bolt, door check sp0ring, brake beam, rod, sab, sf key, knuckle, pin, chamber, adaptor, yoke, yoke pin, striker casting horizontal lever, front follower, etc., 10.00mt,location-n/side l. no.-12/wcc/ddu

Central Government/Public Sector

CTN :45549455

03 Jul, 2026 NA

Palakkad - Kerala

Tender For cting for and on behalf of the president of india invites e-tenders against tender no j-sg-ot-12-2026-662346 closing date/time 03/07/2026 15:00 hrs. bidders will be able to submit their original/revised bids upto closingdate and time only. manual o ers are not allowed against this tender, and any such manual o er received shall beignored.1. nit headername of workaugmentation of block working arrangements by provision of solid state blockinstruments in lieu of existing fm block instruments in poy-cnv and vnb-nilsingle line block sections of palakkad division, along with associated eialterations and other signalling works at poy and cnv stations.bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime03/07/2026 15:00date time of uploadingtender11/06/2026 18:42pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 14469883.92tendering section signalpgtbidding style[ decision at schedulelevel ]bidding unitearnest money (rs.) 289400.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 12 monthscontract type works - general contract category expenditurebidding start date 19/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-sor items1276856.85above/below/par1021330 140.00 per unit 285.86 40020.40 44.04 57645.38description:- wiring of relay inputs to wago block and wago block to datalogger. necessarywagos required is included as per schedule2021340 20.00numbers 285.86 5717.20 44.04 8235.05description:- wiring of analog voltages from ips room to datalogger. necessary wagos required isincluded as per schedule3031040 4.00numbers28118.51 112474.04 44.04 162007.61description:- supply and provision of earthing as per rdso speci cation rdso/spn/197/2008 orlatest (as per technical specification enclosed)4051160 1000.00 metre 301.05 301050.00 44.04 433632.42description:- supply of underground jelly lled 6 quad, 0.9mm dia as per spec irs:tc 30-05 withamd 5 or latest5051300 4.00numbers3962.00 15848.00 44.04 22827.46description:- supply and xing of 20 pair krone module housed in ms box and termination optical fiber cableables6051320 4.00numbers4761.16 19044.64 44.04 27431.90description:- supply and fixing of 20 pair ct box and termination of cables7051410 20.00numbers 262.65 5253.00 44.04 7566.42description:- supply of rcc cable markers (supply of rcc cable markers as per drawingno.cste/cn/ofc/1. the lettering on the cable marker shall be "sig" / "tele" / "ofc" as per theinstructions of railway representative at site.) as per drawing enclosed8051440 500.00 metre 64.10 32050.00 44.04 46164.82page 1 of 9run date/time: 11/06/2026 18:43:47palakkad division-s and t/southern rlytender documenttender no: j-sg-ot-12-2026-662346closing date/time: 03/07/2026 15:008description:- excavation of cable trench in all kinds of soil except hard rocky areas includingclearing of roots of trees, rocks, bushes etc. to a depth of 1.0 mtrs and to a width of 0.3 mtrs. (layingof cables is not included in this schedule)9051490 150.00 metre 314.41 47161.50 44.04 67931.42description:- removing/breaking of existing rcc slabs on the passenger platform, trenching to adepth of 0.6m to accommodate the additional cables, replacing the slabs removed after the cablesare laid and replastering with cement mortar, re lling the trench by ramming and consolidating it asper the instructions of railway representatives at site. (laying of cables is not included in thisschedule).10051520 36.00 metre 385.45 13876.20 44.04 19987.28description:- excavation of trench to a depth of 1 mtr. for track crossing of cables, re lling oftrench by ramming and consolidating it as per the instructions of railway representative at site afterlaying of dwc/rcc pipes. during

corporations/Associations/Others

CTN :45538979

02 Jul, 2026 NA

Ernakulam - Kerala

Tender For auction sale of used qr tickets,carton box,metal turning chips,aluminium cable,ms miscellenous items,revolving chair,copper cable- 95 sqmm 33 kv,copper cable - 240 sqmm 33 kv,plastic can,w-beam crash barriers,gi channel,lead acid battery,tube-light and fittings,e-waste,defective electric platform truck

corporations/Associations/Others

CTN :45538877

17 Jun, 2026 NA

Ludhiana - Punjab

Tender For auction sale of ct/pt units,ms iron scrap etc.,aluminium scrap etc.,governor and electro hydraulic etc.,u/s rubber tube off size etc.,dc excitor rotor poles etc.,empty steel drum 210 ltr. etc.,half x-arm,pcc broken poles off size,drill/chucks etc.,11kv pilca o/d cable box 95 mm (1/core) etc.

State Government

CTN :45520196

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33kv rewan bay with supply of material, integration and remote gateway work at 220kv ss bangra under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45520197

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33 kv birdha bay with supply of material, integration and remote gateway work at 220kv ss birdha under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

Co-operative

CTN :45511919

22 Jun, 2026 1.83 Lacs

Gurgaon - Haryana

Tender For supply of hardware items for manesar plant - ms box (square pipe):50x50x5mm, angle m.s. 50*50*6, flat,ms,50mm,5mm,is-2062, chain link fencing

Post Box Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors