Latest powder coat Tenders | Government powder coat Tenders

Central Government/Public Sector

CTN :42126799

27 Oct, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of switch plate assembly complete with polycarbonate cover frame and powder coated steel plate with 04 nos. on-off switches & 01 no. 3 pin socket 6a ,250v ac with 02 nos. 1.0 amp glass fuses with fuse holders conf. rcf specification no. edml-086, rev.-8 & drg. no. cc 74247, alt.-g,item-2 suitable for sleeper (scn) non-ac coaches.

State Government

CTN :42055842

06 Oct, 2025 18.10 Lacs

Malappuram - Kerala

Tender For deposit work tirurangadi municipality -supply and fixing of 400 amps powder coated panel board (swg 16mm) with 2 nos copper plate earthing and 250 amps mccb floor mounted panel borad etc at raw water pumphouse and 7.0 mld wtp at kallakayam

Central Government/Public Sector

CTN :42126935

08 Oct, 2025 NA

Mumbai - Maharashtra

Tender For supply of repair and maintenance paint synthetic enamel, ex-terior,

Central Government/Public Sector

CTN :42123279

13 Oct, 2025 NA

Porbandar - Gujarat

Tender For tender for supply of supply of lp of paints and consumable naval store items against nac d d - paint1 , paint2 , paint3 , paint4 , paint5 , paint6 , paint7 , paint8 , paint9 , paint10 , paint11 , paint12 , paint13 , paint14 , cns1 , cns2 , cns3 , cns4 , cns5 , cns6 , cns7 , cns8 , cns9 , cns10 , cns11 , cns12 , cns13 , cns14 , cns15 , cns16 , cns17 , cns18 , cns19 , cns20 , cns21 , cns22 , cns23 , cns24 , cns25 - paint red oxide , paint navy blue , paint green , paint golden yellow , paint fluorescent yellow , paint terracotta red , paint silver , paint fluorescent red , paint fluorescent green , paint rfu finishing exterior synthetic dark grey , paint azure blue , paint white enamel , paint signal red , paint black enamel , envelope cloth coated 9x12 , envelope size 10x14 , envelope size 6x12 , envelope size 4x10 , urinal screen mat , mosquito repellent machine with liquid , napthalene , refill for automatic air freshener 250 ml , hand wash liquid , battery dry 1.5 v size small , polythene film length 12x18x0.0007 , jerry cans 20 ltrs , can plastics 10 ltrs , varnish , bag gunny 27x21 , m seal , candle was dia 19mm , plastic mug , soap liquid toilet , rat sticking gel , distilled water , blue laundry , dust bin with cover , detergent powder , refills for ship head

State Government

CTN :42061405

06 Oct, 2025 NA

Ernakulam - Kerala

Tender For purchases for open gymnasium - purchase of items for open gym, air walker,pipe make:- jindal / tata,combination equipment made up of b class gi pipe of different nb. nb stands for nominal bore size i.e. internal diameter of pipe in millimeters.100mm nb:- main frame. 80mm nb:- standing twister support. 32mm nb:- air walker pedal, leg press seat, standing twister base, support. 25mm nb:- leg press footrest support, air walker handle, standing twister handle.c channel of 38 x 73 x 4.5mm:- bottom support frame.ms plate of 8mm:- leg press profile, air walker pedal l-bend. 60mm seamless pipe:- bushes. 70mm seamless pipe:- bushes. ms sheet of size 330 x 300 x 1.8mm:- seat and backrest. ms plate of 245 x 113 x 2.8mm:- footrest support. ms round plate of 298 x 9mm:- standing twister plate. hdpe / ppcp plastic:- closing caps, leg press footrest. ms bright material:- pins made of 35mm, 25mm. bearings:- permanent lubricated bearings 6007 , 6205 of reputed brand are used. bearings end cap:- made up from nylon material. stopper:- stopper (bushes) used are made from poly urethin material of 50mm. nut & bolts:- high tensile steel with galvanised nut & bolts are used. circlips:- the circlips are used for locking is made up of a34, a24 & a16. powder coating:- the powder coating done with pure polyster powder of ackzonoble or berger with 60 to 70 micron thickness., chest press, length:- 1550mm, width:- 710mm, height:- 2150mm, safe area:- 3.0 mtr x 1.7 mtr, chest press equipment made up of b class gi pipe of different nb. nb stands for nominal bore size i.e.internal diameter of pipe in millimeters. 100mm nb:- centre pipe. 80mm nb:- foundation main pipe. 32mm nb:- handle frame duly bend, seat frame duly bend, support. 25mm nb:- connecting links, handle. ms angle 23 x 23 x 1.8mm:- foundation support frame. ms pipe 19 x 38 x 1.8mm:- foundation support frame. 50mm seamless pipe:- bushes. 60mm seamless pipe:- bushes. ms sheet of size 330 x 300 x 1.8mm:- seat and backrest. hdpe / ppcp plastic:- closing caps, base cover. ms bright material:- pins made of dia.25mm & dia.17mm. bearings:- permanent lubricated bearings 6205 & 6203 of reputed brand are used. bearings end cap:- made up from nylon material. nut & bolts:- high tensile steel with galvanized nut & bolts are used. circlips:- the circlips are used for locking is made up of a24 & a16. handle grips:- handle grips are made up of high quality rubber material. powder coating:- the powder coating done with pure polyster powder of ackzonoble or berger with 60 to 70 micron thickness., double standing twister,length:- 1800mm, width:- 540mm, height:- 1430mm, safe area:- 3.0 mtr x 1.0 mtr, seating & standing twister equipment made up of b class gi pipe of different nb.nb stands for nominal bore size i.e. internal diameter of pipe in millimeters. 100mm nb:- centre pipe. 80mm nb:- standing twister plate support, foundation main pipe. 50mm nb:- seating twister plate support. 32mm nb:- bottom frame, support. 25mm nb:- handle frame ring, foot resting frame. dia. 125mm od with 5mm thickness:- handle sleeve pipe. ms angle 23 x 23 x 1.8mm:- foundation support frame. ms pipe 19 x 38 x 1.8mm:- foundation support frame. ms round plate of 298 x 9mm:- twister plate. 70mm seamless pipe:- bushes. ms flat 38 x 9mm:- bottom frame. hdpe / ppcp plastic:- closing caps. ms bright material:- pins made of dia.45mm & dia.35mm. bearings:- permanent lubricated bearings 30206 , 6205 & 6007 of reputed brand are used. nut & bolts:- high tensile steel with galvanized nut & bolts are used. handle grips:- handle grips are made up of high quality rubber material. powder coating:- the powder coating done with pure polyster powder of ackzonobleor berger with 60 to 70 micron thickness., leg press, length:- 1700mm, width:- 380mm, height:- 1550mm, safe area:- 2.8 mtr x 1.4 mtr, leg press made up of b class gi pipe of different nb. nb stands for nominal,bore size i.e. internal diameter of pipe in

Central Government/Public Sector

CTN :42119724

11 Oct, 2025 NA

Raigad - Maharashtra

Tender For supply of lp of paints c c - paint red oxide , paint green , paint dark grey , paint signal red , paint navy blue , paint golden yellow , paint fluorescent yellow , paint fluorescent red , paint fluorescent green , paint black enamel , paint white enamel , paint terracotta red , paint silver , paint remover non-inflammable

Central Government/Public Sector

CTN :41797228

06 Oct, 2025 5.84 Lacs

Mumbai - Maharashtra

Tender For bid to ras corrigendum : supply of dry chemical powder , broom country , flag national size 7 , flag cg ensign size 4 240 x 120 cm , flag cg ensign size 7 ib acv 30 x 15 cm , paint roller refill 4 inch , white spirit , turpentine oil , paint roller 6 inch , grease lg 200 , feather broom phool jhadu , abrasive cleaning pad or scrubber pad , super mop refills , polish metal brass , duster cloth , cloth sponge , cleaner white toilet or harpic , cotton waste , cloth stocknite or mutton cloth , brush sweeping hand , cleaning liquid for utensils , cleaning bar for utensils 500 gms , disinfectant fluid white or black phenol , rags cotton coloured , hand towel , steel cleaning liquid , spin mop set , wiper long handle , brush with handle , scrubber with handle , hand wash liquid , glass cleaner 500 ml , plastic mug , detergent powder , room freshener , pest seal , dust bin , bag biodegradable for garbage , deodoriser refill 8 cm x 3 cm , soap liquid toilet , refill for automatic air freshener 250 ml , rat sticking gel , naphthalene balls , mosquito repellent machine , spray hand liquid insecticide , ncml solution teepol , ncml solution phosphoric acid , ncml solution oxalic acid , ncml solution thiourea , distilled water , brown sheet laminated , distemper white isi mark , paint brush 4 inch , paint brush 2 inch , fiber dust brush , paint roller 4 inch , paint roller 7 inch , clip jubilee 3 inch , paint roller 9 inch , photocopier paper 215 mm x 342 mm full scap , dvd , xerox paper sizes 210 x 297 x mm a4 80 gsm , envelope cloth coated 12 x 16 , envelope cloth coated 10 x 14 , envelope size 10 x 14 , envelope size 6 x 12 , envelope size 4 x 10 , tape transparent 2 inch , toilet paper , m seal or equivalent , candle wax , xerox paper 80 gsm 420x297 mm a3 , paper napkin , 5 minute steel putty sf or quick dry steel putty , wet surface repair putty , pencil battery dry 1.5 v r6 , safety gloves , teflon tape , wonder tape 2 , bag gunny 27 x 21 , synthetic foot mat 3 x 2 feet , paint black heat resistant , paint black enamel , paint azure blue , paint aluminium heat resistant , epoxy red oxide primer , varnish , grease lg 280 , aquabond putty , paint green , paint white interthane 990 light grey , paint dark grey , paint navy blue , paint golden yellow , paint fluorescent yellow , paint fluorescent red , paint fluorescent green , paint epoxy aluminium primer , paint priming coal tar epoxy black , paint rfu priming red lead , paint yellow zinc chromate , paint white enamel , paint red oxide , thinner general purpose , paint silver , paint signal red , paint olive green primer , cable casing , wire connection lugs , cable electric 2 core cu wire flexible //bid details 2 / 81

Central Government/Public Sector

CTN :41799867

10 Oct, 2025 NA

Raigad - Maharashtra

Tender For corrigendum : tender for supply of crc 2-26, 300 gms self spraying aerosal for elec maintainence., nexus (germany) make, two leg puller model no. 100-1.5,, dia. 25-130mm, leg: 100mm, torque: 80nm, spindle measurements:, m14 x 1.5 x 130., residual current circuit breaker [rccb], 63a 440v rating, three phase and nuetral, sensitivity 100 milliamp trip free mechanism, touch proof terminals ip20, resistance against unwanted tripping, conforming to relevant iec/bis standard, make: siemens/l and t/ legrand/havells/ge/abb/ schneider., plug top suitable for 16 amp. flameproof. weatherproof switch socket, 3 pin (2p+1e), in lm6 (cast a1) construction for single phase switch so cket. cat.no.ss/oa/1011, make: sudhir switchgear for urea plant., black ink ribbon part no lm ir508 for ferrule printing machine model lm-550a2/pc, make max co ltd. japan, reversible 2 way screw driver, magnetic hex shank, size: 6 inch, head type: one side flat/ slotted head and one side, phillips head, holder material: plastic, blade material: steel, make: taparia 905 h/jhalani/equivalent, industrial metal clad ap20 plug top 20 amp., 250 volts, cast aluminium 3 pin, crompton make, industrial metal clad ap10 plug top 10 amp 250 volts, cast aluminium 3 pin, crompton make, battery flat 9 volt of make duracell/energizer, insulation tape type p 101 frlt tape, size: 1.9 cm x 20me roll, fire retardant type, breake down voltage 2kv make permacel., battery pencil cell 1.5 volt heavy duty everedy model no.: 1015 r6/aa/um3 guaranted upto 0.6cv eveready make, battery cell 1.5volt, make: novino national neo type-r03 nt aaa, masonary (concrete) drill bit straight shank size: 4mm., masonary (concrete) drill bit straight shank size 6mm., masonary(concrete) drill bit straight shank, size: bmm, masonary (concrete) drill bit straight shank, size: 10mm, box spanner set-24 piece socket wrench set: 1/2" square, drive set-consisting of: 1-250 reversible ratchet handle, 1-250 slidin gt-bar, 1- universal joint, 1-420 mm speeder handle, 2 extension, box spanner set gadre or equivalent reputed make containing complete set of box spanner sockets, rachets, handles and other adoptors size: 6 mm to36 mm., ink ribbon case part no lm-rc500 for ferrule printing machine model lm-550a2/pc,make max co ltd. japan, heating element zero bend type. rating-2kw, 230vac, 50hz., mocnickel chromium steel complete with 1/2" bsp fixing nut. length 1350mm, suitable for surface load 3.2/cm2. as per attached drawing., motor fan for 0.75kw, 1500 rpm, 805 frame motor., coating: the fan shall be powder coated, cooling fan moc-ms., sheet thickness shall be minimum 3 mm., motor fan for 30hp (22kw)/1500 rpm 180 1 frame motor, motor fan for 75 kw, 1500 rpm (motor of ie2 class) 280 m & 280 s motors, motor fan for 75 kw, 3000 rpm, 280 s & 280 m frame size motor, motor fan for 3.7 kw,3000 rpm, motor of iez class) 132 s frame motors, moc: cast iron, motor fan for 60hp (45kw)/3000 rpm 225 s frame motor, motor fan cover for 7.5 kw, 1500 rpm, 132 m frame size motor (motor of ie2 class), moc: ms

State Government

CTN :42142318

13 Oct, 2025 NA

Multi City - Multi State

Tender For supply of ready mixed paint, air drying, red oxide - zinc phosphate, priming as per is 12744,thinner for epoxy paints (bhel),enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932,enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932,enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932

Corporations And Associations And Others

CTN :42137828

10 Oct, 2025 3.80 Lacs

Delhi - Delhi

Tender For painting work of rcc benches, park railings and security gates by providing synthetic enamel paint etc. in ward no. 51, rohini, m-i/rz.

Powder Coat Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors