Latest power transformer sale Tenders | Government power transformer sale Tenders

State Government

CTN :42772042

20 Nov, 2025 NA

Dharamshala - Himachal Pradesh

Tender For tender for replacement of damaged ct pt unit of 1x 630kva 1x250kva substation of ropeway in kotwali section under electrical sub-division no i, hpsebl, dharamshala.

State Government

CTN :42681818

26 Nov, 2025 NA

Bilaspur - Chhattisgarh

Tender For corrigendum : job work 132 kv testing of metering ct, protection ct & metering pt of m/s nachiketa power & steel pvt. ltd. at 132 kv s/s silphari under ee (s/s) dn. csptcl bilaspur.

corporations/Associations/Others

CTN :42780443

21 Nov, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For for the work of replacement of burnt/damaged pole mounted combined ct/pt units installed at different locations in area of electricity test division-i, gorakhpur

CTN :42757779

24 Nov, 2025 NA

Ernakulam - Kerala

Tender For supply of indoor : :--11kv indoor resin cast type ct , ttb test terminal block for tod meter , 4 sqr mm flexible cu wire for metering , cable tye 300mm mm one packet fuse with carrier 20a 4 no cataridge type fuse 2a 4 4nos nut bolt washers 1kg , fixing of new indoor ct pt ht tod meter with appropriate modifications on 11 kv iit lbsm panel , transportation factory to the testing laboratory tmr angamaly after testing then to the site , indoor cts cts have a ratio 15 5a 2s class 10va test charge

CTN :42601673

19 Nov, 2025 20.58 Lacs

Awantipora - Jammu And Kashmir

Tender For creation of 250 kva 11 0.433 kv transformer alongwith ht lt network for providing of power supply to solid waste management plant at mc khrew including installation of 11 kv ht tri-vector meter ct and pt operated

State Government

CTN :42059883

20 Nov, 2025 4.85 Lacs

Gorakhpur - Uttar Pradesh

Tender For corrigendum : procurement of various type of coil for 36 kv vcb, terminal connector for 245 kv , 145 kv and 33 kv ct, pt, cb, la, pi , different type of pg clamps , earthing discharge rod and 150 watt led outdoor flood light for routine maintenance at 220 kv s/s h

State Government

CTN :41817564

20 Nov, 2025 1.83 Lacs

Srinagar - Jammu And Kashmir

Tender For corrigendum : replacement of damaged 33kv, 3-phase, 50hz outdoor type onan cooled ct-pt combined metering unit along with other allied works at wss tangnar stage 2nd

corporations/Associations/Others

CTN :42715127

25 Nov, 2025 NA

Natham - Tamil Nadu

Tender For supply, fabrication, erection of gi steel structures, earthing, materials, etc., for introduction of 110/33kv ratio at natham 110kv ss - steels: supply of steel items as per tneb specification including cost of materials loading transporting unloading and delivery at site complete, 200 x 100 rs joist, 125 x 65 mm m.s.channel, 100 x 50 mm m.s.channel, 65 x 65 x 6 mm m.s.angle, 50 x 50 x 6 mm m.s.angle, 40 mm m.s.round rod, 65 x 10 mm m.s.flat, 50 x 8 m.s.flat, 6mm chequered, labour charges for hot dip galvanising of mild steel materials including transport, lead, lift, etc., complete wherever required as directed by the field engineer., labour, machinery consumables for the fabrication for steels structures, heavy section (14kg/m and above), light section (below 14 kg/m), labour for the erection of the fabricated steels structures, heavy section (14kg/m and above), light section (below 14kg/m), labour, machinery, consumables for fabrication, erection of earthmat, earth connection, earth electrode, earthspike (including sharpening of earth spike) as directed by the field engineer., labour for excavating and refilling of earth/ trench for earthmat, cable, etc., of any size/ depth narrow excavation as directed by the field engineer. normal clay/ hard gravel soil, providing earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth pits with supply and providing of bentonite powder (sodium bentonite) 5kg/ mtr depth of the bore mixed with low resistivity earths as directed by the field engineer (earth to be supplied by the contractor), labour charges for providing grouting pocket placing grouting bolt by template for breaker 110kv c.t/ pt structure foundation, supply & labour charges for two coats of enamel painting in any substation structures, steels, etc and wherever required including the cost of reputed make paints and other consumables as directed by the field engineer., labour charges for writing details in any finished surface/ board including cost of enamel paints and other consumables as directed by the field engineer., labour for the erection breaker using crane arranged by the contractor including the cost of gada cloth taflan tape and other consumables including support structure providing holes gas filling wherever necessary as directed by the field engineer., 110kv sf6 breaker, 33/22/11kv vcb, labour for erection of measurement transformers reactor units using crane arranged by the contractor including providing holes wherever required as directed by the field engineer, 33/22/11kv ct & pt, 110kv ct & pt, labour for erection of isolators with proper allingments including accessories, meggering and cost of consumables and lubricants and as directed by the field engineer., 110kv isolators w/o earth - hand operated, 33/22/11kv isolator, las: labour for erection of las station/ distribution type single unit including monitor from the acesssories, 110kv las with surge monitors, 33/22/11kv las, labour for the erection of strung bus and all related hardwares, fittings, clamps including meggering, hoisting of insulators, and consumables and as directed by the field engineer., 110kv single conductor strung bus/phase, upto 33/11kv single conductor strung bus/ phase, labour for the erection of insulator single pole stack for supports uprights/ underhang including meggering & other consumables and as directed by the field engineer. 110 kv, labour for the erection of busbar including suitable modifications of end clamps, providing holes wherever necessary as directed by the field engineer., 75 mm (1 length), 75 mm (with bend), 50 mm (1 length), labour for the erection of jumper/ droppers using moose/ zebra/ panther conductors including modification of end clamps, providing holes etc wherever necessary as directed by the field engineer., labour for erection of battery set incl

corporations/Associations/Others

CTN :42721109

26 Nov, 2025 2.21 Crore

Tiruchirappalli - Tamil Nadu

Tender For manufacture, fabrication, supply,erection, testing and commissioning with 1x8 mva pr.tr,stn transformer, associated equipments, accessories, control panels, control room and electrical works at o.krishnapuram in trichy metro under tkc thro e tener - electrical material supply, power transformer 33/11kv, 8mva power transformer with oltc, breaker along with ct for outdoor ss 33 kv (gc) vcb (out door) 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (600-300/1-1a) with structure and complete accessories with breaker platform., 11kv (lv) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulatedwith permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (1200-600/1-1a) with structure and complete accessories with breaker platform., 11kv (feeder) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (400-200/1-1a) with structure and complete accessories with breaker platform., potential transformer 33kv potential transformer with tc (single phase unit), 11kv potential transformer with tc (three phase unit), panels ac panel for 33kv ss, 110 v dc annunciation panel type b, 110v dc indoor c&r panel for gc breaker, 110v dc indoor c&r panel for lv breaker, 110 v dc indoor c&r panel for twin feeder, control cables, junction box and accessories 14c x 2.5 sq.mm copper cable armoured, 8c x 4 sq.mm copper cable armoured, 4c x 4 sq.mm copper cable armoured, 4c x 2.5 sq.mm copper cable armoured, 2c x 2.5 sq.mm copper cable armoured, isi mark 19 / 22 mm cable gland as directed by the field engineer., isi mark 25 mm cable gland as directed by the field engineer., isi mark cable 28 mm gland as directed by the field engineer., lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination, supply of gi chequerred plate 6mm thickness, junction box supply of ct/pt junction box made out of 14swg (2mm) m.s.sheet wherever required as directed by the field engineer. the box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials. 400w x 300h x 150d, supply of ac junction box of size 535x310x127mm of 18swg ms sheet including hrc fuse unit-18 nos. should be fitted with base, consumables etc. (the box shall be vermin proof, shall have sturdy hinges and locking arrangements), supply of mounting channel suitable for cbtm 5 terminal block in panel /box as required and as directed by the field engineer., supply of disconnected type terminal block suitable for ct circuits in panels/ box as required & as directed by the field engineer, supply of isi mark bakelite hrc fuse holder with fuse of 2/5/10/16 amps reputed make in panels/ boxes for ac/dc/pt circuits wherever required as directed by the field engineer. 16 amps - fuse holder with hrc fuse, 63amps - fuse holder with hrc fuse, bus & bus materials zebra acsr conductor, 2.0" / 50 mm aluminium bus bar (thickness:5 mm), 22/33 kv pt insulators, 11kv pt insulator, 11kv, 120kn disc insulators (antifog), strung bus eye bolt of 18 - 20 mm dia gi rod of required length suitable for 33kv, 22kv and 11kv strung bus including cost of gi rod and 2nos gi nuts & washer as directed by the field engineer., clamps and connectors tension fitting clamp 4 bolted for zebra, t clamp for 2" bus to single zebra, t clamp for zebra to zebra, switchend clamp for single zebra, switchend clamp for 2" busbar, reducer clamp for 2" bus to zebra, pg clamp for zebra, free end clamp for 2"busbar, corana bell for 50mm bus bar, switch end clamp for mink, seating block for 2" bus bar(for giving elect co

corporations/Associations/Others

CTN :42723587

24 Nov, 2025 80.0 Thousand

Chennai - Tamil Nadu

Tender For supply & fabrication of structure materials, supply of ms flat, ms rod, erection of structure, earth bore, earth mat, earth raiser, erection of 110 kv breakers, ct, pt, ab switches, providing droppers, jumpers, laying of cables & end terminations and supply of station auxiliaries & etc., for erection of new 110 kv thirunindravur feeder- ii from alamathy 400 kv ss in thirunindravur 110 kv ss.

Power Transformer Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors