Latest power capacitor bank Tenders | Government power capacitor bank Tenders

Central Government/Public Sector

CTN :45556819

26 Jun, 2026 NA

Hubli - Karnataka

Tender For supply of 25 kvar power capacitor bank mpp heavy duty (box type) - 440v, 3 phase, 50 hz as per is no. 13340. makes/brands: schneider/legrand/c&s/l&t/abb/neptune power/havells/epcos only. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45370027

23 Jun, 2026 33.14 Lacs

Bengaluru - Karnataka

Tender For corrigendum : replacement of age old 66kv pneumatic circuit breaker and c&r panel of 66kv capacitor bank at 220kv r/s hoody. pertaining to tr (op) circle-south, bengaluru on total turnkey basis including supply of all matching materials/equipment including supply of 66kv breakers and erection (including civil works) of all materials/ equipment, testing and commissioning- on percentage basis

CTN :45508909

25 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For supply of apfc capacitor bank panel - supply, instalation and commissioning of apfc capacitor bank panel with apfc relay with automating load control panel of 1250 kvr trail testing of apfc panel and outgoing supply of feeder will be connection and load trial. as per bellow detail specification make- l & t details of fabrication of panel cubical- free standing floor mounted with ismc chanel base 100x50x5mm front oprated indoor type ip44, powder coated, color-siemens gray ral-7035)hardwae, gasket,door lock, wiring, ferul etc sheet 2.2/1.6mmmm crca. note - 1-1- panel will be ms fabricated and powder coated as per industry standard, 2-all wires will be used fire proof standard. 3-the paneles muist be of iec/nec standards.4- all type of modification of old bus duct as per requiredment of sit.5- panel coolling axial fan 8inch/panel illumination lamps/thermo stat-30-90 degree.6-apfc relay microprossessor based-16 stage.7-acb used mdo 1.5g microprossessor based release uv., supply, instalation and commissioning with all bolts ,angle and supporting tool & takel with hardware as per requirerment of new aluminium bus bar grade- e91e with ducting, cap. 2,500 amp + 0.8 pf. all necessary conection will be done. make: hendalco

State Government

CTN :45315676

29 Jun, 2026 13.77 Crore

Bengaluru - Karnataka

Tender For corrigendum : establishing 2x12.5 mva, 66/11kv sub-station at kalathmadu along with construction of proposed 66kv lilo line from the existing 66kv virajapete- ponnampete sc line on dc towers to proposed 66/11kv sub station at kalathmadu for a distance of 1.925km in virajpete taluk, kodagu district on partial turnkey basis including supply of all matching materials/equipments (excluding supply of 2x12.5mva 66/11kv power transformers and 11 kv switchgear) and erection (including civil works) of all materials/equipments, testing and commissioning - on load tap changer , control and relay panels, , circuit breakers, , 11kv mcvcbs & pcvcbs, , tower parts and all types of station structures with bolts, nuts and washers, , i beams & m.s channels, , lightning arrestors, , isolators, , insulators, , instrument transformers, , battery sets, , battery charger, , acsr conductors, , ground wire, , 11kv ug cable, , 1.1kv copper control cables & lt power cables, , capacitor bank, , hardware for insulator, conductor and ground wire:, , tension & suspension clamps and connectors., , accessories for conductor and ground wire:, , p.g clamps. m.s.c joints, pre-formed rods, repair sleeves, vibration damper etc., , c-type fire wedge connectors, , i) grounding materials (g.i flat, m.s flat etc.,), , il)grounding materials (c.i pipes), , ltac & dcdb panel, , 11kv termination & jointing kits, , class, , nitrogen injection fire protection, , system, , rigid tubular aluminium bus bars, aluminium clamps and connectors., , wave traps/line traps, , plcc equipment

CTN :45176246

12 Jun, 2026 NA

Hyderabad - Telangana

Tender For bid to ras supply of teensy 4.1 micb3 c40 , mems microphones sph0655lm4h- 1 , raspberry pi 5 8 gb ram , lora sx 1276 and 1278 module , nuts, bolts and l angle different varieties , connecting wires and cables varieties , gps modules with pps output , power bank 10000ma 5v dc , enclosures for teensy, lora, microphone assemblies , micro sd cards 32 gb, class 10 , regulated power supply 12v dc to dc , tripods for sensor nodes , cable and connectors , nema 17 59 n-cm stepper motors bipolar , tmc2208 stepper motor drivers , mini protoboard with screw terminals , 100 uf capacitor 35v , 22 awg wire , 5v regulator , 8.4 inch 4 wire resistive touch panel , 30 v bench power supply , 1 inch steel bearing ball , 22 mm long m3 tie rod , m3 x 6 mm threaded inserts , m3 x 5 mm standoffs , m3 x 5 mm screws , m3 x 8 mm screws , m3 x 10 mm screws , m3 x 35 mm screws , m3 nylon locknuts , m4 x 20 mm screws , m4 x 25 mm screws , m4 nylon locknuts , pla filament , exacto knife , hot glue gun , primary dual payload release actuator , retrofitting carbon fiber cf structural tube , aerodynamic dummy bomblet , electronic trigger interface and wiring harnes , mounting bracket and fastener kit , primary dropping mechanism unit , retrofitting assembly straps , aerodynamic bomblet , 550 mah li hv battery pack , dual channel li hv charger , primary mmhg payload release actuator , retrofitting base plate assembly , dummy mmhg practice bomblet , electronic trigger interface , mounting hardware and vibration dampeners ) /bid number : gem/2026/b/7476437 * /dated: 13-05-2026 & & / bid document 1 / 39

CTN :45446757

22 Jun, 2026 73.10 Lacs

Bhiwani - Haryana

Tender For estimate for supply, erection & commissioning of various electromechanical equipment like 5 no. 5 cs. vt pump, electric motors, starter panel and other allied material for flood protection works from the field area of village dang khurd & outfall at rd 65000-r of nigana feeder in lift w/s (m) division, bhiwani for the year 2026-27. - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type., supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.

State Government

CTN :45427478

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing & commissioning for sop to improvement of distribution system of various lwss in eletrical section silh under esd hpsebl majheen, ed jawalamukhi. - supply part of aug. 11/0.4 kv 100 to 250 kva distribution sub-station, cable 3.5 x 240 sq. mm, lt distribution panel box for 250 kva dtr, aluminium thimble 240 sq mm, capacitor bank 81 kvar for 250 kva dtr, danger plate, surge arrester, transformer bed (civil work), chain link fencing, angle iron, gate etc. for transformer fencing, chemical earth, aaac 7/4.26 sq. mm, chain pully 3 ton, supply part of ct-pt unit, ct pt combined unit (pt:11 kv/110 v ct: 200/5 a), 3-ph, 4-wire tri vector meter (pt - ratio -/110 v, pvc multistrand 2.5 sq mm copper wire, 1 inch dia gi pipe for concealing, bend joint/elbow, st pole 9 mtr long with base plate, muffs with concerete filling, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 4 nos], x-arm: [channel iron (75x40x4.8 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 1 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos, ms angle iron (50x50x6 mm), length : 2800 mm x 4 nos, ms angle iron (50x50x6 mm), length : 460 mm x 2 nos, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble, copper thimble, danger plate, barbed wire, aluminium paint., red oxide, erection part of aug. 11/0.4 kv 100 to 250 kva distribution sub-station, erection charges & transportation charges complete in all respect of aug. 11/0.4 kv 100 to 250 kva distribution sub-station, erection part of ct-pt unit, erection charges & transportation charges complete in all respect of ct-pt unit

Central Government / Public Sector

CTN :45238868

22 Jun, 2026 NA

Bongaigaon - Assam

Tender For corrigendum : supply of hv capacitor bank, 2600 kvar, 11kv(e) , hv capacitor bank, 2600 kvar, 11kv(e) with apfc panel , site supervision , training

CTN :45404153

09 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for electrical and electronics engineering department - supply of equipment forelectrical and electronics engineering departmen, loading rheostat 3 phase :specification :rating: 5.25 kw supply: 415 v ac, 3-phase, 50 hz total number of load steps: 6 main switch to be provided approximate dimensions: 18 18 22 inches (l b h) comprising special cement-insulated electrical load resistors mounted on powder-coated ms panel/enclosure individual on/off rotary switches for load selection mounted on rubber wheels/casters for portability suitable for laboratory load testing applications proper insulation, ventilation, and earthing arrangement to be provided , loading rheostat 1 phase :specification :type: single phase loading rheostat power rating: 5 kw supply: 230 v ac, single phase, 50 hz total number of load steps: 8 approximate dimensions: 18 18 22 inches (l b h) comprising electrical load resistors suitable for laboratory loading applications resistors shall be special cement-insulated type mounted on powder-coated ms panel/enclosure individual on/off rotary switches provided for load selection mounted on rubber wheels/casters for portability , single phase resistive load :specification :type: single phase loading rheostat power rating: 5 kw supply: 230 v ac, single phase, 50 hz total number of load steps: 8 approximate dimensions: 18 18 22 inches (l b h) comprising electrical load resistors suitable for laboratory loading applications resistors shall be special cement-insulated type mounted on powder-coated ms panel/enclosure individual on/off rotary switches provided for load selection mounted on rubber wheels/casters for portability , three phase capacitor bank :specification :3-phase capacitor bank rating: 2 kvar voltage: 440 v ac frequency: 50 hz heavy duty self-healing capacitor units powder coated ms enclosure compact panel mounted/floor mounted construction proper ventilation arrangement to be provided capacitor duty contactor/switch to be provided fuse/mcb protection to be provided discharge resistors to be provided for safety proper earthing arrangement provided , plc tranier kit:specification :plc make :allen-bradley / delta electronics / siemens orequivalentdigital inputs : 8 20 nos.digital outputs : 6 12 nos. (led / relay type indication)communication port : rs232 / usb / ethernet (if available)programming method : ladder logic programmingtoggle switches for digital input simulationled indicators for output status indicationanalog potentiometers for analog input experimentsproximity sensor interface providedrelay output interface providedinput supply : 230 v ac, 50 hzbuilt-in regulated 24 v dc power supplyladder diagram programming software to be providedcompatible programming software license to be providedsuitable for basic plc programming and automationexperiments

Central Government And Public Sector

CTN :45389582

22 Jun, 2026 NA

Lumding - Assam

Tender For comprehensive annual maintenance contract of control & relay panel incorporating numerical relays for 25 kv ac tss and shunt capacitor bank for 01 (one) no. of tss for a period of 05 (five) years.

Power Capacitor Bank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

Central Government / Public Sector

Central Government And Public Sector