Latest power conditioning machine Tenders | Government power conditioning machine Tenders

State Government

CTN :45178636

28 May, 2026 80.00 Lacs

Guna - Madhya Pradesh

Tender For rate contract for supply local purchase award for purchase of various electrical equipment/goods and safety appliances under jurisdiction of general manager (ondm) mpmkvvcl,guna - rate contract award for purchase of various electrical equipment/goods, trip coil shunt 30 volt dc suitable for 33 kv vcb make stelmec, trip coil shunt 30 volt dc suitable for 33 kv vcb make cgl, trip coil shunt 30 volt dc suitable for 11 kv vcb make shreem, trip coil shunt 30 volt dc suitable for 11 kv vcb make cgl, trip coil shunt 30 volt dc suitable for 11 kv vcb make - bhel, trip coil shunt 30 volt dc suitable for 11 kv vcb make erl, trip coil shunt 30 volt dc suitable for 11 kv vcb make alstrem, trip coil shunt 30 volt dc suitable for 11 kv vcb make schenider, trip coil shunt 30 volt dc suitable for 11 kv vcb make stelmec, trip coil shunt 30 volt dc suitable for 11 kv vcb make c&s, trip coil shunt 30 volt dc suitable for 11 kv vcb make - s&s, closing coil shunt 30 volt dc suitable for bhel make vcb, closing coil shunt 30 volt dc suitable for crompton make vcb, closing coil shunt 30 volt dc suitable for essun make vcb, closing coil shunt 30 volt dc suitable for megawin make vcb, closing coil shunt 30 volt dc suitable for stelmec make vcb, closing coil shunt 30 volt dc suitable for areva make vcb, expulsion fuse 40 amp. (t-40) for capacitor bank, expulsion fuse 60 amp. (t-60) for capacitor bank, digital clamp meter tong tester (0-750 volt ac 1000 amp. ac) make- mexo/motwane, megnatic oil gauge for power transformer (mog) 6 inc dia with lead, spring charging motor suitable for 11 kv vcb make-bhel, spring charging motor suitable for 11 kv vcb make - crompton, mfm suitable for control panel of all makes., selector switch suitable for control panel of all makes., buchholz relay(gas & oil operated) (is 3637) flenge-6 inch, gi nut bolt assorted size, tool kit with box specification having per kit 1-de spanner set of 10 pieces no. 6x7 to 24x27 2-ring spanner set of 10 pieces no. 6x7 to 24x27 3- cutting pliers (8 ) 01 no 4-nose pliers (6 ) 01 no 5-pipe wrench adjustable (12 ) 01 no. 6-hammer 01 no. 7-hexa with blade 01 no. 8-screw driver (06 ) 01 no. 9-screw driver (08 ) 01 no. 10-screw driver (10 ) 01 no 11-screw driver (12 ) 01 no 12-wrench pana 13-chisel 01 no make tapariya/venus, 11 kv insulated pull rod suitable for bhel make vcb with copper shunt, piercing connector type i for single phase/three phase suitable for 70-150 sq mm cable, raincoat(rubberisied) with cap make duckback, bamboo ladders 24 (feet) long approx having 2 to 3 dia at the bottom and 1.5 to 2.5 at top of bamboo the cross piece i.e. 16 no. step should be at a distance of approx 17 and bamboo ladder should be tightened with g.i. wire of 16 swg at least 4 places the top of ladder should be wide 35 to 40 cm and bottom 58 to 60 cm, silica gel (blue)2 to 4 mesh, breather with silica gel (blue) 2 to 4 mesh for power transformer capacity 5 kg, poly propylene rope 24mm dia make tuff rope/equivalent standered make with isi mark., smart connector suitable for m-16 ct tetminal to dog/raccoon suitable for ai alloy, cb smart clamp for dog/raccoon and panthor conductor, 30 volt dc led type indicating lamp of green/red/yellow colour, breaker control on/off switch handle type suitable for control panel make-recon/kaycee/any standard, lv brass stud complete made of brass stud with its all accessories for 200/315 kva distn. transformer one set for brass stud 300 amp shall comarion of brass stud 265x20 mm 01 no. brass hexa nut full thred-01 no., brass lock nut-02 no., brass rear nut-02no. sealing ball washer -01 (neoprene rubber washer) & brass plain whaser-02 no approximate weight 1050 gram -+5% tollarence., lv brass stud suitable for 25/63/100 kva x-mer length of rod 200mm dia 12mm, both & therder up 60 mm heaving chuck out washer & bass washer with 05 no. nut approximate weight 320 gram -+5% tollarence, 33 kv bushing for ptr suitable for 20 mm stud, 11 kv bushing for ptr suit

Central Government And Public Sector

CTN :45246624

28 May, 2026 NA

Multi City - Bihar

Tender For auction sale of depot miscellaneousllaneous scrap - electrical parts & fittings scrap (comprising of ceiling fan 1200 mm and 1400 mm & spare blade with handle, invertors off sizes, battery charger, reading light, carriage fan with net & spare net, bldc fan 400 mm with net & spare net, dg exhaust fan, 2 mbps line terminal, outdoor fitting, led street light fittings, ms meter, exhauster fan, fluorescent light, earthling device, wall bracket fan, air circulating fan, emergency light fitting, solar plate, meter box, converter, switch board off size, led batten-1x18 watt, hrc fuse, carbon brush, aqua guard water, voltage stabilizer, air compressor, blower, room heater, power contractor, 9 watt tubular led lamp, night light fitting, change over switch, energy meter, control transformer- 100 & 200 volt, stand fan, fl fitting, electronic rectifier cum regulator unit, led t-8 batten, water geyser-10, 15 & 25 liters, main switch 300 ah, pcbs& led flood light-30, 70 & 200 watt fitting, compressor-5.5 tone, 1.0 tone, 1.5 tone & 2.0 tone, m.c.c.b 125 ан, 63 ah & miscellaneous electricals parts & fittings etc. qty. 13900.00 kgs.

State Government

CTN :45272849

19 Jun, 2026 35.64 Crore

Shikaripura - Karnataka

Tender For survey, investigation, design, supply, erection, testing and commissioning of tank filling scheme for filling 32numbers of mi/zp tanks of gudavi(head works consisting of construction of barrage, in take trough with forebay, jack well cum pump house, vertical turbine pumps coupled to motors, pump house electrical works, necessary valves, delivery pipe, manifold system, electrical panel, soft strater, capacitors, 11kv transformer, 11/0.433 kv sub station, 11 kv power line and 11 kv terminal bay, rising main, pressure distribution) in soraba taluk by lifting water from varada river near gudavi village including operation & maintenance for a period of five years after successful commissioning of the work for gudavi tank filling scheme works on turnkey basis

corporations/Associations/Others

CTN :45285635

25 May, 2026 NA

Ambala - Haryana

Tender For auction sale of 33 kv vcb off size scrap etc.,11 kv ct 200-100-75/5a & 400-200/5-5ascrap etc.,33kv isolator mechanical electrical locking etc.,220kv wave trap 1250 amp scrap etc.,66/132 kv simplex directional feeder c&r panel scrap etc.,2v, 500ah vrla battery cell-scrap etc.,11/0.4kv 25kva station transformer-scrap etc.,66kv wave trap inductance-1mh etc.,11kv zinc oxide la pedestal mounting etc.,11kv capacitor celloff size-scrap etc.,unarmoured copper control cable-scrap etc.,11kv feeder vcb panel aux voltage 220v dc etc.,132kv tf current transformer, 150-75/0.577-1-1a-scrap etc.,33kv simplex non-directional feeder c & r etc.,220kv zinc oxide la, pedestal mounting, etc.,11/0.4kv 200kva station transformer-scrap etc.,11kv xlpe aluminium power cable-scrap etc.,11kv feeder vcb aux.voltage 220v dc etc.,empty transformer oil drum etc.,dirty/used transformer oil etc.

CTN :44964160

20 May, 2026 18.38 Lacs

Bhadradri Kothagudem - Telangana

Tender For corrigendum : roof bolts, m.s. bolts & nuts , rivets, washers & screws , , dog nails , , fish plates, nuts & bolts for fish plates , , belt jointing pins , , cable hooks and signal hooks , , belt conveyor rollers , , belt sections , , resin capsules , , cement capsules , , gi canisters , , blasting gallery - spacers , , radiator repairs , , repairs and rewinding of motors of ac & dc , , repairs / rewinding of transformers (welding/lighting/power) , , gl wire , , wire mesh for longwall salvage , , manufacturing of supply of electrical coils for , , i) ac motors up to 6.6kv grade , , li) transformer coils up to 33 kv grade , , repairs of rotors for electric motor , , lighting cable , , steel chock manufacturing , , house wiring , , all types of fan repairs , , shovel bucket welding , , repairs of pumps , , couplings manufacturing , , special steel and alloy castings , , (tooth points, track pads, mn steel casting) , , manufacturing of fly ash bricks (not to be manufactured at stores site. it shall be at their own site) , , manufacturing of pump components (spares) , , transformer oil filtration , , reconditioning of drill bits an drill rods. , , vulcanizing the old training cable sof drill machines, sdls, lhds etc (work should be carried out at the respective mine premises. , , manufacturing of earth clamps, g.i.flats, g.i.bolts and nuts. , , crimping of hydraulic hoses. , , repairs to hydraulic pumps, motors, control valves and other related components. , , refurbishing of lt & ht switches with oem spares including testing. , , manufacturing/repairs of slip rings & d-contacts. , , furniture repairs i.e. cane chairs, tables, almirahs etc. , , repairs to wet grinders, water purifiers and water coolers , , manufacturing of coupling bolts of all sizes , , fabrication of oht line components like cross arms, clamps, stay wires, cross brassings, base plates etc. , , manufacturing of haulage rope drum rollers. , , all sizes of ventilation doors. , , safety boards designing/stickering/painting with retro-reflective radium papers/paint on hemm/ radium stickering in underground & surface, radium boards, safety boards & radium jackets. , , fabrication of lighting & cable cross over towers , , maintenance & repairs of air conditioners on hemm , , painting work in underground and on surface , , fabrication and erection of ms structural works like gantry, bunker etc. , , tailoring works at hospitals & area workshops , , manufacturing of hume pipes , , clay pills manufacturing , , maintenance of pmts/lighting transformers/power transformers & sub-stations , , erection /renovation of residential/pmts/sb-station earth pits (conventional type /chemical type). , , testing of all protective relays & mprs , , tub assembling/repairing of coal tubs in mines. , , cl casting works like ci pulley, tub wheels , , outsourcing works in mines, like masonary walls construction, surface material loading, cleaning and dusting in underground etc. , , all types of computer software installation, antivirus, hardware and network installation. , , cc cameras installation and repairs.

CTN :45048307

08 Jun, 2026 NA

Tarapur - Maharashtra

Tender For : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of spares for diese

CTN :45192183

25 May, 2026 8.54 Lacs

Ramgarh - Jharkhand

Tender For complete rewinding/repairing, installation and testing etc. of 2mva, 11kv/3.3kv copper wound, oil cooled transformer make- east india electrical, sl. no. - 458a/2 of power house substation, argada of sirka group under argada area.

corporations/Associations/Others

CTN :45199755

18 May, 2026 NA

Mau - Uttar Pradesh

Tender For auction sale of plates angle 101x76x76mm,crystal unit quartz 1 khz frequency type,transformer 250v a,charger battery solar , 25 w for stars v,panel electronic circuit synthesizer a5a,power supply (drg no-4579-741-601-18),rectifier(mau),bty nr liso 7.2v 4.5ah,bty non rechargeable cable lisol 15v 8ah,mixer ezm 302 dha-0059,dc servo amplifier em 1801/a,dc servo amplifier em 1803/a,transformer current,relay 326 430 d 220 vac,synthesiser electrical freq unit 2 to 30,panel electronic circuit mum bus cpu,panel electronic circuit rx memory,power supply assembly,panel electronic circuit rx modem,tx pre-triger cord pcb,grid cathode drive card ld-12

CTN :45175471

28 May, 2026 NA

Billimora - Gujarat

Tender For supply of bi facial solar panel 550 watt , topcon solar panel 610 watt , cut section of gate valve,globe valve,ball valve,diapharm valve,needle valve,check valve,safety valve,butterfly valve,pnematic control valve 4 inch diameter , cut section of centrifugal pump,gear pump,multistage c f pump,reciprocating pump,screw pump , cut section of shell and tube heat exchanger acrylic material , cut section of reactor with accessories motor,agitatot,support leg,nozzle,manhole,baffels,thermo well,bottom valve , gauge manifold with gauges different size of hoses for r134a,r22,r32 and r 410 , wash bag cover jacket for ac service indore 1 point 5 ton,2 point 5 ton capacity , safety belt, industrial type full body protection double rope double hook,100 kg human weight , embroidery machine , brake test arrangement with two spring balance 0 to 25 kg rating , automatic motor coil winding machine with step arbor , three phase variable auto transformer ac varic 3 phase , 0 to 440v, 25a, 50 hz , synchronous motor, with accessories , vfd ac drive ac motor drive with vvvf control 3 phase , single phase transformer, core type, air cooled,1 kva,240 or 415 v,50hz , stepper motor with digital controller , bipolar , 12v dc , input pulse 5v, step angle 1 point 8 , power supply 230 v ac , oprating condition 0 to 40 deg c , bldc motor fan with controller 40 watt , servo motor with contoller 300rpm,12v dc,6mm dia and 15mm legth shaft ,holding torque 30kg cm,no load current 0 point 8 amp,full load current 7 point 5 amp , electrical test bench integrated with 0 to270v ac variac 25a ) /bid number : gem/2026/b/7525454 * /dated: 13-05-2026 & & / bid document 1 / 20

CTN :45005427

18 May, 2026 NA

Doiwala - Uttarakhand

Tender For miscellaneous electrical goods - supply of misc electrical goods, supply of dowells make crimping lugs(copper/aluminum),round sleev discount on price list to be quoted (current price list to be attached with tender) discount on price list will be allowed @_______%, bch make limit switch 415 v, type ltpr, bch make foot switch s pole , acii-440ac/a,dc11-230dco.2a, 600 v max., limit switch of above foot switch bch make, hand lug crimping machine 1.5 mm to 25 mm dowells/jainson make, over load relay 0.9 to 1.35 amp., air break contactor 16 amp. 415 v, ac bch make catagary coon., no volt coil of above for bch make contactor 415 vold ac, aur.contact block for bch make (1 no + 1 nc) for above contactor, anti corrosion paste for lug punching dowells make, machanical crimping machines 25sq.mm to 400 sq.mm with dye hydraulic, sealing kit for above solenoid valve rotex make ( rubber o rings), hard drawn copper wire 4 swg, hard drawn copper wire 6 swg, brass holder for cane unloader carbon brush (95x30x20), rishab make ampere meter 96 x 96 mm, a) range 0- 200 amp, ctr 200/5 amp., b) range 0- 250 amp, ctr 250/5 amp., c) range 0- 150 amp, ctr 150/5 amp., d) range 0- 400 amp, ctr 400/5 amp., e) range 0- 120 amp, ctr 120/5 amp., f) range 0. 50 amp. ctr 50/5 amp., k) range 0. 60 amp. ctr 60/5 amp., l) dol range 0. 10 amp. dol, m) dol range 0. 15 amp. dol, n dol range 0. 30 amp. dol, o) dol range 0 5 amp dol, rishab make ampere meter 70 x 70 mm rane 0 150 amp, ctr 150/5 amp., rishab make ampere meter 96 x 96 mm range 0-100, ctr 100/5, rishab make ampere meter 96 x 96 mm range 0-75 amp,, havells make change over switch 4 pole, 415 volt, a) 600/630 amp, b) 400 amp., c) 315 amp., d) 1000 amp., e) 250 amp, f) 800 amp, 3 phase swicth interiar 800 amp ee make type cmm-800 415 volt ac, hrc fuse ee make 800 amp, i.c.t.p. switch 100 amp. 415v, havells make, i.c.t.p. switch 63 amp., 415v,(havells make), i.c.t.p. switch 32 amp., 415v,(havells make), i.c.t.p. switch 16 amp., 415v,(havells make), rishab make volt meter range 0-500, size 100x 100mm, digital frequency meter 2/3 phase, 50 hz, 415v, 96 x 96mm meco make, al external fan for ngef make motor frame amk 180, 20 hp, air heater 200 w manufactured by amit agro associates rampur, copper sleeve/ pipe 25 sq mm, copper sleeve/ pipe 50 sq mm, copper sleeve/ pipe 70 sq mm, copper sleeve/ pipe 120 sq mm, copper sleeve/ pipe 185 sq mm, copper sleeve/ pipe 240 sq mm, old type indicating 7 watt lamp with holder vaishno/siemens (p.t.), c.t. 50/5 and 60/5, c.t. 75/5 and 100/5, c.t. 60/5 and 50/5, c.t. 200/5, c.t. 300/5, c.t. 400/5, c.t. 250/5, c.t. 600/5, c.t. 800/5, bharat bijlee make crc- 2 26 in 415 ml(300 gms) packing, taparia/everest make insulating plier size 8 , lock nose plier 8 , screw driver set/ kit tapparia make, taparia make line tester cum screw driver, taparia make phase tester 500v,no.813, digital multimeter 4.1/2 digit,19999 lcd large display with annu. meco make , model 235 mark i, range : dc voltage 200 mv12/20 , 200/1000v, accuracy: +/- 0.05% rdg. , + 4 dg./on. , all ranges, ac voltage: 200 mv/2/200/750 (4 hz + 3 khz). power- one 9v battery eveready , type 216- fluck make, empire glass cloth paper 7 mile, empire tape 1 width x 10 mtr long, weaving tape 1 with x 10 mtr long, cotton tape 1 width x 10 mtr long, super fine glass tape 1 width x 10 mtr long, cona/steel grip make pvc adhesive tape 12 mm width x 8.5 mtrs, a.c. transformer, primary voltage 415v, secondary voltage 110 v, va-1250, rank make, rank/usha make heavy duty auto battery charger 24 v output, supply with on-off switch, selector switch, volt meter & amp. meter complete unit. input 220 v, usha make rectifier for battery charger 1/12, leatheroid paper with plastic film 5 mile in standard sheets (trivolton make), do- but 7 mile, glass sleeve 12 mm, glass sleeve 1 mm, glass sleeve 2 mm, glass sleeve 3 mm, glass sleeve 4 mm, glass sleeve 5 mm, glass sleeve 6 mm, glass sleeve 8 mm, glass sleeve 10 mm, distilled water, battery termina

Power Conditioning Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

State Government

corporations/Associations/Others

corporations/Associations/Others