Web Analytics Made Easy - StatCounter

Power Conductor Tenders

Get complete information related to latest Power Conductor Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Power Conductor Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Power Conductor Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45304690 Due date: 03 Jun, 202603 Jun, 2026 99.6 Thousand
Tender For supply of pvc insulated copper cable single core and multi core circular sheathed with rigid conductor (v2) isi marked to is 694 (q2)

Central Government/Public Sector

CTN :45267098 Due date: 15 Jun, 202615 Jun, 2026 NA
Tender For corrigendum : item type: item description: supply of large span wire 130 sq mm stranded cadmium copper conductor conforming to rdso specification no.- ti/spc/ohe/cat cu-cd/0971 or latest. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45036974 Due date: 02 Jun, 202602 Jun, 2026 NA
Tender For ratlam division-replacement & repairing work of pantry equipment's in lhb ac pantry car at ind and dadn based primary rakes for a period of two years. - sealed compressor , condenser motor , condenser unit , blower motor , replacement of rotary switch , door clutch handles , led indicators , supply & replacement of deteriorated chimney filter , leak testing, gas charging and replacement of capillary / dryer filter for bottle cooler/deep freezer /(b/c&df) (supply & erection/labour) , supply & fixing of cooking table switch plate safety cover with lock arrangement made of ss304 , supply & fixing of bottle cooler door with insulation & gas kit made of ss304 , supply & fixing of deep freezer door with insulation & gas kit made of ss304 , supply, installation and commissioning of flying insect killer as per rcf specification no. edts-155 (reva) or latest for main pantry cars of lhb type ac coaches , supply & fixing of door gasket for df/bc , supply & fixing of flexible earthing shunt of branded tinned copper conductor.

State Government

CTN :45089198 Due date: 29 May, 202629 May, 2026 6.76 Lacs
Tender For corrigendum : supply of pvc insulated copper cable single core and multi core circular sheathed with rigid conductor (v2) isi marked to is 694 (q2)

State Government

CTN :45303639 Due date: 06 Jun, 202606 Jun, 2026 NA
Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

State Government

CTN :45289480 Due date: 30 May, 202630 May, 2026 NA
Tender For renovation of electro mechanical items for rural ws scheme, lesliganj - part a (raw water p/plant mali river at sitadih ), cost towards repairing and overhauling of 50 h.p. v.t. pump set multiple stage ball assembly s/f impeller g.m. bush as per sample 5 nos each, s/f housing bush as per sample. replace in spider rubber cutless bush 5 nos, replacing of 25mm dia. 5 feet long s.s. line shaft 4 nos with s.s. socket . transportation charge from site to work shop vice versa including tools tackles and labour charges for lifting & lowering v.t. pump before and after repairing work etc all complete at pumping plant., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 50 h.p. 440 volts, 50 c/s, star delta, 3 phase hollow shaft v.t. motor by supplying super enameled copper wire & binding, tapping varnishing, heating, testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 2 nos, timer 1 no., thermal over load release relay 2 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., cost towards supplying & fitting 35 mm2 3 core copper conductor 15 mtr panel to motor., cost towards supplying & fitting 60 watt led street light (jsor-m840), part b (clear water lesliganj.), cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 3 nos, timer 1 no., thermal over load release relay 3 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 20 h.p. 440 volts, 50 c/s, star delta, 3 phase induction motor by supplying super enameled copper wire & then tapping varnishing, heating & testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost for repairing of 20 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., cost towards varnishing, heating of winding & greasing of both side ball bearing of 25 h.p. induction motor 3 phase, 1440 rpm, volt 410 10% 50 cycle along with supplying & fitting of tyre coupling 2 nos, then testing on full load at site including supply of all labour tools and tackles., cost for repairing of 25 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots o

corporations/Associations/Others

CTN :45294905 Due date: 03 Jun, 202603 Jun, 2026 2.97 Lacs
Tender For supply and installation of various electrical equipments in place of burn out and damaged ones at different panels and allied works at shanagar burning ghat. - supply and delivery of mccbs with thermal magnetic release breaking capacity thermal release rang 125-160a, breaking capacity icu at 415v ac, 50hz, 50ka4pole , supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range: 24-40, mn2, , power contactors: supply and fixing the power contactor t.p 70a, l & t make (ml-4) having 240v, 50hz, coil incl. 2 no + 2 nc aux contact block., , power contactors: supply and fixing the power contactor t.p 16a, l & t make having 240v, 50hz, coil incl. 1no+1nc aux contact block., , supply & fixing of 415/440 volt, hrc fuse (make: l&t/havels/cgl/ge).for 250 amp supply and fixing of analog ammeter ranging 0-100amps having c.r ratio of 100/5a, 144 mm sq size (make: ae/kappa/mp)., , supply and fixing of analog voltmeter ranging from 0-500 v of 144 mm sq size (make: αε/καрралмр)., , supplying and fixing 415v, tpn sfu open execution in existing ss enclosure/cubical with nuts bolts etc incl. s & f 3 nos. din type hrc fuse as per rating. 125a siemens, , supplying and fixing 240/415 v mcb of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection legrand 63 a fp, , supplying of 1.1 kv. grade pvc insulated conductor of following cables (make: polycab/gloster/havells/):size in sq. mm, no & dia. of wire in mm, no of core - 4 1/2.24 3, , annexure - i basic rate of materials: (all rates of materials from k-1 to k-14 are excluding vat) 70.1.5 sq.mm 'fr' stranded copper wire, , compression glands.supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture(proof entry of xlpe/pvc armoured cables as below: for, , 3 core.(i)upto 4 sqmm, , finishing cable ends.(b)finishing the end of following xlpe/pvc, , armoured cables by crimping method incl. supplying and fixing solderless socket (dowels make), tapes, anticorrosive paste & jointing materials. (ii) 2 core 6 sqmm cable, , temperature controller: a) supply and fixing the digital type temperature controller of range (0-1200) deg. c of overall dimension 92 sq mm dia x 105mm depth having (cr-a1) heat sensor and 1 no + 1 n.c change over contact to be actuated at crossed of desired temperature in deg.c complete power supply unit of 230v 50 hz., , blue max make

State Government

CTN :45291512 Due date: 06 Jun, 202606 Jun, 2026 NA
Tender For tender for supply of supply of hardware fittings and conductor accessories -33kv isolator jaw made of copper (m/s rama make isolator) having 1250 amp. , supply of 33kv isolator jaw made of copper (m/s rama make isolator) having 2000 amp. , supply of 33kv ct bi-metalic terminal connector duly made of lm-6 alluminium alloy. twin acsr panther conductor , supply of 33kv cb bi-metalic terminal connector duly made of lm-6 alluminium alloy. twin acsr panther conductor. , supply of lm -6 all-alloy 33kv ct clamp threaded type suitable for twin panther conductor. , supply of lm -6 all-alloy 132kv ct clamp pipe type suitable for twin panther conductor. , supply of terminal connector of 132kv isolator suitable for twin panther conductor.

State Government

CTN :45293777 Due date: 29 May, 202629 May, 2026 3.54 Lacs
Tender For procurement of tools and equipment for lascars/helpers towards operation and maintenance activities for irrigation sub division no.1, nizamsagar - supply and transportation of 1 hp single phase self priming mono block ip44 motor pumpset. makes: texmo / cri / ksb / aryenvarsha / lubi / falcon , supply and transportation of 5 hp three phase mono block ip44 motor pumpset. makes: flowell / waterman/ ellen / narayani / sai varsha / sterling / duke / samudra / ajantha , supply of 13 mm fibra fiberglass measuring tape - 30m/100ft with unbreakable abs case, durable curved mechanism handle & steel end hooks, make: freeman as directed by engineer-in charge , supply of 2.00 hp four stroke straight shaft brush grass cutters with 2-teeth blade (14 inches) for cutting, which is 360° inclinable. ideal for tough, sloping, and rugged terrains. make:-honda, agriplus, neptune, green leaf as , supply of 4 sq.mm 3 core pvc / xlpe insulated sheathed multi core bright annealed bare copper conductor heavy duty industrial cables for voltage grade upto 1100 volts as per is: 694:2010 including all transportation charges etc complete. , supply of axe with wooden handle as directed by engineer-in charge , supply of chain saw 22"(petrol) for tree cutting with 58cc powered as directed by engineer-in charge , supply of chains for chain saw machine as directed by engineer in charge , supply of electric shock proof hand gloves as directed by engineer-in-charge , supply of gumboots with steel toe isi mark for men as directed by engineer-in-charge , supply of hammer as directed by engineer-in-charge , supply of hand saw with wooden handle(iron prunning curved saw) for grass, wood, tress cutting as directed by engineer-in charge , supply of heavy duty steel tiller pitchfork with handle as directed by engineer-in-charge , supply of hoe tool (favda) for digging heavy duty as directed by engineer-in-charge , supply of iron digging bar/crow bars as directed by engineer-in charge , supply of nylon rope of 20mm diameter 60 mts in length as directed by engineer-in-charge , supply of plastic multipurpose gamelas (43.8 cm x 39.2 cm x 13.2 cm) as directed by engineer-in charge , supply of rechargeable aluminium body led torch with 120-volt ac/dc charger long range as directed by engineer-in charge , supply of saddle / clamps suitable for fixing 4 to 10 sqmm 2 core cable. , supply of safety helmet hard hat steeplejack climbing work construction worker adjustable headband 2 side venting design cushioning as directed by engineer-in-charge , supply of sickle with wooden handle for weed cutting as directed by engineer-in charge , supply of sluice operating handles as directed by engineer-in-charge , supply of taparia combination spanner set css25 (25 pieces) as directed by engineer-in charge , supply of tool box & screw driver kit as directed by engineer-in-charge , supply of waterproof standard length, high quality polyester fabric double coating reversible rain coat with hood & inner mobile pocket. set of top and bottom as directed by engineer-in charge

corporations/Associations/Others

CTN :45317200 Due date: 01 Jun, 202601 Jun, 2026 2.88 Lacs
Tender For supply of 24w led light and 4sq.mm.copper conductor at prantijnagarpalika, prantij (4th attempt)
 Loading, Please wait...

Connect us via What's Up