Latest power control centre Tenders | Government power control centre Tenders

Central Government And Public Sector

CTN :45332436

15 Jun, 2026 NA

Port Blair - Andaman And Nicobar Islands

Tender For providing of calibration services - medical; mass and volume, pressure and vacuum, force, speed & acceleration, voltage, current, power (ac/dc), frequency, power factor, phase angle, specific heat & humidity, temperature, pressure, medical device calibration; nab..

Central Government/Public Sector

CTN :45337106

02 Jun, 2026 NA

Kota - Rajasthan

Tender For supply of 2.8kva dg set portable generator type petrol start and petrol run, rated output at unity power factor at stp 2800va, recoil, 230v ac output voltage. [ warranty period: 24 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45336012

22 Jun, 2026 NA

Salem - Tamil Nadu

Tender For supply of energy efficient bee 5 star rated bldc ceiling fan 1200 mm sweep with 3 blades suitable to operate in 230v 50hz ac supply with 2 canopies and 300 mm down rod.1.power consumption: (maximum) 28w.2. voltage range: 140 to 240 volts. 3. air delivery (minimum): 220 cu m/min 4. replacement warranty (minimum): 5 years. 5. power factor (minimum): 0.9. 6. total harmonic distortion (maximum): 20%. 7.rated service value (in m3/min/watt) - minimum 6.0 8. special features: electronic regulator with ir remote. 9. availability of performance and type test report from govt lab/ nabl/ilac: as per is: 374:2019 or latest. 10. the fan should comply to is: 374:2019 or latest. 11. blade thickness: 1.1 mm 12. blade material: aluminium 13. bearing: double ball bearing 14. shank thickness (min.): 2 mm 15. shackle thickness (min.): 2 mm 16. preferred colour: white/brown/cream/ ivory acceptable make: bajaj ,crompton , havells , atomberg , usha, activa, luker, orient, halonix, almonard and panasonic.supplier to ensure that the offered product is supplied with valid oem`s warranty certificate [ warranty period: 36 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45331899

10 Jun, 2026 NA

Nashik - Maharashtra

Tender For providing of calibration services - electrical; frequency, power factor, phase angle, voltage, current, power (ac/dc), resistance; nabl labs; buyer premises (onsite)

Central Government/Public Sector

CTN :45318855

15 Jun, 2026 4.34 Lacs

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of net protector antivirus software for single user with one year validity. make - npav. , 24 pin switched mode power supply unit. 180-240w 12 volt a.c suitable for desktop computer. make - foxin , usb hd web camera 1280 x 720 pixel inbuilt noise clearance microphone with 1.2 meter usb cable and all accessories make -logitech brio 100. , wireless keyboard and mouse combo for desktop computer. make - hp. , 12 volt 7.5 ah leak proof sealed maintenance free lead acid battery suitable for 750 va offline ups make - microtek. , 512 gb sata solid state drive suitable for desktop computer. make - crucial , 512 gb nvme m.2 solid state drive suitable for all in one and laptop. make - crucial , 08 port metal managed poe ethernet switch with suitable power adopter and all accessories. make - tp-link , 16 port plastic non poe ethernet switch with suitable power adopter and all accessories. make - tp-link , 04 megapixel ip bullet camera outdoor day night function with wall fixing bracket etc. make - dhauva. , 01 kva 800 watts line interactive ups with avr abs plastic enclosure. make - microtek. , 55 cm 21.5 inch ips full hd frame less led monitor with inbuilt stereo speaker. make - hp , 03 volt cr2032 lithium coin cell c-mos battery for desktop computer. make - duracell. , 8-port metal hdmi splitter with required dc power adopter. make - reputed. , intel h-61 computer mother board suitable for 2 nd or 3 rd gen intel processor. 02x08 gb ram dimm slot lga 1155 socket. make - asus , intel h-81 computer mother board suitable for 4th gen intel processor. 02x08 gb ram dimm slot lga 1150 socket. make - asus , intel h-110 computer mother board suitable for 6 th and 7 th gem intel processor up-to 16 gb ddr-4 ram lga 1155 socket. make - asus , smps suitable for lenova - v530-15icr mini custom atx cabinet computer. make - lenova. , dell oem smps suitable for dell -vestro d13s-d13s003. 14 pin hu200ebs00 - small form factor custom atx cabinet. make - dell. , printer head - cmyk- suitable for brother multifunction ink tank colour printer. model mfc - t920dw. make - brother.

Central Government / Public Sector

CTN :45297643

12 Jun, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of 2tb external portable hdd with the following specs: storage size: 2tb or higher, hard disk interface: usb3.0, form factor: 2.5 inch, hard disk rotation speed: 5400 rpm or higher, compatible: with windows and mac, easy plugand play. no wall adaptor/power required for working, warranty: 3 years, accessories: shockproof, water-resistant travel/storage pouch to be provided along with the hdd. make: seagate, samsung, wd or equivalent. [ warranty period: 36 months after the date of delivery ] ]

CTN :45336912

22 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of plantary gear box with brake motor , model - 4 kt 10 x mb , reduction ratio - 368.00 , mounting foot orientation horizontal input brake motor, input power 5 hp, input speed 1440 rpm , output shaft - solid, output speed 3.91 rpm , rated torque - 15,637.00 nm , generated torque 7,272 nm , lubrication oil service factor 2.15 , make - kavitsu/elecon , vertex / shanthigears qty. 01 set [ warranty period: 30 months after the date of delivery ] ]

CTN :45332966

11 Jun, 2026 NA

Rourkela - Odisha

Tender For supply of electrician screwdriver thin stem insulated handle , electrician screwdriver thin stem insulated handle , knife double bladed electrician , neon tester , blow lamp brass , crimping tool , wire cutter and stripper , copper bit soldering iron , de soldering gun , contactor and auxiliary contacts , limit switch , rotary switch , relay cut out relays reverse current relays over current relays under voltage relays , pin type shackle type egg type and suspension type insulators , hydrometer , portable electric drill machine , load bank lamp or heater type , laboratory type induction coil , out side micrometer , knife switch dpdt fitted with fuse terminals , knife switch tpdt fitted with fuse terminals , earth plate , earth electrode , mccb , elcb , rccb , fuses , rheostat sliding type , capacitors , various lamps , bus bar with brackets , rubber mat , electrician helmet , safety belt , ohm meter series type and shunt type portable box type , digital multi meter , a c voltmeter m i analog portable box type housed in bakelite case , milli voltmeter centre zero analog portable box type housed in bakelite case , ammeter mc analog, portable box type housed in bakelite case , ac ammeter mi analog portable box type housed in bakelite case , kilo wattmeter analog , digital wattmeter , a c energy meter , power factor meter digital , frequency meter , magnetic flux meter , lux meter , tachometer , tong tester or clamp meter , megger , 3 point d c starter , 4 point d c starter , wheat stone bridge with galvanometer and battery , single phase variable auto transformer , phase sequence indicator , growler , ac starters , oscilloscope dual trace , function generator , soldering iron , temperature controlled soldering iron , discrete component trainer , linear i c trainer , digital i c trainer , electric induction plate , electric kettle , electric iron , immersion heater , a c ceiling fan and ac table fan , geyser storage type , mixture and grinder , washing machine semi-automatic , motor pump set , inverter with battery , voltage stabilizer , dc power supply , battery charger , current transformer , potential transformer , solar panel with battery , ink jet or laser printer , dc compound motor with starter and switch , thyristor igbt controlled d.c. motor drive with tacho generator feedback arrangement , thyristor igbt controlled a.c. motor drive with , electrical machine trainer , used dc generators series shunt and compound type for overhauling practice , motorised bench grinder , manual motor coil winding machine , ceiling fan coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger home , portable double telescopic ladder , 3 ph variac , rotary hammer drill 1 ph , lcr meter

CTN :45290169

28 May, 2026 1.90 Lacs

Delhi - Delhi

Tender For supplying of materials for day to day electrical maintenance work for qtrs at sarojini nagar, sewanagar, delhi cantt.a.g.road kali bari p t colony under pesd-iii, ndgpo, new delhi.. -pvc insulated copper conductor, single core cable as required., g modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., supplying call bell/ buzzer suitable for single phase, 230 volts, complete as required, supplying following rating, 240/415 v, 10 ka, “c” curve, miniature circuit breaker/isolators suitable for inductive load of following poles etc. as required., suplying of 4 feet(approx) 20watt led poly carbonate tubular lamp with driver suitable for 230v, 50hz ac supply etc as reqd.(m/s havells/philips/wipro or ss make), supply, installation, testing and commissioning of ceiling fan with brush less direct current (bldc) motor, class of insulation: b, 3 nos. metal (aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/al body power factor not less than 0.9, service value (cm/m/w) minimum as below, 350 rpm (tolerance as per is : 374-2019), thd (total harmonic distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac ceiling fan compliant to is 374:2019 fan supply, earthing etc. complete as req

CTN :45290172

28 May, 2026 1.90 Lacs

Delhi - Delhi

Tender For supplying of materials for day to day electrical maintenance work for po bldgs under sspo south south-west division under pesd-iii, ndgpo, new delhi. - pvc insulated copper conductor, single core cable as required., g modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., supplying call bell/ buzzer suitable for single phase, 230 volts, complete as required, supplying following rating, 240/415 v, 10 ka, “c” curve, miniature circuit breaker/isolators suitable for inductive load of following poles etc. as required., suplying of 4 feet(approx) 20watt led poly carbonate tubular lamp with driver suitable for 230v, 50hz ac supply etc as reqd.(m/s havells/philips/wipro or ss make), supply, installation, testing and commissioning of ceiling fan with brush less direct current (bldc) motor, class of insulation: b, 3 nos. metal (aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/al body power factor not less than 0.9, service value (cm/m/w) minimum as below, 350 rpm (tolerance as per is : 374-2019), thd (total harmonic distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac ceiling fan compliant to is 374:2019 fan supply, earthing etc. complete as req

Power Control Centre Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector