Latest power distribution panel scrap Tenders | Government power distribution panel scrap Tenders

corporations/Associations/Others

CTN :43173836

22 Dec, 2025 9.89 Lacs

Delhi - Delhi

Tender For supply, installation, testing and commissioning of indoor cubical type lt panel suitable for 415 v, 3 phase, 4 wire 50 hz ac supply system at ess vidyut bhawan new, under m -33kv division, new delhi

CTN :42494592

15 Dec, 2025 NA

Jaipur - Rajasthan

Tender For bid to ras supply of dismantling of lt panel cables mccbss , supply only lt panel cubical type out door , copper bus bar of size 40 x 10mm , mccb 4 pole 250 amps 25ka , mccb 4 pole 63 amps 25 ka , digital voltmeter flush mounting , digital ammeter flush mounting , phase indicating lamps led cluster type , digital time switches 250 v single phase of 20 amp

CTN :43140429

25 Dec, 2025 34.90 Lacs

Khetri - Rajasthan

Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c

Central Government/Public Sector

CTN :43151052

15 Dec, 2025 24.91 Lacs

Paradip - Odisha

Tender For supply, installation, commissioning and testing of reefer power supply distribution outdoor panel cubical type front operated with suitable measuring instrument

Central Government And Public Sector

CTN :43114225

30 Dec, 2025 53.35 Crore

Gautam Budnagar - Uttar Pradesh

Tender For supply of administrative furniture d d - dining table 4 seater , 3 seater sofa , 1 seater sofa , 3 seater sofa , 2 seater sofa , 1 seater sofa , center table , side table , coffee table , corner table in black , chair light grey , table rnd corian , book self , 3 seater chair with 4 arms , 4 seater chair with 5 arms , 3 str comm arm, t. white , steel almirah with wooden finish , storwel plain , stools mch ht adj with back , ayush lite attendant bed , attendant bed mattress , aptis over bed table height adjustable on gas lift with membrane top , metal cot without mattress , attendent bed cum chair , single bed , bedside table , 2 door wardrobe , single static push and pull type storage ss1 , single static push and pull type storage sl1 , tm1 solid back panel , channels rails p1p2 chnl , wall mounted study table , 6 seater pu coated , cafe chair , chair with arms , dinning table 6 seater glass black , black dinning chair , reflection 5w linear desk , reception desk, nurse station ,cash counter, lab, store, kitchen, pantry,toilets, drawer units, supports, table storages , reception table , upbeat cafe table with cube leg pu top , flod table worktop , dining table with 30mm thick granitetop 4 seater excluding chairs 4 seater granite top dining table , curtain track , cubicle or privacy curtain , providing and fiing 900x450 mm beveled edge mirror of superior glass , storage cubical , acousticical grid false ceiling , thermocol grid false ceiling , roller blinds , administrative block sls printed fabric ceiling , administrative block veneer ceiling paneling , veneer wall paneling , fluted veneer wall paneling , nilaya ray skin wall paper pattern , nilaya straight up wall paper pattern , mdf beading with c trim , fluted veneer ceiling paneling , subtex clouds nubby kontour grafix bild , liso spots nano plus bild, 600x1200x16mm, conceil-a edge, veneer finish , liso spots nano plus bild, 600x1200x16mm, t and g edge, veneer finish , for auditorium astral plus malla clip-in melange bild, 600x1200mm, hexagonal mesh pattern , for guest house veneer ceiling paneling , for guest house fluted veneer ceiling paneling , for guest house veneer wall paneling , for guest house fluted veneer wall paneling , for guest house nilaya sabyasachi wall paper pattern , for gust house nilaya bolta apex cord wall paper pattern , for guest house mdf beading with c trim , for guest house marmofresco texture paint , reception table , dining table , wooden dining chair , sofa set supply of 3 seater sofa 1 no and single seater sofa 3 nos , center table , side table , curtains supply and fixing as per detailed drawings, labour, lead and lifts etc , arm chair , 450mm dia side table , king cot with headboard , single cot with headboard , revolving chair , arm chair with fabric design , side table with 2 drawers , tv ledge , wardrobe , luggage rack , coffee cabin , toilet vanity counter , vanity mirror , pictures , single mattress hm pocketed et , king mattress hm pocketed et , hair dryer , kettle , tea cup and tray

CTN :42914272

25 Nov, 2025 23.61 Lacs

Multi City - Bihar

Tender For supply, installation, testing and commissioning of indoor cubical panel in 10-court building at civil court kishanganj, distt.:- kishanganj.

Power Distribution Panel Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector