Latest power divider Tenders | Government power divider Tenders

Central Government/Public Sector

CTN :41118445

07 Aug, 2025 NA

Pune - Maharashtra

Tender For supply of welding socket unit of dimension 380(l)x650(w)x300(d) duly housed in outdoor made of high quality thermoplastic polycarbonate pc gfs (shock proof,weather pr oof, rust free, fire retardant, high impact against mechanical load) and should have degre e of ingress protection ip 65 as per iec 60529 to perform under ambient temperature - 35 deg c upto +80 degc. type of mounting: tubular pole mounting, mounting sheet material/canopy should be made of hot dip galvanized iron flat sheet material with thickness shall not be l ess than 2mm and ms flat frame (32x6)mm to be welded on gi sheet. the welding socket unit should comprisisng of the following items. 1.) copper bus bar (r,y,b,n) of each bus bar dime nsion (30x10)mm rating range 100-200amps, and separate earth strip confirmed to is 1897:200 8 or lastest.2.) 63amps 4pole residual current circuit breaker with operating volt age of 41 5volts, 50hz, tripping range : 30ma 3.) 63amps 4pole (3p+n) miniature circuit breaker with ope rating voltage of 415volts, 50hz, breaking capacity range : 10/16/25 ka 4.) 20amps 2pole (p+n) miniature circuit breaker with operating voltage of 230volts, 50hz, breaking capacity range : 10/16/25 ka (all rccb and mcb confirming to is/iec 60898-1:2002 or latest with isi mark), pref ferable make: legrand, havells, schneider, hager, l&t.5.) 63amps 5pin (3p+n+e) and 20amps 3p in (p+n+e) industrial welding socket (with spring supporting door) and suitable plug worki ng on 415volt ac supply, 50hz, of degree of protection ip 67 are designed as per iec 60309-1 and 60309-2, preferable make: schneider, hensel-walther, cape. 6.) 4runs of 16sqmm cu. frls wire. (each r,y,b,n) from copper bus bar to rccb (incomer), 4runs of 16sqmm cu. frls wire fr om rccb (outgoing) to 63amps mcb (incomer), 2runs of 6sqmm cu. frls wire from rccb (outgo ing) to 20amps mcb (incomer), 5runs of 16sqmm cu. frls wire from 63amps mcb(4runs) & green wire from earth strip(1run) to 5pin industrial socket and 3runs of 6sqmm cu. frls wir e from 20amps mcb(2runs) & green wire from earth strip(1run) to 3pin industrial socket. co pper wire confirmed of is 694:2010 or latest. preferable make : anchor, orbit, havells, polyc ab 7.) including cable gland (size confirming by consignee) for loop-in and loop-out of 4cx1 20sqmm ltug cable entry/exit from bottom conform as per en 60423 or latest. din rail for s uitable installations of all rccb and mcb upto 63amps.the manufacture should submit all t est certificate in accordance with latest iec standards. make / brand : cape consisting of 1) emp ty enclosure and mounting flange - spelsberg 2) plug and sockets 63 a/16a ? cape 3) rccb & mcb - l&t 4) conical support - powermat 5) end clamp - connect well 6) earth cable gland with locknut - trinity 7) rep uted make for miscellaneous items like copper bus bar, double compression cable gland, distribution win dow, earth busbar, ms hot dipped canopy, din rail, wiring, screws, nuts, bolts and lugs & other accessori es. hsn code 8537 1000. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41118295

28 Jul, 2025 NA

Itarsi - Madhya Pradesh

Tender For supply of led based driver and assistant desk illumination lamp as per clw specn. no. clw/es/3/ 0042 alt.d technical specifications :- 1)operating voltage 18 to 30 v dc with normal voltage of 24 v d c. 2)high and low glow switch has to be provided. 3)the lamp unit shall have inbuilt reverse polarity, overvoltage trip, spike and surge protection. 4)mechanically the housing shall be as per clw spec. no. clw/es/3/0042 alt.d or latest. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :41103647

28 Jul, 2025 NA

Tirupati - Andhra Pradesh

Tender For motor protection circuit breaker (mpcb) for condenser fan unit, current rating 1.6 to 2.5 amps, class 10, breaking capacity - 50 ka, 3 pole voltage rating 415 v ac, 01 no + 01nc auxiliary contacts for lhb ac switch board ca binet as per rdso spec no. rdso/pe/spec/ 0184-2015 rev 1or latest and rdso lr.no el/7.1.108/mssbc dt:17/09/202 1. acceptable makes: siemens model.no. 3rv2011-1ca10+3rv2901-1e, l&t model.no. st418950000, schneider model no. gv2me07, abb model.no ms116-2.5 and eaton model no.pkzm01-1.6+nhi-e-11-pkz0 only acceptable as per above spec. warranty period: 30 months from the date of supply. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :36365074

18 Jul, 2025 NA

Gandhinagar - Gujarat

Tender For bid to ras supply of microwave frequency doubler - microwave frequency doubler , microwave low noise amplifier , microwave band pass filter , microwave iq demodulator , microwave crystal oscillator with power divider , wide band microwave amplifier , voltage controlled oscillator , microwave power divider , microwave double balanced mixer , microwave co axial fixed attenuator , microwave isolator , co axial termination

State Government

CTN :41022029

22 Jul, 2025 NA

Jharsuguda - Odisha

Tender For corrigendum : procurment of sfu - welding receptcles, switch fuse unit complete box with sfu-32a-tpn (cylendrical fuse link) enclosure material:thermoplastic polycarbonate. degree of protection for empty enclosure: ip65 (iec 60529. mechanical impact strength for empty enclosure: ik08 (iec 62262. system voltage: 415v, 50 hz, ac. mounting type : wall. recommended cable size: incoming: 4c x 25 sq.mm al ar cable, outgoing: 4c x 10 sq.mm cu cable suggested make- cape electric or c&s or hensel or schneider, switch fuse unit complete box with sfu-63a-tpn (cylendrical fuse link) enclosure material:thermoplastic polycarbonate. degree of protection for empty enclosure: ip65 (iec 60529. mechanical impact strength for empty enclosure: ik08 (iec 62262. system voltage: 415v, 50 hz, ac. mounting type : wall. recommended cable size: incoming: 4c x 35 sq.mm al ar cable, outgoing: 4c x 16 sq.mm cu cable suggested make- cape electric or c&s or hensel or schneider

CTN :41054885

23 Jul, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of thermistor protection unit, voltage 115v ac (eg8338v-2109-bd-cp-2097-0-01-27)

CTN :41042526

22 Jul, 2025 14.03 Lacs

Chhabra - Rajasthan

Tender For supply of lt miscellaneous items for lt switchgear lt system for the year 2024-25 unit 5 and 6 csctpp chhabra - air flow sensor sl0101, control supply -230v ac, with 1 no +1nc contact, make-ifm or equivalent, dynamic braking resistor 13 ohms/ 9600w, 10% ed, 10 sec. max, ambient 50 degree,make-iresco/equi or equivalent, fan: axial, dia: 250, 230vac, 50hz, 115w, air flow:1610 m3/h (specification attached at annexure-i), fan: axial, dia: 450, 415 vac, 50hz,480 w, air flow:4530 m3/h,speed-1360 rpm,(specification attached at annexure-ii), fan axial 08" ball bring 230v ac 1p-50hz (as per annexure-iii ), relay assly : 4 relay, 2 c/o, 5a/24v dc, with led indication, iron core reactor 3 phase, 0.359mh/45a, 3 ph iron core, 117 uh/240a, make: rishab/ transformer/epi/equi or equivalent, 3 ph iron core, 67 uh/240a, make:rishab/ transformer/epi/equi or equivalent, 3 phase line choke ,in-21 amp,inductance-4.2mh,class-f,freq-50hz,voltage-415v, 3 phase line choke ,in-21 amp,impedance-3%,class-f,freq-50hz,voltage-415v, ct: metering 250/5a, 15va, class 1, ct dim.: 180{w}, 100{d}, 70{h}, window size:20x35mm, front terminals, resin, cast, insulation class:e, type 2, colour:yellow, resin cast insulaed c.t 400/5a,class-1,va-10, resin cast insulaed c.t 400/1a,class-1,va-10, thermal overload relay range 95-120 a, 125hp three phase submersible pump star delta starter with 3-position selector switch (with auto switch), single phase preventer, current overload protection with short circuit protection., aluminium ring type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, 35 sq.mm, 50 sq.mm, 70 sq.mm, 95 sq.mm, 120 sq.mm, 150 sq.mm, 185 sq.mm, aluminium pin type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 10 sq.mm, 16 sq.mm, 35 sq.mm, copper ring type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 2.5 sq.mm, 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, power terminals mounting on din conforming iec 60947-7-1,voltage rating-1 kv,safe for fingers., current rating-140 a, 35 sq.mm,3 nm, current rating-192 a, 70 sq.mm,6 nm, current rating-232 a, 95 sq.mm,6 nm, copper pin type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 1.5 sq.mm(hollow type), 2.5 sq.mm, 2.5 sq.mm(hollow type), 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, copper u type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 2.5 sq.mm, 6 sq.mm, terminals blocks (melamine housing) khaki color, 4 sq. mm, 32 amp., 600v, 10-20awg, screw type, din mounting, 6 sq. mm, 41 amp., 800v, 08-20awg, screw type, din mounting, 6-35 sq. mm, 125 amp., 750v, screw type, din mounting, 1.5-4sq. mm, 32 amp., 800v, 08-20awg, stud type, bolt connection, clip on din mounting, 35-50sq. mm, 125 amp., 1000v, clip on din mounting, wago make grey colour screwless , spring clamp, polyamide terminals for interpanel wiring , terminal:769-251, female plug:769-102 with add-on, modular timing relay,5a,2co,0.1s 100h,on-delay,230v ac, voltage-transducer, suitable for 24v dc power supply,i/p:0-500v ac,dual o/p(4-20ma), din rail mounted,, shunt resistor, 750a/60mv,0-60mv, shunt resistor, 175a/60mv,0-60mv, shunt resistor, 200a/60mv , 0-60mv, thermal overload relay,1.6a-2.5a, 3 pole, bi - metallic, 1 no + nc,, thermal overload relay,16a-25a, 3 pole, bi - metallic, 1 no + nc,, ac axial fan230 vac,50/60 hz 6"172x150x51 mm(model no rec-21725b2w) rexnord make or equivalent for 1:1 replacement, ac axial fan230 vac,50/60 hz 4"120x120x38 mm(model no rec-22038 a2t) rexnord make or equivalent for 1:1 replacement, transformer protection relay,i/p-4 nos of rtd sensors(pt-100),3 no of set points,0-300 temperature indication range,o/p-four relay contacts(01 c/o contacts),one analog 4-20 ma output contacts ,aux supply -90-270 v ac/dc,pecon make ,model no-tr-7570 or equivalent for 1:1 replacement, add-on auxiliary contact blo

CTN :41002886

31 Jul, 2025 NA

Mumbai - Maharashtra

Tender For 20bslc002 spares of various types of contactor and relays : - fuse carrier , electronic protection relays 12 5a 50a , red ind lamp complete unit for 230 v with built in resistor , green led(wide band led pilot light compl.unit 42 to 240 v ac , bimetal overload relay having relay range 25 36 a , d1 d2 d3 relay 4 no 4no 220v 380 ic 6 a 500 , motor protection relay , amber led indicating lamp with wide band voltage 42 220v , 6 way double door mcb distribution board for 3 phase incom , 1nc rear connection auxiliary contact for push button , contactor 3 pole relay 10a 230vac 50hz , timer range 3 to 12 sec , bimetal overload relay having relay range 4 6 3a , 1no rear connection auxiliary contact for push button , contactor 70a ac3 110v 50hz 2no 2nc , relay overload 0 25 1a , relay overload 8 16a three pole , bimetal overload relay having relay range 0 63 1a with adapt , bimetal overload relay having relay range 2 5 4a , red led indicating lamp with wide band voltage 42 220v , power distribution board 10 way db 415v 3ph , bimetal overload relay having relay range 20 32a

Central Government/Public Sector

CTN :40977593

29 Jul, 2025 NA

Parganas - West Bengal

Tender For tender for supply of smd components - rf fixed attenuator , signal conditioning signal tap rohs , rf wireless misc limiter / surf mount / rohs , low pass filter , flash micro-controller , rf mixer , low pass filter , lc band pass filter , signal conditioning , 4 way power divider , 8 way power divider , bias tee , bipolar transistors - bjt npn general purpose , monolithic amplifier , band pass filter , inverter , logic gates single , power line filters 28v , 0r res_0603 , 82 ohm_0603 , 137 ohm_0603 , 374 ohm_0603 , 2.2k-res 0402 , 2.2k-res 0603 , 680pf-cap 0603 , 2.7nf-cap 0603 , 10nf-cap 0603 , 0.1uf cap_0402 , 1uf cap_0402 , 4.7uf cap_0805 , 22uf-cap 0402 , 100uf cap_1210 , 18nh-ind 0603 , 22uh ind_2220 , rf choke , rf choke , 422ohm 0603 , 500 ohm 0603

State Government

CTN :40985778

28 Jul, 2025 1.80 Crore

Mohali - Punjab

Tender For purchase of sports physiotherpy lab equipments - focused shockwave therapy the device should be suitable for musculoskeletal use. should be a focused shockwave based on piezo mechanism. should have multi array type piezo electric hand piece. should have accuracy of the shock wave generation cycle(frequency)0~8 10% should have software-based operating system the unit should have large color touch screen for ease of operation. the unit should have accuracy of the operating frequency 0~7000shock 10% the unit should have maximum energy density 0.702 m j/ (when setting at 23 levels) 15% should have shock wave penetration depth 40 20%. should have maximum focus size. 78 1.78 15.81 20% should have maximum pressure 44.01 0.65 mpa the unit should be supplied with piezo hand piece and elastomer gel padas of 8 different sizes, 5mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, and 44mm. the life span of hand piece should be of up to 10 million shocks. should be supplied with trolley with castor wheels. dimension of the device should be approximated 500mmx700mmx 1000mm should have ce or usfda certified., high laser therapy should be class iv high level laser therapy system should have a real-time operating system technology should have maximum laser should be class iv high level laser therapy system should have a real-time operating system technology should have maximum laser power output of 15 watts should have wavelengths of 810 nm & 980 nm should have an aiming beam of 650nm, should have 2 operating modes: continuous wave or pulsed applicate and piece should have embedded finger switch and light, should have a technology to customize patient treatment based on conditions, body area, body type, skin type, chronicity and absorption characteristics applicator should have a fused silica composition massage ball at the point of contact of applicator and skin. pulse frequency: 2, 10, 20, 100, 200, 500, 1000, 2500, 5000 & 10000hz pulse duration: 50% duty cycle at any given pulse frequency setting, should have a 10 hd display touch screen with password protection to reach the home screen should be supplied with 2nos. of laser protection glasses power: 100-240v, 50-60 hz the unit should be supplied with 5 different types and sizes of treatment heads (large cone, large massage ball, flat window, small massage ball, and small cone. the unit should have inbuilt battery. electrical safety class: class i, type b weight should not exceed 4 kilograms (main unit; without applicators & accessories. must have class iii also., combination therapy machine with vaccum should have 3 independent electrotherapy channels, one ultrasound channel should provide multiple clinical waveforms including interferential (2 and 4 poles and isoplanarvector), tens (asymmetric biphasic &symmetric biphasic), han, russian, vms, surged(rectangular &triangular), hvpc, microcurrent, galvanic (continuous, interrupted and low level),rabert & dia dynamic cpid/cpiso should have independent parameter adjustments for each channel including intensity, frequency, duty cycle, vector scan, channel mode, phase duration, ramp, cycle time and treatment time based on waveform should have maximum output intensity up to 140ma should have constant current and constant voltage modes should have 2 colour coded lead wires for easy picking of selected channels should have suggested electrode placement guidelines ultrasound should offer 1 and 3 mhz frequencies should have the ultrasound bnr of 5:1 or lesser should be supplied with one 5cm applicator head should have pulsed & continuous frequency modes (10%, 20%, 50% & 100%) should have variable duty cycles of 16 hz, 48 hz &1 bb 00 hz should have facility to indicate applicator uncoupling should be able to use electrotherapy and ultrasound independently and also in synchronizedcombination of electrotherapy and ultrasound, where ultrasound head functioning as bothultrasound head and electrode should have minimum 7 high resolut

Power Divider Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government