Latest power factor controller Tenders | Government power factor controller Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

State Government

CTN :45243396

29 May, 2026 23.40 Lacs

Jaipur - Rajasthan

Tender For nit 107 work of providing, fixing and installing of automatic power factor control panel (apfc) for the period of 5 years under the jurisdiction of executive engineer, phed division paota

Central Government/Public Sector

CTN :45189157

03 Jun, 2026 1.77 Lacs

Vadodara - Gujarat

Tender For service and repair of automatic power factor correction (apfc) panel installed at electrical sub-station, cws vadodara by oem

corporations/Associations/Others

CTN :45245823

25 May, 2026 NA

Surat - Gujarat

Tender For supply of different type of electrical material for maintenance purpose at various muni. building of north zone (katargam)-tube light and accessories 4 ft. (1200 mm) tube fitting including 36/40 watt electronic ballast without tube rod only fixture , 4 ft. (1200 mm) tube light rod, light output 2450 lumens. , 4 ft. 18/20 watt led complete pvc t5 tube light lumen output , 2000/2100, luminary efficiency 100lm/watt , 2 ft. 08/10 watt t5 led complete pvc tube light lumen output , 800/1000, , 4 ft. 18/20 watt led complete aluminum body t5 tube light lumen , output 2000/2100, luminary efficiency 100lm/watt , 2 ft. 08/10 watt t5 led complete aluminum body tube light lumen , output 800/1000, , 4 ft. (1200 mm) tube fitting without led tube rod only fixture with , rotating type side holder , 4 ft. led t5 tube light rod, glass type 18/20 watt lumen out 2100, 1200 , mm luminary efficiacy 100lm/watt , 36 watt electronic ballast (choke) , tube light side holder simple , led tube light side holder (rotating type ) , lamp & halogen tube , light & accessories , 2.0 x 2.0 feet square 36/40 (watt) led fixture for indoor lighting or its , equivalent , 2.0 x 2.0 feet square 36/40 (watt) led fixture driver for indoor lighting or , its equivalent , 18/20 watt, led panel light (square/round), 1700 lumens , 20/24 led panel light size 1 x 1 inch , 12/15w led panel light (square/round), 1020 lumens , 50-55 watt led flood light fitting having efficacy 100lm/watt, cct 5000 k to , 5700k , 30-35 watt led flood light fitting having efficacy 100lm/watt, cct 5000 k to , 5700k , 120 watt led flood light fitting having efficacy 100lm/watt, cct 5000 k to , 5700k , led strip light & driver , celling fan & accessories , supply of 1200 mm sweep (48''),bee 5 star rated, ceiling fan with brush less , direct current (bldc)permanent territe magnet motor, class of insulation: b, , rust free 3 nos. aluminum blades,2 nos, canopies , shackle kit with earthing , provision, 22 guage copper winding, power factor not < 0.9, service value , cmm/w) minimum 6.85, air delivery minimum 215 cmm, 305 rpm , ceiling fan,(48''),1200 mm, energy efficient ,bee 1 star rated, high speed air , delivery ,minimum 218 cmm input power maximum 53 w , pedestal fan a.c. 230 v. 50 cy/s. 400 mm sweep oscillanting ,type and , adjustable ,height complete with guard regulator, & standard lead fleixble , wires and plug top 110 watt. , supplying & erecting single phase industrial pedestal fan suitable for , medium duty ring mounted low noise operation suitable for medium duty , having 450 mm dia size and maximum speed 1440 rpm 0.80 a,80 watt. , wall fan a.c. 230 v. 50 cy/s. 400 mm sweep oscillating ,type and adjustable , height complete with guard regulator, & standard lead flexible wires and plug , top , wall fan a.c. 230 v. 50 cy/s. 450 mm sweep oscillating ,type and adjustable , height complete with guard regulator, & standard lead flexible wires and plug , top , supplying & erecting single phase approved make industrial wall fan , suitable for medium duty ring mounted low noise operation suitable for , medium duty having 600 mm dia size and maximum speed 1440 rpm 0.80 , a,180 watt. , supplying & erecting single phase approved make industrial exhaust fan , suitable for medium duty ring mounted low noise operation suitable for , medium duty having 300 mm dia size and maximum speed 1350 rpm , supplying & erecting single phase apporved make industrial exhaust fan , suitable for medium duty ring mounted low noise operation suitable for , medium duty having 225 mm dia size and maximum speed 1370 rpm , supplying & erecting approved make low noise decorative exhaust fan , having square frame abs body with inbuilt lowers & square frame, having , 150 mm with 1350 rpm , supplying & erecting approved make low noise decorative exhaust fan , having square frame abs body with inbuilt lowers & square frame, having , 200 mm with 1350 rpm , supplying & erec

Central Government/Public Sector

CTN :45141051

21 May, 2026 NA

Ernakulam - Kerala

Tender For corrigendum : battery charging and discharging panel: supply and commissioning of digital signal processing (dsp) controlled igbt based ac to dc rectification (converter) with active power factor correction with finecontrol on voltage regulation, ripple, thd and improved efficiency with re-generative feature suitable to provide float charging and boost charging of ni-cd batteries of 199 ah/110 v capacity & lead acid batteries of 75 ah/110 v capacity as per specification no. c/e/els/ers/spec/06 attached. all meters and gauges to have valid calibration certificate from nabl approved lab. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45241980

21 May, 2026 NA

Ernakulam - Kerala

Tender For battery charging and discharging panel: supply and commissioning of digital signal processing (dsp) controlled igbt based ac to dc rectification (converter) with active power factor correction with finecontrol on voltage regulation, ripple, thd and improved efficiency with re-generative feature suitable to provide float charging and boost charging of ni-cd batteries of 199 ah/110 v capacity & lead acid batteries of 75 ah/110 v capacity as per specification no. c/e/els/ers/spec/06 attached. all meters and gauges to have valid calibration certificate from nabl approved lab. [ warranty period: 30 months after the date of delivery] ]

CTN :45233539

05 Jun, 2026 9.95 Lacs

Delhi - Delhi

Tender For tender for the annual comprehensive maintenance contract of automatic power factor controller (apfc) capacitor panels installed at pfcs corporate office building urjanidhi 1 barakhamba lane connaught place new delhi 110001.

CTN :45212508

05 Jun, 2026 NA

Delhi - Delhi

Tender For providing of customized amc/cmc for pre-owned products - tender for the annual comprehensive maintenance contract of automatic power factor controller (apfc) capacitor panels installed at pfc’s corporate office building “urjanidhi”, 1, barakhamba lane, connaught place, new delhi-110001

Central Government/Public Sector

CTN :45066673

21 May, 2026 NA

Hubli - Karnataka

Tender For battery charger and discharging panel : "supply and commissioning of digital signal processing (dsp) controlled igbt based ac to dc rectification (converter) with active power factor correction with fine control on voltage regulation, ripple, thd and improved efficiency with re-generative feature suitable to provide float charging and boost charging of ni=cd battery 199ah/110v capacity.the technical specifications are as per enclosed annexure. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45173385

18 May, 2026 NA

Mumbai - Maharashtra

Tender For e-tender for appointment of electrical consultant for the project supply, installation, testing and commissioning of low tension panel (lt), automatic power factor correction device (apfc) and diesel generator (dg) in shipping house, mumbai

Power Factor Controller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors