Latest power generation machine Tenders | Government power generation machine Tenders

State Government

CTN :39774105

29 Apr, 2025 NA

Saharanpur - Uttar Pradesh

Tender For corrigendum : repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; power house equipment, electrical system or installation; buyer; work for re-rolling of acsr zebra conductor at 220 kv sub-station badhaikalan as detailed in tender specification under electricity transmission division, muzaffarnagar.

corporations/Associations/Others

CTN :40131101

16 May, 2025 NA

Navsari - Gujarat

Tender For supply of 5kg and 3kg breather with silica gel for power transformer as per given technical specification for navsari transmission circle.

Private Sector

CTN :40095747

13 May, 2025 NA

Delhi - Delhi

Tender For request for proposal document for selection of bidder as transmission service provider through tariff based competitive bidding process to establish inter-state transmission system for transmission system for evacuation of power from pumped storage projects in sonbhadra district, uttar pradesh is issued by rec power development and consultancy limited.

CTN :40106177

23 May, 2025 NA

Asansol - West Bengal

Tender For asansol division- underground cables for transmission of 25 kv power from dtps/gss to oyr/fp for both feeder lines.

Central Government And Public Sector

CTN :39827472

08 May, 2025 NA

Faridabad - Haryana

Tender For corrigendum : selection of solar power generators for setting up of 1200 mw (1.2 gw) ists (inter state transmission system) connected solar power projects with 600mw/2400mwh energy storage systems (ess) on anywhere in india basis under tariff based competitive bid

State Government

CTN :40072880

13 May, 2025 NA

Basti - Uttar Pradesh

Tender For supply of material and erection of equipments and structure for construction of 01 no. 132/33kv bay at 132kv sub-station harraiya under electricity transmission division-i, basti - supply, pale fencing, earthing 40 mm ms rod for main earthing, earthing 40 mm ms electrodes ( 3 meter longs), m.s. flat for earthing 75x10, m.s. flat for earthing 50x6, air conditioning system, two ton window ac with all accessories and stabilizer(not less than 5kva capacity) with installation, single tension fitting suitable for, acsr moose, acsr panther, single suspension fittings suitable for, acsr moose, acsr panther, pg clamp suitable for, moose/ moose, moose/panther, panther/panther, bus post clamp suitable for, panther, twin panther, moose, lightening fixture led luminaries type sl-di as per tech specifications, work, erection of main & auxiliary structure consisting of column. beam peak, mast etc and auxiliary structure of installation of cts, la etc. the job consists of shifting of all materials from store to site of erection and erection of structures as per drawing with the help of gi nut & bolts, flat & spring washer with matching the hole, cutting & matching of member if required, including cost of all men and t&p excluding gi structure nut & bolts to complete the work. gi structures, nut & bolts and washer will be provided by department free of cost., erection of 145 kv equipments, 145 kv bus/line and tandom isolator, 145 kv current transformer, 145 kv post insulator, 120 kv lightening arrestor, 145 kv ct junction box, 132 kv transformer (c&r) panel, 145 kv sf-6 circuit breaker, erection of 33 kv equipments, 33 kv vacuum circuit breaker, 33 kv isolator, 33 kv current transformer, 33 kv lightening arrestor, 33 kv ct junction box, stringing of three phase jack bus 132 kv with panther conductor. the work includes cutting & bending of conductor, fixing of single/double bolted type tension fitting/suspension. hoisting of disc insulators and shifting of material from store*site to erection site and all other associated work to complete the job satisfactorily as per instruction of engineer incharge., 132 kv jack bus for transformer, 132 kv making of u jumpers, equipments interconnection jumpering with main bus bar. job includes bending of conductor in proper shape tightening with the help of clamps and all other associated work to complete the job., transformer bay for 132 & 33 kv side, laying and termination of following size control cable in trench/cable trays from different control room c&r panels to switchyard equipments (132/33 kv cb, ct their junction boxes . transformer marshalling etc) in 132/33 kv switchyard as per cable schedule including carriage of cable drum from store and all other associated work., 2cx2.5mm2, 4cx2.5mm2, 6cx2.5mm2, 10cx2.5mm2, termination of control cable ( per termination), cutting strengthening bending and laying 700 mm/500 mm below inside ground and above ground of following size m.s. flat for earthing of main and auxiliary structure and equipments including welding with main earth mat and with objects to be earthed, excavation trenches and back filling painting and all other associated work as required to complete the work satisfactorily. m.s. flat will be providing by the contractor free of cost., 75x10 mm, 50x6 mm, making delta earthing of 120 & 33 kv la by fabrication of 03 nos 3 mtr m.s. round bar ( 36/40 mm dia) electrode it piercing inside the ground and connecting all 03 nos electrodes with 36/40 mm m.s. round laying around as per drawing painting the jointing with 75x10 mm m.s. round bar laying around as per drawing. painting the joints with black japan paint of good quality after proper cleaning of joints by wire brush ms round bar will be provided by dept, free of cost., dismantling of 250k.va 33/0.4k.v station t/f work includes opening of jampers/cable connection/cutting of earthing etc., laying of 300/400mmsq. 3.5core power cable from control room t

CTN :40082116

05 May, 2025 NA

Doda - Jammu And Kashmir

Tender For supply of spares/ stores/t&p/equipments/hardware items required from time to time for day to day operation/ maintenance/construction of power sub-transmission network of this division during the financial year 2025-26 or till the next rate contract - disc insulator 70kn b&s type, anti fog (reputed make/ already use in pdd), 33kv single tension disc fittings [3 bolts] suitable for dog conductor suitable for b&s 70kn disc insulators, 33kv pin insulators (porcelain) 70kn, 33kv g.i. pins (heavy duty), 11kv, 3 core cable kits [heat & shrinkable], a. indoor type, i) 600 mm. sq.single core, i. 400 mm sq., ii. 300 mm sq., iii. 240 mm sq, iv. 185 mm sq, b. outdoor type, i) 600 mm. sq.single core, i. 400 mm sq, ii. 300 mm sq, iii. 240 mm sq, iv. 185 mm sq, 11kv link set [heavy duty] 50*6 mm ( clamping suitable for dog conductor), 11kv l.a [station type]reputed make, 11kv l.a [line type] reputed make, guy wire 7/3.15mm, 33kv guy insulators, manila rope, i) 3/4 inch dia, ii) 1 inch dia, p.p.rope 3/4 dia, m.s. nut & bolts of sizes, i. 3" (full thread), ii. 6" (half thread), iii. 9" (half thread), iv. 10" (half thread), nuts and bolts brass, cork sheet 8mm, aluminum thimbles of sizes, i. 400mm sq, ii. 300mm sq, iii. 240mm sq, iv. 185mm sq, v. 120mm sq, drill bit [heavy duty], i. 16mm dia, ii. 19mm dia, iii.26mm dia, p.g clamps, i) suitable for panther conductor, ii) suitable for dog conductor, p.i clamps [suitable for dog conductor/panther], t clamps [suitable for dog conductor,panther ], brass bush rods of 33/11kv power transformer of sizes, i. hv [m20], ii. lv [m20], 33kv porcelain bushes of 33/11kv power transformer of sizes, i. hv side, ii. lv side, 3 core 11kv xlpe cable, i) 600 mm. sq., i. 400mm sq, ii. 300mm sq, iii. 240mm sq, iv. 185mm sq, v. 120mm sq, copper strip 20x3mm, vacuum interrupter suitable for, i. 11kv (yamuna] breaker, ii. 11kv [pascal] breaker, iii. 11kv (stelmec] breaker, iv. 11kv [schneider] breaker, iv. 11kv [electrifield make]breaker, aluminum bus bar 75x10mm, duck back shoes of different sizes, red oxide enamel paint (asian, nerolac/ berger), al. paint (asian, nerolac/ berger), 1.1kv voltage grade 2.5mm2 copper conductor, pvc insulated control cable conforming to is: 1554-1998, i. 2 core, ii. 4 core, iii. 5 core, iv) 8 core, iv. 10 core, v) 12core, 33kv current transformer of ratio, i. 750/375/5-5-5a, ii. 600/300/5-5-5a, iii. 400/200/5-5-5a, 33kv lightning arrestor [station type] reputed make, 33kv isolators with earthing blade, insulating hand gloves make crystal etc tested for 33kv level, aluminum ladder 9mtr long (folding), bamboo ladder 20 ft long, rubber mat 1mtr x2mtr, 12mm thick, 11kv operating rods, galvanised nuts and bolts of sorts, g.i wire 8 swg, lifting pulling machine 3 ton (make power ,wolf or any standard make), g.i earthing plates 2x2x6mm, pliers (taparia or any standard make), safety vest, safety belt, safety helmet (isi marked), 33kv danger plates complete, multimeter ( standard company make motwane , waco, etc), digital ampere meter [0-200/400 amps.], male contact (crompton greaves & emi make panel), female contact (crompton greaves & eim make panel), tripping coil suitable for 30/36v dc along with plunger for allind, bieco, make breaker, relays digital for vcbs for allind, bieco, easun,electricfield make panel, earth fault relay for vcb/ocb crompton greaves & emi make panel, over current relay for crompton greaves & emi make panel, 11kv ct set for breakers, i) 400-200/5 - 5amp, ii) 600-300/5 - 5amp, iii) 750-375/5 - 5amp, welding electrodes swg 8no as per is: 814 of 2004, maintenance free battery banks 36v ,vrla bank comprising of 18nos of cell [2 volt.100ah cell each] with tray and trolley of hbl,exide or any other reputed make, battery cells 2 volt,100ah(wet cell ) exide make, battery cells 2 volt,100ah (dry cell) exide make, master trip relay b24,110/125 v dc, guy rod complete with turn buckle, straining screws, guy plate etc [20mm] for 33 kv lines, transf

CTN :39893782

07 May, 2025 137.43 Crore

Chitrakoot - Uttar Pradesh

Tender For corrigendum : 220kv ais substation package for construction of two pooling substations (pss1 and pss2) of 33/220 kv capacity and 220 kv transmission lines up to 220kv side (incomer) of 220/400 kv grid sub-station (gss) to evacuate power from 500mw and 300mw capaci

CTN :39038232

01 May, 2025 13.18 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin mechanic motor vehicle (mmv) tradeat iti tarsali, gujarat, india (package 3: mmv trade) - alternator assembly used for lmv working condition demonstration kit , starter motor assembly used for lmv working condition demonstration kit , electronic engine control module , fuel pump for mpfi working condition demonstration kit , inline fuel injection pump and rotor type fuel injection pump , demonstration board of 2wheeler ignition system. , demonstration board of electronic ignition system. , working condition of petrol mpfi engine assembly with fault simulation board , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , demonstration board of mpfi system , ultrasonic injection cleaning equipment , working model of power windows , petrol engine motorcycle/scooter along with special tools and accessories , four stroke multi cylinder diesel engine in working condition , four stroke four cylinder crdi diesel engine in working condition , functional/experiment model of different type of sensors. , auto electrical test bench , cut section model of mock layout of a motor car -electrical system - working model , cut section working model of single plate clutch assembly. , cut section working model of diaphragm clutch assembly. , cut section working model of centrifugal clutch assembly. , front axle ( rezeppa joint) with stand for dismantling and assembly , rear axle with stand for dismantling and assembly , cut section model of synchronous gear box working , cut section model of sliding mesh gearbox working , cut section model of constant mesh gearbox working , full floating axle and semi- floating axle assembly , cut section working model of automatic transmission gear box , steering assembly - , 1. rack& pinion, , 2. worm& roller , 3. recirculating ball , 4. power steering , wheel alignment set up instrument-computerized , brake testing equipment (to test efficiency of vehicle where motion after braking is plotted) , motor vehicle in running condition (diesel heavy) with hydraulic power steering , light motor vehicle diesel crdi with electronic power steering and car a/c , engine dynamometer , four stroke multi cylinder engine mpfi petrol with cng kit set up in running condition , four cylinder four stroke diesel engine test rig with rope brake dynamometer , exhaust gas analyzer - diesel , training setup for adas systems , 4-wheel alignment set & hoist with advanced driver assistance systems (adas) complete frame targets , steel toolbox with lock and key (folding type) , punch letter , outside micrometer (0 25) , outside micrometer (25 50) , outside micrometer (50-75) , outside micrometer (75-100) , inside micrometer (25-50) , depth micrometer (0-25) , thread micrometer , adjustable micrometer sprit level to measure flatness, indication and taper with prismatic measuring base , vernier caliper , digital vernier caliper , vernier depth gauge , vernier bevel protractor, least count 5minutes , telescope gauge , dial test indicator plunger type (complete with clamping devices and stand) , universal surface gauge , cylinder bore gauge , compression testing gauge suitable for petrol engine. , vacuum gauge , granite surface plate , work bench , spanners socket with speed handle, t-bar, ratchet and universal , magneto spanner set , cylinder ridge cutter , vice grip pliers , torque wrenches , pneumatic tools set , car jet washer , pipe flaring tool , pipe cutting tool , universal puller for removing pulleys, bearings , stud extractor set of 3 , stud remover with socket handle , paraffin pressure gun , hand reamers adjustable , straight edge gauge , straight edge gauge , ladle , electric soldering iron , wire gauge (metric) , digital multi meter, 3 % digit (min), diode test mode and continuity mode, , growler , hydrometer , battery analyzer with printer , carburetor - solex, mikuni for dismantling a

corporations/Associations/Others

CTN :39712589

30 Apr, 2025 35.40 Lacs

Jamnagar - Gujarat

Tender For corrigendum : bi-arc for the emergency restoration of power of 66kv,132kv & 220kv transmission line on tower and h-frame structure ( re-invite).

Power Generation Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Private Sector

Central Government And Public Sector

State Government

corporations/Associations/Others