Latest power pallet Tenders | Government power pallet Tenders

CTN :41101150

06 Aug, 2025 NA

Ernakulam - Kerala

Tender For custom bid for services - defect rectification of acsr 2 (south tower)-defect., in has reported that tracks are not available on display of acsr #2., defect identification., di for the same was undertaken on 13 jun 2025. it was found that the pedestal unit, was required to be replaced to rectify the defect., scope of work to undertake defect rectification., 1. spare part., the required pedestal unit for replacement will be provisioned by in on site. all other, components/ units of acsr #2 should be in place to operationalize the system., 2. manpower., three skilled technicians will be required to undertake the pedestal replacement work., one tower climber also needs to be available on site. the tower climber and two, technicians will be provisioned by hela., 3. material/ machinery., one overhead crane with a loading capacity of one ton lifting to a height of 35 mtrs is, required to undertake the work. the same will be provisioned by in., 4. tools and accessory., the following are required and will be provisioned by hela:-, (a) torque wrench, (b) level indicator, (c) eye hook -02, (d) two 50 mtrs rope, (e) silicon, (f) drill machine, (g) lubricant, (h) slings for lifting, 5. activity to be undertaken., the sequence of events for replacement of pedestal unit will be as tollows:-, (a) disconnect and remove all cables, wave guide ard units from the antennae assembly., (b) fitment of lifting eye hook on antenna and pass lifting slings to the eye hook. dismantle antenna from pedestal unit and keep it on even surface on, the ground with the help of overhead crane. special care is o be undertaken while handling waveguide., (c) hook on the pedestal unit on overhead crane and op an securing bolts, of pedestal unit. lift the pedestal and move to the ground with cap closed of all connectors., (d) hook up new pedestal and lift it to the tower top and w hen aligned with, the position of pedestal plate lower the pedestal on the plate and tight the nut, bolt with level indicator on top of the pedestal to confirm tht the same is at, zero level., (e) lift the antenna to the top of tower and fix it to the pede stal unit., (f) install all units of acsr on top of tower and fix connectors and waveguide to the antenna., (g) switch on power and carry out power checks and fo (hecks., (h) switch on the acsr server and carry out alignment of system to get the tracks appeared on the display., 6. safety., all man working on tower should wear safety belt, safety helmet and safety belt to be, tied on two rigid point at tower top. the man below tower for handlin activity should, wear helmet. the antennae assembly and pedestal unit should be se cured with twopoint safety rope while lifting and lowering the same to avoid any dan age to the man, and material view heavy wind, lifting jerk or swing of the crane sling., .

CTN :40821460

24 Jul, 2025 NA

Multi City - Rajasthan

Tender For corrigendum : requirement of safety, rescue and security items for ssctps fy 2025-26, suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap, gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch), barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5, chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160, acid/ alkali proof gloves having size of 18 inch with palm m, normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton, fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics, safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white, safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green, impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003, foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592, carry sheet ( stretcher)l x b: 212 x 75 cm with self weight 1 kg , load limit 159 kg , lift type: horizontal, wind indicator made of light weight pu coated nylon material. double stitch at all joints. plastic eyelets gives anticorrosion proper ties. the complete wind sock comes with a polymer packing. 2 dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe., ear plugs corded epsav-570, nose/ dust mask rpsav -p2, flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164, vapour respirator with head stripes to accommodate twin cartridges with exhalation valve, safety net consisting of pp rope dia: 4mm, mesh size: 100 mm,outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr, ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a), heat shield hand gloves made of normal and tannedsplit leather of reddish brown colour. insulating thermalbarrier as inner layer gives heat protection upto 250 degrees.thumb re inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344, insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991, electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991, hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350 c temperature.it should be atira tested for 250 c splash, tested to iso 5025,9151,6942,9185 and en 1875-3, chemical splash goggles with indirect ventilation, protect against splash and a hard coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003, chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003, elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv, chemiflex latex gloves, length-300 mm, en size- l coating m

CTN :41091157

31 Jul, 2025 7.36 Lacs

Ranebennur - Karnataka

Tender For supply of for material for nrlm shed work site at karur gp under mgnrega scheme - tmt bars fe 500_ nrlm work site at karur gp, portland cement_ nrlm work site at karur gp, ceramic tiles 30 x 30 cms_ nrlm work site at karur gp, reeded glass 3 mm thick_ nrlm work site at karur gp, vitrified tiles 600x600 mm_ nrlm work site at karur gp, white cement_ nrlm work site at karur gp, cast iron spike_ nrlm work site at karur gp, anchor bolts 750mm_ nrlm work site at karur gp, solid concrete blocks 40 20 20 cms 5 n sqmm_ nrlm work site at karur gp, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia_ nrlm work site at karur gp, pvc pipes 10kgf / sqcm 90mm outer dia_ nrlm work site at karur gp, teak wood beading 20 x 20 mm_ nrlm work site at karur gp, casurina poles 100 - 150 mm_ nrlm work site at karur gp, tools and plants at 2% on material_ nrlm work site at karur gp, tools & plants and electrical charges at 2%_ nrlm work site at karur gp, add brush at 1% on cost of paint_ nrlm work site at karur gp, add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint_ nrlm work site at karur gp, add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material_ nrlm work site at karur gp, add cement sand and grit 1% on material_ nrlm work site at karur gp, add 5% for fittings and wastage charges_ nrlm work site at karur gp, handling loading and unloading 3% on material_ nrlm work site at karur gp, labour charges for lifting and placing in position and making connection at 7% on material_ nrlm work site at karur gp, add brush, putty, sand paper, roller at 5% on cost of paint_ nrlm work site at karur gp, add brush, putty, glue at 5% on cost of paint_ nrlm work site at karur gp, add 15% wastage_ nrlm work site at karur gp, add 5% wastage charges_ nrlm work site at karur gp, add cutting and other wastage 5%_ nrlm work site at karur gp, add providing and removing scaffolding at 3% on labour_ nrlm work site at karur gp, add handling , loading and unloading at 1% on material_ nrlm work site at karur gp, add handling , loading and unloading at 2% on material_ nrlm work site at karur gp, add watering charges at 1 % on material_ nrlm work site at karur gp, enamel metal paint_ nrlm work site at karur gp, ready mix primer paint (ready mix red lead paint)_ nrlm work site at karur gp, polyenthylene water storage tank of specified capacity l_ nrlm work site at karur gp, enamel paint_ nrlm work site at karur gp, dry distemper_ nrlm work site at karur gp, binding wire_ nrlm work site at karur gp, plasticizer / super plasticizer_ nrlm work site at karur gp, ms plates 40 x 6 mm _ nrlm work site at karur gp, ms square rod 16 x 16 mm _ nrlm work site at karur gp, ms plate 12 mm x 6 mm _ nrlm work site at karur gp, base plate / base plate_ nrlm work site at karur gp, gusset plates 6 mm thick_ nrlm work site at karur gp, ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre_ nrlm work site at karur gp, ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at 4.5 kg per metre_ nrlm work site at karur gp, whitening_ nrlm work site at karur gp, hom of cutting and grinding machine - 1_ nrlm work site at karur gp, mixer (concrete small used in culvert)_ nrlm work site at karur gp, add_ nrlm work site at karur gp, unit cost as per the specification_ nrlm work site at karur gp, lead or pvc connection pipe 32mm dia (for wash basin)_ nrlm work site at karur gp, c.i. / m.s. brackets for flushing cistern_ nrlm work site at karur gp, brass stop cock_ nrlm work site at karur gp, cp brass waste 32 mm of standard pattern_ nrlm work site at karur gp, cp brass chain with plug_ nrlm work site at karur gp, copper plated brass piller tap 15mm_ nrlm work site at karur gp, white vitreous china clay flat back wash basin size 550x400mm_ nrlm work site at karur gp, vitreous china orrisa type w.c. pan size 580 mm_ nrlm work site at karur gp, mechanic class ii/mechanic hmp grade i/eme grade_ nrlm work site at karur gp,

Central Government/Public Sector

CTN :41074584

05 Aug, 2025 28.52 Lacs

Nagpur - Maharashtra

Tender For providing of custom bid for services - as per scope of work/ tender for outsourcing of handling of material for divisional store depot and divisional scrap depot, nagpur for the period of 02 years and tender for outsourcing of cleani..

Central Government/Public Sector

CTN :41090053

25 Jul, 2025 NA

Bhilai - Chhattisgarh

Tender For support services for cleaning, washing, greasing, oil filling, diesel filling, material handling, cleaning work areas of garage and equipments of hirri dolomite mines.

CTN :40808350

17 Jul, 2025 13.22 Lacs

Ganganagar - Rajasthan

Tender For requirement of safety, rescue & security items for ssctps fy 2025-26,suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap , gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch) , barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5 , chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160 , acid/ alkali proof gloves having size of 18 inch with palm m , normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton , fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics , safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white , safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green , impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003 , foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592 , carry sheet (stretcher) l x b: 212 x 75 cm with self weight 1 kg, load limit 159 kg, lift type: horizontal , wind indicator made of light weight pu coated nylon material. double stitch at all joints. , plastic eyelets gives anticorrosion proper-ties. the complete wind sock comes with a polymer packing. 2" dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe. , ear plugs corded epsav-570 , nose/ dust mask rpsav-p2 , flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164 , vapour respirator with head stripes to accommodate twin cartridges with exhalation valve , safety net consisting of pp rope dia: 4mm, mesh size: 100 mm, outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr , ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a) , heat shield hand gloves made of normal and tannedsplit leather of reddish-brown colour. , insulating thermalbarrier as inner layer gives heat protection upto 250 degrees. thumb re-inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344 , insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991 , electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991 , hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350c temperature.it should be atira tested for 250c splash, tested to iso 5025,9151,6942,9185 and en 1875-3 , chemical splash goggles with indirect ventilation, protect against splash and a hard-coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003 , chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003 , elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv , chemiflex latex gloves, length-300 mm, en si

CTN :41024712

25 Jul, 2025 6.41 Lacs

Multi City - Karnataka

Tender For for the procurement of school compound work cuntsruction of various materials gp uppanasi - display board / cib_1upi, lumpsum material_1upi, painter class i_1upi, add brush, putty, sand paper at 2 percentage on cost of paint_1upi, water proofing cement paint_1upi, add providing and removing scaffolding at 3 percentage on labour_1upi, add handling , loading and unloading at 1 percentageon material_1upi, casurina poles 100 to 150 mm_1upi, brick_1upi, add formwork at 4 percentage out of material and labour_1upi, mason class i (with tools)_1upi, broken granite metal 10 mm_1upi, granite metal 20 mm_1upi, granite metal 40 mm_1upi, mixer (concrete small used in culvert)_1upi, bond stone 20 x 20 x 45 cm_1upi, rubble stones_1upi, add watering charges at 1 percentage on material_1upi, mixer (concrete) 1 cum capacity_1upi, portland cement_1upi, coarse sand (zone iii)_1upi, broken stone aggregate 12 mm to 10 mm size_1upi, broken stone aggregate 20 mm size_1upi, broken stone aggregate 40 mm size_1upi

Central Government/Public Sector

CTN :41025362

25 Jul, 2025 NA

Durg - Chhattisgarh

Tender For providing of manpower outsourcing services - man-days based - support services for cleaning washing greasing oil filling diesel filling material handling cleaning work areas of garage and equipments of hirri dolomite mines; unskilled; support services for cleanin..,manpower outsourcing services - man-days based - support services for cleaning washing greasing oil filling diesel filling material handling cleaning work areas of garage and equipments of hirri dolomite mines; skilled; support services for cleaning ..

Central Government/Public Sector

CTN :40994156

24 Jul, 2025 NA

Asansol - West Bengal

Tender For tender description : fabrication, procurement, testing, loading, transportation, unloading, painting and supply of steel structures, erection, storage, watch and ward of fabricated steel structures, cladding work including supply and erection of sheets, grouting alongwith storage, watch and ward of material etc. required on behalf of m/s sms_i_ for coal handling facilities for stamp charged cob-12 site of iisco steel plant _sail-isp_ at burnpur, asansol _wb_.

Central Government/Public Sector

CTN :41019022

30 Jul, 2025 NA

Harnaut - Bihar

Tender For supply of movable material handling bin with door & handle for bogie assembly work station, size len gth 1300 mm, breadth 1100 mm, height- 2500 mm), material- ms channel/plate (2 mm/4 mm/5 mm), nos. of wheel -4 nos. description, specification/drawing asper annexure-"c". [ warranty period: 30 months aft er the date of delivery ]

Power Pallet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector