Latest power rail Tenders | Government power rail Tenders

Central Government / Public Sector

CTN :40837326

08 Jul, 2025 NA

Gooty - Andhra Pradesh

Tender For supply of led based driver and assistant desk illumination lamp as per clw specn. no. clw/es/3/ 0042 alt.d. technical specifications : 1)operating voltage 18 to 30 v dc, with normal voltage of 24 vd c. 2) high and low glow swith has to be provided. 3) the lamp unit shall have inbuilt reverse polarity, over voltage trip, spike and surge protection. 4) mechanically the housing shall be as per clw spec. n o. clw/es/3/0042. alt.d ]

State Government

CTN :40771915

14 Jul, 2025 NA

Dumka - Jharkhand

Tender For supply of machine, equipment and others - list of machine and equipments, laproscopic hd camera brand - karl storz/conmed/olympustechnical specificationresolution: 1920x1200 pixes / 1900x1000 pixescable length: 300 cm, ultrasonic harmonic scalpelbrand - johnsontechnical specificationdimensions: (hxwxd) 5.3" 14.5"x15.2" voltage: 100-240 vac frequency: 50/60 hz rated current: 3 amp , ultrasonic harmonic scalpelbrand - valley labtechnical specification macrobipolar/bipolar: 473 khz sinusoid, 100% duty cycle. seal: 473 khz sinusoid pulsed , hand instruments for laproscopy brand- karl storz/ olympustechnical specification i) veress needle: it should be with spring action blunt style -12 cm: 1 no 10 cm: 1 no 8 cm: 1 no ii) trocar and cannula: 10 mm: 2 nos 7 mm: 1 no. 5 mm 6 nos it should consists of trocar, cannula with insufflation and multifunctional valve and must have pyramidal tip. iii) reducer/reduction sleeve 5 mm. 1 no iv) telescopes: 10 mm- 0 - 1 nos -30 - 1 nos 5 mm-30 1 nos rigid rod lens system provides good resolution and the better dept perception. it should have uniform image brightness and autoclavable. the 300 forward oblique angle and permits for greater latitude for viewing underlying areas under difficult anatomical conditions. v) suction cannula: 10 mm - 1 no 5 mm -1 nos vi) laparoscopic scissors: curved (monopolar metzenbaum dissector 5mm diameter): 1 nosstraight (bipolar): 1 nosperitoneal scissor: 1 nosvii) unipolar forceps (hook & spatula): 2 nos viii) bipolar forceps : 2 nos ix) atraumatic forceps: maryland dissector forceps: : 2 nos. fenestrated forceps: : 2 nos. x) needle holder (flat jaw) with handle : 2nos xi) monopolar cable (reusable):1 nos. xii) bipolar cable (reusable): 1 nosxiii) allis (double row of teeth) grasper: 1 nos xiv) aspiration needle: 1 nos. xv) reducer/ reduction sleeve (5mm): 1 nos xvi) grasping forceps (toothed & rachet 5mm): 2 nos xvii) laparoscopic knot pusher: 1 nos xviii) clip applicator (reusable): 5mm -: 1 nos : 10 mm: ino xix) uterine manipulator: 1 nos xx) clips( medium & large) xxi) drilling needle: 1 nosxxii) infiltration needle: 1 nos xxiii) biopsy forceps (toothed punch biopsy): 1 nos xxiv) myoma fixation screw: 2 nos xxv) tissue morcellator with base unit & accessories: 1 nos , dual wavelenght laserbrand- zeisstechnical specification laser type: diode, semiconductor wavelength : 1470nm+635nm max power: 15 watts/1470nm+5mv/635 aiming beam : 635nm/1, 4mw max or 515nm/2, 5mw max operation mode : continuous or modulated pulsed time : 0.05ms-1000ms beam delivery : sma905 connector optic fiber compatible : optic fibers having a core from 200um to 1000um, na=0.22~0.48 beam emission initiation : footswitch controller :microprocessor display : 10.1" ips with touch panel medical approved cooling : internal, air and thermoelectric cooling power supply of the laser: dc 24v/8.33a from the separate ac power supply of ac adapter : single phase 100-240va; 50-60hz, max 90w ac adapter dc 24v/8.33a medical approved laser dimensions: 27cm*24,5cm x 9cm laser weight: 2.75kg laser case dimensions : 53cm x 38cm x 23cm weight of laser with cases : 9kg environmental conditions during work : from +10 to 24 c degree, relative humidity from 30% up to 60% cass of medical device iib laser safety class 4 electric safety class i type b housing protection degree ip20b , hd camera setbrand- karl storz/ olympustechnical specification (i) hopkinsa forward-oblique telescope 30a, diameter 4 mm, length 30 cm, a utoclavable, fiber optic light transmission incorporated, color code ed : 1 nos(ii) telecam c3 : 1 nos(iii) image1 st hx one-chip full hd camera head, 50/60 hz, fixed focus, prog ressive scan, soakable, gas-and plasmasterilizable, focal length f = 16 mm, 2 freely programmable camera head buttons, for use with image1 x-link tc301, tele pack + and tp101 : 1 nos(iv) medical grade surgical monitor - fhd : 1nos(v) cold light fountain power led 175 scb, with integrated karl storz-scb, high-perfo

CTN :40800761

12 Jul, 2025 NA

Delhi - Delhi

Tender For supply of repair of photocopier machine and printers - supply and fixing of laser unit for photocopier machine model sharp ar 6020 , supply and fixing of upper fuser roller for photocopier machine model sharp ar 6020 , supply and fixing of cleaning blade for photocopier machine model sharp ar 6020 , supply and fixing of developer for photocopier machine model sharp ar 6020 , supply and fixing of key panel board for photocopier machine model sharp ar 6020 , supply and fixing of paper feed roller for photocopier machine model sharp ar 6020 , supply and fixing of main mother board for photocopier machine model sharp ar 6020 , supply and fixing of high voltage power supply for photocopier machine model sharp ar 6020 , supply and fixing of drum cartridge unit for photocopier machine model sharp ar 6020 , supply and fixing of control panel assembly for photocopier machine model sharp ar 6020 , supply and fixing of logic card of hp laserjet mono printer , supply and fixing of fuser unit of hp laserjet p 1108 printer

Central Government/Public Sector

CTN :40754419

28 Jun, 2025 8.87 Lacs

Chhindwara - Madhya Pradesh

Tender For supply of spares for ece make 11kv 400a hop 5 circuit breaker of sub station : - fixed contact assembly part no bd5114510 , epoxy ocb bushng 3-4 400- 630a w-mc plug part no pd5118195 , moving contact assembly part no bd5115551 , jaw contact assemblyset part no bd5114050 , auxiliary plug and socket assembly set part no bd5114850 , rotary switch w- link and fixing plate part no bd5119191 , shunt trip coil assembly part no 5111650ts , isolating spout assly with nylon shroud part no bc5119977 , e l rely w- dgtl dsply facilty part no ea5116610c , elr core balance current transformer part no ea5116650 , idmt rely set w- 2 o c and 1 e fault set part no ea5116561 , high speed tripping relay part no ea5116890 , under and over voltage relay part no ea5116591 , complete wiring set part no bd5115988 , indicating lamp fitting part no bd5115410 , power pack unit part no bd5115999 , copper connection y phase part no bd5118889y , copper connection r phase part no bd5118889r , copper connection b phase part no bd5118889b , 11kv gr 400- 630a hvy dty troly motorised part no bd5118271

Central Government / Public Sector

CTN :40762779

18 Jul, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply of led based driver and assistant driver desk illumination lamp as per clw specification no.clw/e s/ 3/0042 alt d or latest. technical specification:- 1) operating voltage 18 to 30v dc , with nominal voltage of 24 v dc. 2) high and low glow switch has to be provided. 3)the lamp unit shall have in built reverse polarity, over v o ltage trip, spike & surge protection. 4) mechanically the housing shall be as per clw specification no.clw/es/ 3/ 0042 alt d or latest. note: clw approved sources shall only participate in the tender or supplier offers shall be co nsidered with valid tender specific authorisation certificate from clw source shall be submitted along with their offer. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40306394

01 Jul, 2025 2.50 Crore

Ajmer - Rajasthan

Tender For corrigendum : supply of mini-truck/ van mounted fully automatic single phase centralized control unit cable fault locating equipment suitable for locating fault on low /medium / high voltage power cables up to 33 kv under tn-2029

Central Government/Public Sector

CTN :40763476

26 Jun, 2025 NA

Katni - Madhya Pradesh

Tender For supply of led based driver and assistant desk illumination lamp as per clw specn. no. clw/es/3/0042 alt.d technical sp ecifications :- 1)operating voltage 18 to 30 v dc with normal voltage of 24 v dc. 2)high and low glow switch has to be provi ded. 3)the lamp unit shall have inbuilt reverse polarity, overvoltage trip, spike and surge protection. 4)mechanically the housi ng shall be as per clw spec. no. clw/es/3/0042 alt.d or latest. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40639617

23 Jun, 2025 NA

Anuppur - Madhya Pradesh

Tender For corrigendum : supply of spares parts for ece make nflp oil circuit breaker 3point3kv 400a type hop 5 e e - fixed contact assembly 400a , arc control pot separator , carriage assembly , moving contact assembly , jaw contact assembly set , auxiliary plug and socket assembly complete set , lead screw assembly , rotary switch complete with link and fixing plate , operating mechanism complete set , shunt trip coil assembly , isolating spout assembly with nylon shroud , power pack unit 110v dc , heavy duty earth leakage relay with leakage display and cbct , idmt relay complete set with 2 over current , high speed tripping relay , under and over voltage relay , ocb tank partition

Central Government/Public Sector

CTN :39010847

20 Jun, 2025 18.13 Lacs

Nowrozabad - Madhya Pradesh

Tender For corrigendum : supply of fixed contact assembly 400a part no bd 4510 , arc control pot separator part no ek 6050876 , barrier part no ek 6050869 , insulated bolt big part no pd 420 , insulated bolt small part no pd 8296 , carriage assembly complete 400 630a part no bd 5550 , moving contact assembly part no bd 5551 , jaw contact assembly set part no bd 4050 , auxiliary plug and socket assembly complete set part no bd 4850 , guide pin big part no pd 4043 , guide pin small part no pd 3597 , lead screw assembly part no bd 4860 , operating mechanism complete set part no bd 4911 , rod holder assembly part no bd 4921 , shunt trip coil assembly part no 1650ts , isolating spout assembly with nylon shroud part no bc 9977 , elr core balance current transformer part no ea 6650 , power pack unit 110v dc part no bd 5999 , instrument chamber box complete with internal wiring including selector switches, indication lamps voltmeter, ampere meter, fuse base etc part no bdw 7771 , partition plate assembly part no bd 5255 , operating shutter assembly part no bd 5310 , gas van pipe part no bd 5589 , ocb tank partition part no bd 4711 , earthing bar contact part no bd 8810 , cable entry box part no bd 2290 , idmt relay complete set with 2 over current and 1 earth fault with instantaneous tripping high set part no ea 6561 , high speed tripping relay part no ea 6890 , assorted hardware part no bd 9295 , under and over voltage relay part no ea 6591 , heavy duty earth leakage relay with leakage display time lag facility and cbct part no ea 6641 , trolley complete with all accessories part no bd 8268 , rotary switch complete with link and fixing plate part no bd 9191 , complete wiring set part no bd 5988

State Government

CTN :40398381

24 Jun, 2025 NA

Guwahati - Assam

Tender For corrigendum : empanelment of agencies for supply of laboratory instruments for various water testing laboratories under jal jeevan mission, assam - ion meter with electrode and accessories for fluoridemeter: ph/ise benchtop meter with electrode stable, universal power adapter, literature, pc cable, meter test certificate electrode: ionplus fluoride and nitrate combination ion selective electrode, 1m cable, waterproof bnc benchtop ion meter (ise) along with fluoride, nitrate #electrode range: -2.000 to 20.000 resolution 0.1, 0.01, 0.001 relative accuracy 0.002 calibration points up to 5 calibration editing yes #mv/ rmv orp range 2500.0 mv resolution 0.1 relative accuracy 0.2 mv or 0.05 % of reading whichever is greater eh orp mode yes ise range 0 to 19999 resolution up to 3 significant digits relative accuracy 0.2 mv or 0.05 % of reading whichever is greater units ppm, m, mg/l, %, ppb, none calibration points up to 5 calibration editing yes calibration features timed end point, linear point to point, non-linear selectable auto-blank, low concentration range stability #temperature range -5 to 105 c, 23 to 221 f resolution 0.1 relative accuracy 0.1 offset calibration 1-point datalogging memory 2000 with time and date stamp log function manual, ready (include auto-read ), timed log edit delete individual points, group of points or all inputs ph electrode bnc, reference pin atc probe 8-pin mini-din #output rs232, usb power ac adapter included universal, 100-240 vac battery power optional 4 aas battery life 800 hrs, fluoride electrode of ion metersame make that of the ion meter, manifold filtration assembly* wide range of pumps and filtration flasks * high quality components * easily exchangeable elements *maintenance-free * low noise * added filters for enhanced pump longevity * filtration base with silicon stopper, cap & aluminium clamp connecting silicon tube technical specification for filtration flask set # high-pressure resistant tube # fiberglass filter membranes (47mm / 0.1 m) # ptfe disc filter #normal liquid filtration * specification for filtration glass set #suction bottle capacity(ml) 1000 ml # filter diameter(mm) 47/50 mm # * specification for filter flask * material: statinless steel 304, capacity: 300 ml (100 ml each) [ unit should consist of 3 flask so that 3 sample can be filtered simultanelously without any issue] # effective filtration area(cm2) = 9.6 cm2, outlet connector(mm) = 8 mm * specification for vaccum flask: #flow rate of the pump(l/min) = 17 l/minultimate vacuum(mbar) = 150 mbar # oil free, maintainance free, built in thermal protection to shut off when over heated., auto cut heater for distill water plant so that when water level decreases the heater is switch off automatically, voltage stabilizer capacity- 3 kva servo stabilizer 5 star rating, heating mantle (single station) should have digital energy regulator with multiple step power regulation automatic spill detection and saftey shutdown in built precision temperature control technial specification: flask capacity 250 ml, working temp range: ambiant + 5 to 420 degree celcius. accuracy: plus minus 1.0 degree celcius, power consumption : 150 w, heating mantle (combined unit) material of construction heating block: made with grade epoxy painted chemical resistant coating, aluminum block with 6 thermo wells for processing 6 different samples at a time. #racks: ss 316 # glassware: teflon coated # temperature range ambient + 10 deg c to 450 deg c # stability of temperature better than 0.5 deg c # controller consist of digital read out of temperature and time with 4 programmable ramps for each method. # number of programmable methods 20 numbers. # heating powers 1000w # heating position minimum 6 position # digestion time range -1 to 999 minutes # the system should have facility of acoustic signal at the end of completion of cycle to notify the operator. # the thermal digestion unit should have high thermal homogeneity # the setup should have small f

Power Rail Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors