Latest pre fabricated classroom Tenders | Government pre fabricated classroom Tenders

Central Government/Public Sector

CTN :41624803

10 Sep, 2025 NA

Kannur - Kerala

Tender For tice for supply & installation of printing materials converge id card-student-950 , converge id card-teacher-100 , converge id card-staff-200 , converge id card volunteers-200 nos service providers-175 , handbands-student , handbands teachers , handbands-staff , handbands volunteers-250 nos , placard-cultural walk , placard-transport committee , placard-any other requirement? , food coupons-student-5 times (950) , food coupons-teachers 5. times (38 for 18 centres + 62 nift kannur faculty and staff) , food coupons staff-5 times (38 for 19 centres 162 for kannur staff) , food coupons volunteers-250 nos-5 times (nift kannur students) , physical invitation card with cover , rulebook , 10 nos with silver embossing for cover page only and 10 nos with normal printing as per specifcations , event schedule/brochure-teachers , velcome note teachers , 17. university ground-student entrance - extreme end gate-direction, with gi frame and with fabric material with installation and the material should be taken back by the supplier , 18. university ground-big converge branding with gl frame and with fabric material with installation and the material should be aken back by the supplier , 19. university main stage sunshade covering with fabric material , 20. university main stage - background fabric material with gi frame and with fabric material with installation and the material should be taken back by the supplier , 21. university main stage - hand railing cover centre skirting with foam board with instilation and the material should be taken back by the supplier , 22. university main stage - hand ralling cover side skirting with instilation and the material should be taken back by the supplier , 23. university main stage-adjacent bleachers-wall foam boards with instilation and the material should be taken back by the supplier , 4. university main ground - green grill mesh barricades-skirting with branding with installation and the material should be taken back by the supplier , 5. university main ground - selfie point - indivisual/small group. fabric material with gl frame with installation and the material should be taken back by the supplier , 26. university main ground-backdrop wall photobooth-big groups , abric material with gl frame with installation and the material should be taken back by the supplier , 27. unniversity main stage-stage panels , fabric material with gi frame with installation and the material should be taken back by the supplier , standees to be placed in various points in and around campus. fabric material with gl frame with installation and the material should be taken back by the supplier , foam board display , fabric material display along with gl frame with installation and the material should be taken back by the supplier , auditorium backdrop with fabric material along with installation , cuboid totem structures alongwith gi fabrication , 2 foam boards of 2x2 ft sizes , foram boards of 4x2 ft sizes , the same should be inserted in the structures , nift campus-selfie point - individual/small group , fabric material along with gl frame and with fabric material with mstallation and the material should be taken back by the supplier , nift campus-backdrop wall photobooth - big groups , fabric material along with gi frame and with fabric material with stallation and the material should be taken back by the supplier , 10. nift campus map print-vinyl print , along with installation , flags-tall pole- , 20 nos at kannur university ground on rental basis , flags , nift campus-20 nos , handheld flags-20 nos , kannur university-20 nos , vertical hanging banner-foyer structure top edge- , horizontal banner above the auditorium gate with converge branding print , fabric material with installation , wayfinders installations-foamboards along with installation

Corporations And Associations And Others

CTN :41591919

24 Sep, 2025 NA

Babina - Uttar Pradesh

Tender For operation and maintenance of electro mechanical equipments of existing matatila intakewell 45 mld and 110 mld wtp at babina under augmentation and strengthening scheme distt jhansi - routine, periodically and breakdown maintinance of all equipments, associated accessories installed at various units at matatila head works including supply,opening and refixing, transportation , loading, unloading , t&p etc., matatila headworks, routine maintinance and servicing of 320 kva d g set including all necessary spares, oil, filters, diode and lubricant as per norms, repairing and overhauling of 650 lps discharge kirlosker make pumps with following works. model mf 40-45, dismantling, carting and re-installation of pump set including testing on load at site with all labour and t&p, supply and fixing of new ball bearing-6415 and oil seal., supply and fixing of new thrust bearing-51320m, fabrication, supply and fixing of fully balanced new pump shaft made of ss 410 as per sample., reconditioning of pump shaft with rematling, machining and balancing complete in all respect., reconditioning of pump impeller with rematling, machining and balancing complete in all respect., supply and fixing of new impeller for pump as per sample and zise, supply and fixing of new shaft sleeve, chuck nut made of ss 410 as per sample., supply and filling of lubricating oil in every 6 months, supply and fixing of new fastners, supply and filling of glande packing as per size and sample., supply and fixing of new glande plate with stud and nut., repairing & maintenance of kirloskar make induction motor with following works, dismantling, carting and re-installation of motor including testing on load at site with all labour and t&p, rewinding of 75 kw, 736 rpm, 3 phase induction motor with f-class insulated copper wire, nomax paper, sleeves, varnishing etc. complete with all material and t&p., rewinding of 55 kw, 736 rpm, 3 phase induction motor with f-class insulated copper wire, nomax paper, sleeves, varnishing etc. complete with all material and t&p., supply and fixing of new ball bearing-nu318c3, supply and fixing of new ball bearing-6318c3, fabrication, supply and fixing of new rotar shaft as per sample and material., reconditioning of rotar shaft with rematling, machining and balancing complete in all respect., reconditioning of bearing housing with rematling, machining and balancing complete in all respect., routine greasing of induction motor bearings with high temprature jelly grease in every 30 days intervals, supply and fixing of new fastners, supply and fitting of motor connection plate with suitable size of lugs as per sample etc. complete., repairing and maintenance of 600mm size sluice valve with following works, dismantling, carting and re-installation of sluice valve with all labour and t&p, supply and fixing of spendle for sluice valve made of ss 304 as per size and sample, supply and fixing of bush for sluice valve made of gun metal as per size and sample, supply and fixing of disc and body sheet for sluice valve made of gun metal complete with all maching and finishing, supply and fixing of glande plate with studs 600mm size sluice valve as per sample, supply and filling of glande packing as per size and sample, routine servicing of ht panel, 45 mld wtp, repairing and maintenance of 300mm dia size sluice valve at desluding with following works :-, repairing of desludging valve 300 mm dia spendle brass & gun metal, tefloan clf wheel, repairing and overhauling of sluice gate 500x500 mm size at backwash outlet with following works :-, dismentaling, carting, refitting and testing with all labour and t&p required at site, fabrication, supply and fixing of new threaded spindle shaft made of ss:316 as per size and sample, fabrication, supply and fixing of new bush made of gun metal and wage piece as per size and sample, fabrication, supply and fixing of new fix and moving sheet made of gun metal as per size and sample

Central Government And Public Sector

CTN :41694590

09 Sep, 2025 NA

Guwahati - Assam

Tender For supply of material for fabrication and i [supply of material for fabrication and installation of roof including consumables item to enhancing storage facility related to various upgradation work of lhb coaches as per annexure attached.]

State Government

CTN :41609531

16 Sep, 2025 3.50 Lacs

Katni - Madhya Pradesh

Tender For supply of fabrication material at dist jail katni---gi sheet 24 gauge 8’x4’,white 500 gm,iron repeat all sizes,iron rebar plain 6,8,10,12, mm,gi wire 16 no.,iron plain strip 4.5 inch, 1’’, 1.5’’,aluminum sheet 18 gauge,aluminum repeat all sizes,iron angle 25x 25x 1 thread,iron angle 30x30x 1 thread,iron angle 35x35x 1 thread,iron primer (01 litre),silver paint (01 litre),oil paint (01 litre),building rod,iron sheet sheet 8 x 4 x 1 thread,turpentine oil 01 litre,bearing (in different sizes),nut bolt washer of all types,grinder stone big no. 8,varma beat (for drilling iron) of all types,building holder,hand grinder stone small,building glasses,steel scissors (for cutting tin sheet),pana no. 24, 26, 30, 32,iron pipe square,gloves,gris (01 kg),

corporations/Associations/Others

CTN :41609012

08 Sep, 2025 38.79 Lacs

Chinchwad - Maharashtra

Tender For m and r to wss at pcia protection of cables by providing dielectric high strength composite material and other allied work at rawet pure water works - protection of cables by providing dielectric high strength composite material, supply installation testing & commissioning of grp trench cover with grp support structure and gi hardware for mounting support structure grating 38mm x 40mm x 40mm with 500 kg udl load bearing capacity @ 100 mm support span, providing of ss fabrication for ladder, cover, jali, pump foundation etc.

Central Government And Public Sector

CTN :41671337

23 Sep, 2025 NA

Multi City - Multi State

Tender For providing of custom bid for services - modification of door housing preparation of drawing material testing fabrication erection of ms shielding door lead shielding of duct piping and associated work at wip wmd barc trombay

Central Government/Public Sector

CTN :41596585

16 Sep, 2025 NA

Noida - Uttar Pradesh

Tender For design, engineering, procurement, fabrication, inspection, testing, transportation, and supply of the high pressure clamp seal ring connectors as per material requisition

State Government

CTN :41624547

12 Sep, 2025 20.14 Lacs

Multi City - Karnataka

Tender For dismantling the existing cooling water pump motor sets along with concrete bed. all the civil works like removing the priming pipes cement bedding, concrete foundations of pump motor sets at el 166 ft. turbine floor concrete foundation bedding works with suitable packets / opening for motor foundation bolts and pump foundation bolts and fabrication of metal frame structure for erection of motor as per detailed approved drawings of pump motor sets, leveling, curing etc. has to be carried out by contractor. supply and erection of new motors and kpcl issued pump, leveling proper alignment on concrete bedding to match the existing old suction and delivery pipes flanges with hardware, gaskets height of centerline of pump suction nozzle and delivery nozzle should match the existing suction pipe flanges and delivery pipe flanges centerline from foundation. necessary pipes, flanges, bends, gaskets, hardware for retrofitting works and gas cuttings, welding, flanges holes drilling if any should be carried out by the contractor. necessary gas cutting, nozzles, gas welding machines, welding rods concrete drilling / chipping tools other tools, tackles, chain pulley, pull lifts, terfers, cement, sand strengthening work of concrete with skilled technicians to be carried out. local transportation for transporting men and material to site to be arranged by contractor. all other works of erection, testing and commissioning as per site engineers directions should be carried out by the contractor as specified in detailed technical specification and scope of work furnished in section-iii- of bid document attached in the e portal.

CTN :41596334

23 Sep, 2025 12.00 Lacs

Shimla - Himachal Pradesh

Tender For rate contract for supply and installation of iec material in respect of cmo office shimla, district shimla for the period of 2025 to 2027 - standeesstar flex designing with multi color printing size 6ft x 2.25ft, standees with triangular stand star flex designing with multi color printing size 6ft x 2.25ft, flex bannersstar flex designing &multi color printing (rate per sq. feet), flex bannersflex pasting on 1 inch, ms square pipe frame with welding (rate per sq. feet), satin banner with printing rate per sq. feet, handbill ( single side printing ) coloured paper, double colour :size 5in x 8in ( 1/8) (paper 47gsm ) (rate per thousand), designing of a-4 size flyer (per flyer), handbill ( single side printing ) coloured paper, double colour :size 5in x 8in ( 1/4) (paper 47gsm ) (rate per thousand), handbill ( single side printing ) double colour/black & whitesize ( a/4) (paper 70gsm ) (rate per thousand), handbill ( single side printing ) multicolorsize ( a/4) (paper 75 gsm ) (rate per thousand), handbill ( single side printing ) multicolorsize ( a/4) (paper 120 gsm ) (rate per thousand), handbill ( single side printing ) multicolorsize ( a/4) (paper 180 gsm ) (rate per thousand), broucher (folders)double side printing a4 size double colour( paper75 gsm ) ( rate per thousand), broucher (folders)double side printing a4 size multicolour (paper 120gsm ) (rate per thousand), broucher (folders)double side printing a4 size- multicolour (paper 180gsm ) (rate per thousand), poster ( single sided printing )legal size double colour( paper75 gsm ) (rate per thousand), poster ( single sided printing )legal size multicolour (paper 120gsm ) ( rate per thousand), poster ( single sided printing ) with stickera3 size double colour (paper 75gsm ) per thousand, poster ( single sided printing )size 12-18 multicolour (paper 120gsm ) (rate per hundred with sticker), poster ( single sided printing ) with sticker/without stickera3 size multicolour (paper 120gsm ) (rate per thousand), poster ( single sided printing )size 19 x 28 multicolour (paper 90gsm )(rate per thousand), poster ( single sided printing )size 19 x 28 multicolour (paper 180gsm )(rate per thousand), poster ( single sided printing )size 18 x 24 multicolour (paper 130gsm )(rate per thousand), poster ( single sided printing )size 18 x 24 multicolour (paper 180gsm )(rate per thousand), calendar with tinningsize 19 x 28 multicolour (paper 130gsm )(rate per hundred), calendar with tinningsize 18 x 24 multicolour (paper 130 gsm )(rate per hundred), calendar with tinningsize 18 x 24 multicolour (paper 180gsm )/thousand, led running boarddata through key board (size-4 x1 ), led running boarddata through usb port (module) - size- 4 x 8 , invitation card (ivory paper ( 5x7) with envlelops)double colour (rate per 100), invitation card (ivory paper ( 5x7) with envlelops)multi colour (rate per 100), invitation carddigital printing-rate per piece, vinyl ( printing and designing )on sun board sheet 5mm (rate per sq. ft.), vinyl ( printing and designing )on 24 gauge iron sheet (rate per sq. ft.), name plates vinyl ( printing and designing on acrylic sheet - (rate per sq. inch ), fabrication of vehicle.hanging of frames both side including back & bonnet etc., pla card( size 1 x 1.5 )printing & designing of pla card on sun board sheet with wooden handle, pla cardprinting & designing of pla card on corrugated sheet., duty pass & i cardsmulticolored ( coloured photograph ), duty pass & i cardsprinting & designing of i card on fused pvc card with lanyard band. (bank debit card type), certificatemulti colour printing (rate per hundred), certificatemulti colour /digital printing- (rate per piece), certificatedigital multi colour printing with frame and lamination- (rate per piece), honour boardon acrylic sheet ( rate per sq.ft.), honour boardletters ( rate per sq. inch.), inauguration plateacrylic with raw mark golden sheet with boarder, inauguration plate granite with lettering

CTN :41641694

09 Sep, 2025 13.48 Lacs

Multi City - Karnataka

Tender For solid waste disposal unit construction work - ggg11075-add white lead paint gasket cement sand for making good the wall and floor at 2percentage on material, ggg11074-100mm s or p trap, ggg11073-indian type water closet of size 580 mm of specified make with footrests, ggg11072-pvc pipe of 10kg cum 140 mm, ggg11071-fabrication charges., ggg11070-cost of 6.5mm m.s. coil, ggg11069-transportation charges of materials beyond 5 km at 10percentage, ggg11068-rcc cap 1000 mm dia 100 mm thick, ggg11067-add brush putty sand paper roller at 5percentage on cost of paint, ggg11066-enamel paint, ggg11065-unit cost as per the specification, ggg11064-tools & plants and electrical charges at2percentage, ggg11063-add brush at 1percentage on cost of paint, ggg11062-enamel metal paint, ggg11061-hom of cutting and grinding machine, ggg11060-hom of welding and grinding machine, ggg11059-corbon electrodes, ggg11058-anchor bolts 750mm, ggg11057-base plate or base plate, ggg11056-gusset plates 6 mm thick, ggg11055-ms angle iron 40mm x 40mm x 6mm 23 mtr in length at 3.5 kg per mtr, ggg11054-ms angle iron 50mm x 50mm x 6mm 33.8 mtr in length at 4.5 kg per mtr, ggg11053-weld mesh 75 x 25 mm of 6g to 10g, ggg11052-broken granite metal 10 mm, ggg11051-broken granite metal 12.5 mm, ggg11050-mathi ornandi wood scantling, ggg11049-hom of machinaries for planing, ggg11048-add cutting and other wastage 5percentage, ggg11047-mathi ornandi wood planks for panels 25 mm thick, ggg11046-add providing and removing scaffolding at 3percentage on labour, ggg11045-painter class i, ggg11044-add wire brush fine steel wool putty sand paper at 3percentage on cost of paint, ggg11043-ready mix primer paint (ready mix red lead paint), ggg11042-add, ggg11041-welder grade i, ggg11040-fitter class i, ggg11039-z section, ggg11038-reeded glass 2 mm thick, ggg11037-tw beading for fixing glass, ggg11036-stays, ggg11035-hinges 5 inch heavy duty, ggg11034-handles, ggg11033-ms clamps, ggg11032-mullion section, ggg11031-t section, ggg11030-add handling loading and unloading at 1percentage on material, ggg11029-burnt bricks class 35 (non modular), ggg11028-binding wire, ggg11027-tmt bars fe 500, ggg11026-add watering charges at 1 percentage on labour, ggg11025-add sundries charges at 1 percentage on labour, ggg11024-stone chistler class ii, ggg11023-mason class ii (with tools), ggg11022-mason class i (with tools), ggg11021-mixer (concrete small used in culvert), ggg11020-boulders, ggg11019-bond stone 20 x 20 x 45 cm, ggg11018-size stone 20 x 20 x 25 cms, ggg11017-hom of vibrator 0.71 days, ggg11016-plasticizer or super plasticizer, ggg11015-add sundries charges at 2 percentage on material, ggg11014-casurina poles 100 - 150 mm, ggg11013-add handling loading and unloading at 2percentage on material, ggg11012-casurina poles 75 - 100 mm dia, ggg11011-jungle wood runners and planks, ggg11010-silver oak or equivalent planks 38 mm thick, ggg11009-add watering charges at 1 percentage on material, ggg11008-mixer (concrete) - 1 cum capacity, ggg11007-portland cement, ggg11006-coarse sand (zone iii), ggg11005-broken stone aggregate 12 mm to 10 mm size, ggg11004-broken stone aggregate 20 mm size, ggg11003-broken stone aggregate 40 mm size, ggg11002-over head & other miscellaneous charges, ggg11001-add sundries charges at 1 percentage on material

Pre Fabricated Classroom Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors