Latest precast bench Tenders | Government precast bench Tenders

Corporations/Associations/Others

CTN :45532318

30 Jun, 2026 19.50 Lacs

Kanchipuram - Tamil Nadu

Tender For repair and maintenance work of foot path and light arrangements,eb board,play materials and name board works in tnhb p-iii park at ward no.33 zone -4 in tcmc - eangaging of man power for cleaning weeds and bushes at lawn areas cutting plants and grass including all labour charges etc complete, gardener 5 days 6 nos, mazdoor ist class, engaging of ac electric grass cutter on hire basis including hire charges transport charges and all labour charges etc complete, supply and fixing of childerns play materials including cost and conveyance and fixing and proper alingenement charges etc complete, slider, 2 seater swing, 4 seater see saw, supplying and filling in foundation and basement with river sand in play area in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification., supply and fixing of light pole 4 metre length single bracket pole with base plate (250 x 250 x 6mm)76.10mm od x 3.65mm thick x 4000mm length etc.,completed, supply and fixing of 30w led street light fitting with led on out door fittings including cost and conveyance and fixing charges etc complete, supply and fixing of synthetic moulded compound box for street light with 16 a mcb and connecterincluding cost and conveyance and fixing charges etc complete box-735+16 a mcb sp and neutral -382, supply and fixing of 4 sqmm pvc unsheathed copper cable including cost and conveyance and fixing charges etc complete , supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 194, centering and shuttering charges for all pcc and rcc works using ms steel moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete, plain cement concrete 1;2;4 mix using 20 mm hbg iss metal including cost and conveyance of all materials and including all labour charges etc complete, supply and filling of on quarry rubbish 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete, cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard speci cation and as directed by the departmental of cers. -mixing by manual means, paving the oor with pre-polished concrete anti-skid tiles (required shape and design) of 20mm thick of approved quality and colour laid in accordance with is 1443 over a cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required cement slurry and mortar plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard speci cation and as directed by the departmental of cers. (the make and brand of the tiles should be got approved by executive engineer before use on works), supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification., supply and fixing of stone bench including cost and conveyance and fixing and proper alingenement charges etc complete, supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(twad sor 2025-26 unicode wd-m1471 clause 18.0 page n

Corporations/Associations/Others

CTN :45532288

30 Jun, 2026 15.30 Lacs

Kanchipuram - Tamil Nadu

Tender For repair and maintenance work of foot path and light arrangements ,eb board, play materials and name board works in rajagopal nagar park at ward no.51 zone -4 in tcmc - eangaging of man power for cleaning weeds and bushes at lawn areas cutting plants and grass including all labour charges etc complete, gardener, mazdoor ist class, engaging of ac electric grass cutter on hire basis including hire charges transport charges and all labour charges etc complete, supply and fixing of childerns play materials including cost and conveyance and fixing and proper alingenement charges etc complete, slider, 2 seater swing, 4 seater see saw, supplying and filling in foundation and basement with river sand in play area in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification., supply and fixing of light pole 4 metre length single bracket pole with base plate (250 x 250 x 6mm)76.10mm od x 3.65mm thick x 4000mm length etc.,completed, supply and fixing of 30w led street light fitting with led on out door fittings including cost and conveyance and fixing charges etc complete, supply and fixing of synthetic moulded compound box for street light with 16 a mcb and connecterincluding cost and conveyance and fixing charges etc complete box-735+16 a mcb sp and neutral -382, supply and fixing of 4 sqmm pvc unsheathed copper cable including cost and conveyance and fixing charges etc complete , supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 194, centering and shuttering charges for all pcc and rcc works using ms steel moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete, plain cement concrete 1;2;4 mix using 20 mm hbg iss metal including cost and conveyance of all materials and including all labour charges etc complete, supply and filling of on quarry rubbish 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete, cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard speci cation and as directed by the departmental of cers. -mixing by manual means, paving the oor with pre-polished concrete anti-skid tiles (required shape and design) of 20mm thick of approved quality and colour laid in accordance with is 1443 over a cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required cement slurry and mortar plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard speci cation and as directed by the departmental of cers. (the make and brand of the tiles should be got approved by executive engineer before use on works), supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification., supply and fixing of stone bench including cost and conveyance and fixing and proper alingenement charges etc complete, supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(twad sor 2025-26 unicode wd-m1471 clause 18.0 page no.105)

corporations/Associations/Others

CTN :45522996

29 Jun, 2026 9.66 Lacs

Jamnagar - Gujarat

Tender For providing, supplying & fixing of precast bench 415-nos. for dhrol nagarpalika including one years warrantee at, dhrol, dist: jamnagar under mla grant (year-2025-26)(second call)

CTN :45532259

21 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply of mechanical and electrical equipments - supply - mechanical lab equipments, single phase ac circuit kit for voltage, current and power measurement- 5a,300v, 300w/5a measurement of power by using various loads analog voltmeter 0-300v ac panel mountedanalog ammeter 0-5a ac panel mountedanalog wattmeter 1.5kw ac panel mountedsingle phase digital power monitor to measure powersingle phase ac lamp load 230v/5a 1kwpanel enclosure with hylam front panel with input/outputterminal outlets , mcb elcb trainer kit- 1 phase/3 phase, 2/3/4 pole, 3a-16a single pole mcb 2-5ampstwo pole elcb 30malamp load single phase 5amps panel enclosure and terminal outlets, four stroke petrol engine cut section model - single cylinder four stroke petrol engine cut sectional model with carburetor, spark plug, cut cylinder, piston, connecting rod, crank shaft, valve mechanism, cam shaft, timing gears and flywheel. all parts cut opened to study the components and its working provision to take values for valve timing. surface finish: painted and color coded for easy identification of components mounting: heavy-duty ms fabricated stand/base display type: static / dynamic demonstrationmodel, dc motor - type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armaturefeatures: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder - bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, bearing with shaft assembly - type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end coversmounting: bench-mounted / frame-mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit- the plummer block housing material: cast iron (grade fg 200 or equivalent).type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: groundcarbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., (a).sliding mesh gear box for dismantling and assembling - (a) max transmitted power 1to1.5hp, torque capacity- 40 to 200nm, number .of speed 3 to 6, gear module 1.5 to 2, sliding mesh gearbox gearbox type- sliding mesh forward gears- 3reverse -yes gear material -alloy steel lubrication- splash / oil gear teeth- spur typical gear ratios- 3.2:1 / 2.0:1 /1.3:1 input speed- 0 1800 rpm housing material- cast iron(b) constant mesh gear box cut section - constant mesh gearbox (cut section) gearbox type :constant mesh forward gears :4 gear teeth -helical / spur dog clutch type- sliding lubrication -oil sae 80w90 housing- cut section material -hardened alloy steeleducational features-labeled parts., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

CTN :45563670

20 Jun, 2026 NA

Bhavnagar - Gujarat

Tender For tender for rcc pipes , manhole , paver block , precast benches , building material , pvc pipeline , jcb , bore cable starter , submersible pump motor , labour works , cctv cameras , led street lights , door to door garbage collection , electric wiring cable and switch , etc for avaniya gram panchayat

CTN :45532917

26 Jun, 2026 11.70 Lacs

Calicut - Kerala

Tender For supply of furniture - steel wooden desk (180 x 40 x 75 cm) leg and frame with ms angle iron and top with hard wood plank, steel wooden bench (180 x 30 x 45 cm) leg and frame with ms angle iron and seat with hard wood plank, hard wood single draw table (90 x 60 x 75 cm), hard wood stool (45 x 45 x 45 cm), steel cabinet with locker, 4 fixed shelves (78 x 36 x 19 ) 20 gauge 4 locker, steel perforated visitors chair 3 seated , stainless steel dining table with top (180 x 45 x 75 cm), library bench - steel wooden bench (180 x 30 x 45 cm) leg and frame with ms angle iron and seat with hard wood plank, hard wood cot (180 x 75 x 45 cm) plank on top, steel wooden plain table leg and frame with ms angle iron top with hard wood plank (90 x 60 x 75 cm), steel visitors chair 25 mm round pipe cushion seat

CTN :45550312

22 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - ms scrap consists of cond old and discarded unserviceeable tools spanner pipe wrenches hammers off sizes ghan grease gun sprey cutting tools bits drill check ring screw drivers cutter pliers single edge saw (arra) hand drill machine bench vice chain kuppy hex frame blade crow bar level sprit tools power wrenches ball punch tip bicycle pump track measuring tool taping rod guage carbide tools grinding tools all type weight beam scale spray machine and track jack and other similar tools with or without nf and scrap jack anvil and anvil stant off sizes bench vice files and other various cond tools unfit for railway use lying in godown no. 16. [gst 18% hsn 72044900]

CTN :45551588

24 Jun, 2026 NA

Dehradun - Uttarakhand

Tender For supply of test bench pump mounting bracket , rotary pump bend spanner , ratchet combination wrech , clamp meter ms 2101 digital , inch socket , magnetic tray

State Government

CTN :45516075

22 Jun, 2026 6.90 Lacs

Ferozepur - Punjab

Tender For providing and supplying furniture in integrated public health lab at district hospital ferozepur civil works furniture - almirah 20 gauge sheet heavy duty made with ms sheet size 36x78x18 duly powder coated with multipurpose shelves, heavy lock superior quality, table size 6x3 made with 19 mm thick ply + 1mm sunmica with 1 side drawer and cabinet duly polished heavy locks with footrests, counter size 8x2 operate for 2 persons made with19 mm ply + 1mm sunmica with footrests and shelves for documents with one drawer for each person, waiting area chair 3 seater- supplying & placing three seater bench. the seat and back shall be made up of high quality cold rolled ms perforated sheet of 1.2mm thick, pressed and welded to form the shape. the seat and back electrostatically coated with epoxy powder and then cured under heat to allow it to form a skin. the armrest shall be made up of mild steel powder coated tube with 1.2mm thick. the base structure shall be supported by ms powder coated with 40-60 (dft). there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 440 10 mm(d) x 405 10 mm(h) from ground. overall height shall be = 775 10 mm, overall depth = 710 10 mm & overall width = 1765 10 mm., revolving chairs long back with tilt mechanism with arm rest(leather finished, hydraulic, with five castors, nickle polish base)

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

Precast Bench Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

Corporations/Associations/Others

corporations/Associations/Others

State Government