Latest precipitation tank Tenders | Government precipitation tank Tenders

State Government

CTN :45531870

18 Jun, 2026 2.22 Lacs

Kangra - Himachal Pradesh

Tender For a/r and m/o wss paprola in tehsil baijnath distt. kangra (hp) (sh :- providing installation testing and commissioning of 1.50 hp submersible pump set with allied accessories and providing fixing ms stand post and water tank at village kharanal at pamadu other location) estimated cost rs. 222720/-only earnest money rs. 4500/-only time limit one month cost of form rs. 350/-

CTN :45072222

18 Jun, 2026 NA

Goa - Goa

Tender For bid to ras repair, maintenance, and installation of plant systems equipments- frame work: ms / rcc, sheet, repair of control console to arrest ingress of water/ humidity by use of qty 20 rcc blocks of dimension 04 feet x 02 feet x 06 inches (height). 2.2 repair of roof of control console to protect against sun light towards ensuring controlled temperature which is required for electronic equipment held in it. the protective structure would consist of vertical square tubes of dimension 40 x 40 mm and length 128 feet clamped onto the side wall body of the container. a horizontal framework 25 x 25 mm of similar raw material (square tube of dimensions 40 x 40 mm, 178 feet length) shall be fixed onto these vertical rods. 2.3 repair of fuel tank. 2.4 repair of qty 02 mtb side platforms used for inspection and adjustment during ground run/ testing of engine. 2.5 provisioning of consumables for maintenance of dg set of the console.

CTN :45551640

29 Jun, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of sq mm single core with standard copper , wire 10 sqmm 2 core , angle holder with skirt obr white black , acrylic sheet size of 4 ftx3 ftx3mm , agg 20 mm , agg 40 mm , agg 80 mm , black paint , bricks red , cgi sheet 10 ft , cgi sheet 12 ft , cgi sheet 2400mm 8 ft , chain link mesh 50x50x2 mtr , distemper , drill machine adopter 8mm , floor coat terricotta , floor tile 400x400mm , gate valve 25mm , hdpe pipe 10mm , iron cutter blade 14 inch , ismb 150 of rsj 150 x 75mm 20 ft long , kero heater wicks large , ldpe sheet , paint brush 125mm , paint brush 2 inch , paint brush 3 inch , paint brush 4 inch , paint og , paint po red , pbs roll , pcc hollow block , pcc solid block , ply wood of size 8ftx4ft and 12mm thick , ply wood of size 8ftx4ft and 19mm thick , ragmall , red oxide primer , sand , sand bag , satin white paint , self taping screw 25mm , self taping screw 50mm , smoke grey paint , srt size 1270mm x 613mm x 180mm , srt size 1630mm x 613mm x 180mm , srt size 1700mm x 613mm x 180mm , stainless steel lavotary pan , steel door size 900 x 1800mm , surf powder , synthetic enamel paint colour golden brown in 20 ltr container , synthetic enamel paint colour yellow in 20 ltr container , tape insulation 2 cm , tarpaulin canvas 30 x 30 ft , tarpaulin plastic 20 x 20 ft , tarpaulin plastic 30 x 30 ft , tile 300x300mm , tmt steel bar 10 mm , water storage tank 1000 ltr , water storage tank 2000 ltr , water storage tank 500 ltr , white paint , zypsum screw 25mm ms screw 25mm of 100 nos per pkt , ply wood grade bwp of size 6ftx 3ft and 12mm as per tech spec , ply wood grade bwp of size 8ftx 4ft and 6mm thick as per tech spec , ply wood grade bwp of size 8fx 4ft and 12mm thick as per tech spec , ply wood grade bwp of size 8ftx 4ft x19mm as per tech spec , ppgi sheet of size 10ft x 3ft x 0.63mm thick as per tech spec , ppgi sheet of size 12 ft x 3 ft x 0.63mm thick as per tech spec , steel roofing trough srt of size 1630 mm x 613 mm x 180 mm as per tech spec , steel roofing trough srt of size 1700 x 613 x 180mm as per tech spec , steel roofing trough srt of size 1270 x 613 x 180mm as per tech spec , ismb 150 of rsj 150 x 75mm 3.5 m long as per tech spec , ismb 150 of rsj 150 x 75mm 4.9 mtr long as per tech spec , ismb 150 rsj 150 x 75mm 5.80m as per tech spec , hdpe sand bag of size 75 x 40 cm, sand colour and each bag having weight not less than 60 gms , anti missile screen of size 2.00 x 0.90m as per tech spec , m sand confriming to is 383 - 1997 as per tech spec , aggregate 20mm as per tech spec , aggregate 40mm , pbs roll self finished tarfelt as per tech spec att , pcc hollow blocks 400 mm x 200 mm x 200 mm as per tech spec , load bearing concrete solid blocks of size 400mm x 200 mm x 200 mm as per tech spec , tmt bar 10mm , tmt bar 12 mm dia , tmt bar 16mm , brick sub class b , steel loop hole 610 mm x 330 mm as per tech spec , tiles chequered 400x400mm , bitumen for filling of expansion joints of pcc , fire extinguisher 2 kg as per tech spec , cgi sheet of size 10 ft x 3 ft x 0.63mm thick as per tech spec , cgi sheet of size 12n ft as per tech spec , cgi sheet of size 8 ft x 3 ft x 0.63mm thick as per tech spec , punched tape concertina coil including spike and handle with 50 turns and dia 1050mm as per tech spec //bid details 2 / 87

CTN :45380941

18 Jun, 2026 NA

Dimapur - Nagaland

Tender For bid to ras corrigendum : supply of shelter parts constr mtrls elect furniture and toold items for store shelter - shelter parts constr mtrls elect furniture and toold items for store shelter 2654 d d - socket outlet multipurpose 2 in 1 of 6 and 16 amps flush button type isi marked , modular socket outlet multipurpose 2 in 1 16 amps flush button type isi marked , surface mounting modular boxes suit for switches 12 module of size 8 inch into 6 inch , surface mounting modular boxes suit for switches 8 module of size 8 inch into 3 inch , combined cover plate with frame inner and outer of 12 module , combined cover plate with frame inner and outer of 8 module , cealing rose with square box 65 into 50mm 2 to 3 terminals , pvc flexible nibbed pipe 20mm dia , mcb db 06 way spn 240 volt conf to is 13032 , mcb 10 amp sp 240 volt breaking capacity 10 ka conf to iec 60898 , mcb 20 amp sp 240 volt breaking capacity 10 ka conf to iec 60898 , mcb 32 amp sp 240 volt breaking capacity 10 ka conf to iec 60898 , pvc casing caping 38mm wide not less than 2 mm thick , pvc coupler for 38mm casing and caping pipe , pvc tee for 38mm casing caping pipe , pvc sockets for 38mm casing caping pipe , pvc corner bend for 38mm casing and caping pipe , pvc elbow for 38mm casing caping pipe , pvc junction linker 75 into 75mm , house service bracket hook type complete with 3 mtr long gi pipe 40mm dia and ms hooks clamps ans stay , pvc conduct pipe 20mm dia isi marked , pvc coupler for 20mm dia coduict pipe , pvc elbow for 20mm dia conduict pipe , pvc space bar saddles for 20mm dia pvc pipe , insulation tape 19mm width 25mm long , no 8 into 19 csk screw full threaded , no 8 into 32 csk screw full threaded , no 8 into 50 csk screw full threaded , no 8 into 75 bolt and nuts full threaded , store rack as per specification given in appx c of ts , chair writing as per specification given in appx d of ts , writing table as per specification given in appx d of ts , almitrah steel large as per specification given in appx d of ts , hand held trolley as per specification given in appx d of ts , hand held fire extinguisher as per specification given in appx d of ts , smoke alarm as per specification given in appx d of ts , heat alarm as per specification given in appx d of ts , habd held grinder cutter 125 l professional rated input power 1800 w 11500 rpm 125mm disc dia make as per appx ii of ts , bosch grinder cutter blade 125mm dia make as per appx ii of ts , portable welding machine arc 220a built in hot start anti stick and adjustable arc force heavt duty make as per appx ii of ts , plaster 6 inches material wooden heavy duty wooden hand float trowel 10 inch into 6 inch polished wood plastering , plaster 8 inches material wooden heavy duty wooden hand float trowel 10 inch into 6 inch polished wood plastering , hand gloves masonery work flocked liner neoprene over latex coating safety gloves , spirit level 3 feet , spanner set no of spanner 8 size 6mm to 22mm generally conf to is 2028 to 2008 make as per appx ii of ts , plumbob with kanda and 2 mtr thread make as per appx ii of ts , iron tasala 10 kg capacity , iron bucket 15 ltr capacity , nylon rope , sintex 500 ltr thrree layer pvc water tank 500 ltr capacity make as per appx ii of ts , brick hammer weight 5 kg make as per appx ii of ts , ball pane hammer weight 1 point 35 kg make as per appx ii of ts , ms electrical tool kit make as per appx ii of ts , welding rod 60 pcs size 4mm into 450mm in one pkt , double wheel concrete trolley fabricated heavy duty ms sheet and ms frame with 80 to 100 ltr cap constr mtrls with loading cap upto 300 kg make as per appx ii of ts , drilling machine adopter make as per appx ii of ts , screw driver set make as per appx ii of ts , cutting plier make as per appx ii of ts , wire cutter make as per appx ii of ts , tester make as per appx ii of ts , revit //bid details 2 / 58 machine make as per appx ii of ts , revit 500 nos in one pkt , concrete mixer machine 230 ltr with 1 hp pure copp

CTN :45532300

29 Jun, 2026 15.00 Lacs

Madurai - Tamil Nadu

Tender For schedule - a 1 (boq 1) water supply pipeline material supply - g.i. pipes "b" class 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. elbow 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. bend 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. coupling 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i.union 20mm, 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i.tee 20mm.g.i, 25mm.g.i, 32mm.g.i, 40mm.g.i, 50mm.g.i, 65mm.g.i, 80mm.g.i, 100mm.g.i, g.i. pipe nipple 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. hex nipple 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. plug 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. reducer 20mm x 15mm, 25mm x 20mm, 32mm x 25mm, 40mm x 32mm, 50mm x 40mm, 65mm x 50mm, 80mm x 65mm, 100mm x 80mm, gate valve isi 3/4", 1", 11/4", 11/2", 2", 21/2", 3", 4", gate valve non -isi 3/4", 1", 11/4", 11/2", 2", 21/2", 3", 4", 50mm cid/f sluice valve, 80mm cid/f sluice valve, 100mm cid/f sluice valve, 50mm ms coupler, 65mm ms coupler, 100mm ms coupler, 20mm single air valve, 20mm double air valve, 40mm double air valve, 15mm ferrule, 20mm ferrule, solvent cement, hot treat oil, yarn, lend wool, cement, g.i. tape 20mm, 20mm waste not tap, 20mm brass bib cock, 40mm brass bib cock, 1" gi length coupling, 11/4" gi length coupling, 11/2" gi length coupling, 2" gi length coupling, 21/2" gi length coupling, 3" gi length coupling, 4" gi length coupling, 1" non return valve, 11/4" non return valve, 11/2" non return valve, 2" non return valve, 21/2" non return valve, 3" non return valve, 4" non return valve, pvc pipes of 6kg/cm2 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc pipes of 4kg/cm2 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc coupler 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc bend 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc end cap 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc mta 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc fta 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc tee 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc saddle fees suitablefor 20mm, 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, super thick pvc pipes 20mm, 25mm, 32mm, 40mm, 50mm, pvc reducers 160x140mm, 140x 90mm, 110x75mm, 75x63mm, 63x50mm, 450mm a.c. pipe, 300mm a.c. pipe, 250 mm a.c. pipe, 150 mm a.c. pipe, 450mm c.i.t. joint, 300mm c.i.t. joint, 250mm c.i.t. joint, 150mm c.i.t. joint, 5" g.i.pipe, 6" g.i.pipe, 7" g.i.pipe, 8" g.i.pipe, 9" g.i.pipe, 10" g.i.pipe, 5" pvc pipe, 6" pvc pipe, 7" pvc pipe, 8" pvc pipe, 9" pvc pipe, 10" pvc pipe, 5x5/8 bolt nut with washer, 3x5/8 bolt nut with washer, 31/2x3/4 bolt nut with washer, 1" steal hex nipple, 11/4" steal hex nipple, 11/2" steal hex nipple, 2" steal hex nipple, 21/2" steal hex nipple, 3" steal hex nipple, 4" steal hex nipple, 11/4"x1" steal reduce hex nipple, 2"x11/2" steal reduce hex nipple, 21/2"x2" steal reduce hex nipple, 3"x21/2" steal reduce hex nipple, 31/2"x3" steal reduce hex nipple, 11/2"x1" steal reduce bush, 2"x11/2" steal reduce bush, 21/2"x2" steal reduce bush, 3"x21/2" steal reduce bush, 31/2"x3" steal reduce bush, 1" long size bore clamp, 11/2" long size bore clamp, 11/4" long size bore clamp, 2" long size bore clamp, 21/2" long size bore clamp, 3" long size bore clamp, 4" long size bore clamp, 8" bore cover, 1"x2 feet pipe nipple, 11/4"x2 feet pipe nipple, 11/2"x2 feet pipe nipple, 2"x2 feet pipe nipple, 21/2"x2 feet pipe nipple, pvc water tank litre, cellak 100 ml pottle

CTN :45482035

18 Jun, 2026 19.50 Lacs

Rohtak - Haryana

Tender For corrigendum : supply of various parts of horizontal pumps and tools... - ms flat 50*5 mm, ms angle 50*50*5mm, 50*50*6mm (tata,sail,jindal make), ms channel ismc 100 (tata,sail,jindal make), ss round bar 30 mm(line shaft), ss round bar 40 mm(line shaft), plastic rope 3/4", nut & bolt 5/8"x 3", m.s nut & bolt 5/8" x 21/2", ms nut bolt 5/16x 1.5", ms nut bolt 1/2" x 2", ms nut bolt 1/2" x 11/2", ms nut & bolt 1/2" x 21/2", ms nut & bolt 1/2" x 3", ss nut bolt 3/4x3, stud with nut 11/16 x 5/8 x 3", stud with nut 5/8x 5/8 x 3", gi wire 8 swg, gland packing 3/8", gland packing 1/2", lift belt 5ton cap x 4 mtr, lift belt 3ton cap x 3 mtr, lift belt 3ton cap x 2 mtr, gland plate for n.w-12d, gm gland plate for 5 c/s v.t pump as per sample, g.m gland plate for 10 c/s v.t pump as per sample, pipe wrench 12"(300mm size) (taparia/pye/miranda/spartan/stanley make ), hammer 1lbs, screw driver 10" 250mm (taparia/pye/miranda/spartan/stanley make ), screw driver 12" (taparia/pye/miranda/spartan/stanley make ), screw driver 8" (taparia/pye/miranda/spartan/stanley make ), ring spanner 24x26mm (taparia/pye/miranda/spartan/stanley make ), insulated plier 8" (200mm) (taparia/pye/miranda/spartan/stanley make ), long nose plier 8" (taparia/pye/miranda/spartan/stanley make ), d-e spanner 21x23 (taparia/pye/miranda/spartan/stanley make ), d-e spanner 24x26mm (taparia/pye/miranda/spartan/stanley make ), d-e spanner 14x15mm (taparia/pye/miranda/spartan/stanley make ), d-e spanner 12x13mm (taparia/pye/miranda/spartan/stanley make ), ring spanner 14x15 (taparia/pye/miranda/spartan/stanley make ), ring spanner 21x23 (taparia/pye/miranda/spartan/stanley make ), ring spanner-12x13 (taparia/pye/miranda/spartan/stanley make ), line tester (7"- 8") (taparia/pye/miranda/spartan/stanley make ), freemans 5mx19mm measuring tape with belt clip and lock, hexa blade one side/double side mix, welding holder heavy duty, hdpe tirplaine 15 x12 heavy duty, coupling tyre tc 13, delivery casing for nw-12d inner for kirlosker pump, delivery casing for nw-12d outer for kirlosker pump, impeller 6x6 nw-12d kirloskar pump, bearing pedestal for nw-12d kirlosker make, shaft for nw-12 d pump kirlosker make, lantern ring for nw-12 d pump kirlosker make, water deflector for nw-12 d pump kirlosker make, abrasive cutting wheel 14 (grindwell norton, 3m, bosch make), motor shaft with check nut 5 c/s v.t pump as per sample, impeller nut mf for 5 cs horizontal pump as per sample, fuel pump gear tv-2 kirlosker make, servo super oil mg 20w-40, log book of vehicle (25 page) as per sample, mas register (50 page) as per sample, log book of machinery (25 page) as per sample, cyl liner with joint ring 1800801 kirlosker make, valve kit tv-2 kirlosker make, liner piston chota jawan kirlosker make, head gasket 87.5 mm 1180090300 kirlosker make, air cleaner kirlosker make, packing kit tv-2 kirlosker make, pipe t type kirlosker make, fuel tank complete kirlosker make, fuel filter assy kirlosker make, nozzale chota jawan kirlosker make, air cleaner chota jawan kirlosker make, packing kit chota jawan kirlosker make, valve kit chota jawan kirlosker make, head gasket chota jawan kirlosker make, diesel filter chota jawan kirlosker make, banjo bolt tv2 kirlosker make, nozzle 9430034216 kirlosker make, piston assy.180061000-1800615000 kirlosker make, cr bolt tv2 kirlosker make

CTN :45525406

22 Jun, 2026 NA

Pondicherry - Pondicherry

Tender For main work : construction of canteen building for the puducherry technological university inside the ptu campus under rusa fund. sub work : providing and fixing of kitchen chimney, gas pipeline connection and kitchen equipment for the canteen building inside the ptu campus under rusa fund (iii call) - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

CTN :45523446

16 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For schedule - a 1 (boq 1) water supply pipeline material supply - g.i. pipes "b" class 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. elbow 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. bend 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. coupling 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i.union 20mm, 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i.tee 20mm.g.i, 25mm.g.i, 32mm.g.i, 40mm.g.i, 50mm.g.i, 65mm.g.i, 80mm.g.i, 100mm.g.i, g.i. pipe nipple 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. hex nipple 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. plug 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, g.i. reducer 20mm x 15mm, 25mm x 20mm, 32mm x 25mm, 40mm x 32mm, 50mm x 40mm, 65mm x 50mm, 80mm x 65mm, 100mm x 80mm, gate valve isi 3/4", 1", 11/4", 11/2", 2", 21/2", 3", 4", gate valve non -isi 3/4", 1", 11/4", 11/2", 2", 21/2", 3", 4", 50mm cid/f sluice valve, 80mm cid/f sluice valve, 100mm cid/f sluice valve, 50mm ms coupler, 65mm ms coupler, 100mm ms coupler, 20mm single air valve, 20mm double air valve, 40mm double air valve, 15mm ferrule, 20mm ferrule, solvent cement, hot treat oil, yarn, lend wool, cement, g.i. tape 20mm, 20mm waste not tap, 20mm brass bib cock, 40mm brass bib cock, 1" gi length coupling, 11/4" gi length coupling, 11/2" gi length coupling, 2" gi length coupling, 21/2" gi length coupling, 3" gi length coupling, 4" gi length coupling, 1" non return valve, 11/4" non return valve, 11/2" non return valve, 2" non return valve, 21/2" non return valve, 3" non return valve, 4" non return valve, pvc pipes of 6kg/cm2 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc pipes of 4kg/cm2 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc coupler 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc bend 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc end cap 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc mta 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc fta 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc tee 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, pvc saddle fees suitablefor 20mm, 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 140mm, 160mm, super thick pvc pipes 20mm, 25mm, 32mm, 40mm, 50mm, pvc reducers 160x140mm, 140x 90mm, 110x75mm, 75x63mm, 63x50mm, 450mm a.c. pipe, 300mm a.c. pipe, 250 mm a.c. pipe, 150 mm a.c. pipe, 450mm c.i.t. joint, 300mm c.i.t. joint, 250mm c.i.t. joint, 150mm c.i.t. joint, 5" g.i.pipe, 6" g.i.pipe, 7" g.i.pipe, 8" g.i.pipe, 9" g.i.pipe, 10" g.i.pipe, 5" pvc pipe, 6" pvc pipe, 7" pvc pipe, 8" pvc pipe, 9" pvc pipe, 10" pvc pipe, 5x5/8 bolt nut with washer, 3x5/8 bolt nut with washer, 31/2x3/4 bolt nut with washer, 1" steal hex nipple, 11/4" steal hex nipple, 11/2" steal hex nipple, 2" steal hex nipple, 21/2" steal hex nipple, 3" steal hex nipple, 4" steal hex nipple, 11/4"x1" steal reduce hex nipple, 2"x11/2" steal reduce hex nipple, 21/2"x2" steal reduce hex nipple, 3"x21/2" steal reduce hex nipple, 31/2"x3" steal reduce hex nipple, 11/2"x1" steal reduce bush, 2"x11/2" steal reduce bush, 21/2"x2" steal reduce bush, 3"x21/2" steal reduce bush, 31/2"x3" steal reduce bush, 1" long size bore clamp, 11/2" long size bore clamp, 11/4" long size bore clamp, 2" long size bore clamp, 21/2" long size bore clamp, 3" long size bore clamp, 4" long size bore clamp, 8" bore cover, 1"x2 feet pipe nipple, 11/4"x2 feet pipe nipple, 11/2"x2 feet pipe nipple, 2"x2 feet pipe nipple, 21/2"x2 feet pipe nipple, pvc water tank litre, cellak 100 ml pottle

CTN :45524000

18 Jun, 2026 9.61 Lacs

Mumbai - Maharashtra

Tender For repairs and renovation of doors and m.s. grill, r.c.c. water tank, waterproofing, plastering at 28 p.s.i. qrts. sussex road at byculla, mumbai

CTN :45415159

17 Jun, 2026 4.58 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : repair and maintenance of tube wells and boosters including repair of water level gauge, ms panel, sluice valves and allied items of civil / electrical at various buildings i.e. punjab raj bhawan, haryana raj bhawan & residence sector-7, under maintennace booth, sector-7, chandigarh. (ch to: 2216 (np) mtc. and repair ) - repair of ci sluice valve up to 150 mm dia including dismantling, repair / replacement of spindle, nut , rubber packing, nuts and bolts complete., up to 100 mm dia, lifting and lowering of submersible pump set including dismantling of flenged joints, taking out column pipes, re-jointing etc including replacement of defective packing, nuts and bolts etc complete, tube well, booster, supplying and fixing of single phase preventor make minilec or equivalent model of approved make to the satisfaction of eic , supplying and fixing of current transformer ( ct ) for ampere meter of suitable rating complete., supplying and fixing of overload relay of following capacities, 14 to 23 amp, 30 to 42 amp, 45 to 75 amp, providing and fixing of star delta starter timer of make l&t or equivalent model of approved make to the satisfaction of eic, providing and fixing of kit kat 500 amp complete in all respect, supplying and fixing of capacitor of 20 to 50 mfd make l&t, siemens or equivalent model of approved make to the satisfaction of eic , supplying and fixing of analog meter of make l&t ( rishabh ) or equivalent model of approved make to the satisfaction of eic , volt meter, ampere meter, supplying and fixing of 3 pole mccb of following capacity of make l&t, bch, havells or equivalent model of approved make to the satisfaction of eic , 100 amp, supplying & fixing of contactors block of make l&t, bch or equivalent model of approved make to the satisfaction of eic , mnx - 25, mnx - 32, mnx - 50, mnx - 70, supplying and lowering of submersible cable 16mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , supplying and lowering of submersible cable 25mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , providing and fixing hydro pneumatic pump of size 0.5 hp of approved make with 24 ltr capacity tank, pressure switch, pressure gauge, nrv accessories and making connections complete of make crompton or equivalent model of approved make to the satisfaction of eic, repair and rewinding of submersible pump set including carriage from installation to workshop and back. the rate include replacement of all defective parts of pump and motor rewinding., 5 hp, 7.5 to 10 hp, 35 hp to 55 hp, repair and rewinding of monoblock submersible pumping set including repacement of defective parts as required and carriage from installation to workshop and back., 0.5 h.p, 1 h.p, 2 h.p, manufacturing, supplying and fixing of ms control panel 16 gauge of size 600x700mm with door including wiring of inside panel, complete in all respect, providing and fixing of self pumping monoblock single phase pump for boosting of make crompton or equivalent model of approved make to the satisfaction of eic, 0.5 h.p, 1 h.p, 2 h.p, providing and fixing of pressure gauge make h-guru or equivalent model of approved make to the satisfaction of eic, providing and fixing of elcb 63 amp make l&t/havells or equivalent model of approved make to the satisfaction of eic, repair of internal control wiring 1.5mm wire with thimbles, nut bolt etc. complete

Precipitation Tank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government