Latest precision machine Tenders | Government precision machine Tenders

Co-operative

CTN :45715046

06 Jul, 2026 NA

Kawardha - Chhattisgarh

Tender For supply of re-non authorized suppliers - "bearing hose pipe with connector ,din-20022-en853-isn-1/4""-06mm- w.p.-225 bar/3270psi-4q2012 make - polylex" , cane unloader bridge wheel as per drg. bssuk/mh/821/16 (modified) moc - forged steel confirming to is : 2707 gr. ii duty spin hardness 300 bhn or steel cast en-9 , cane unloader trolley wheel as per sample (modified) moc - forged steel confirming to is : 2707 gr. ii duty spin hardness 300 bhn or steel cast en-9 , cane unloader bridge wheel gear as per drg. no. bssuk/mh/832/16 moc - forged steel confirming to is : 2707 gr. ii duty spin hardness 300 bhn or steel cast en-9 , "pinion unloader no. 1 & 2 bssuk drg. no. u-1 moc - en-19/en-9 materials precision machined and teeth cutting by hobbing machine duly hardend to with stand the heavy load. " , "pinion unloader no. 1 & 2 bssuk drg. no. u-2 moc - en-19/en-9 materials precision machined and teeth cutting by hobbing machine duly hardend to with stand the heavy load. " , "big gear unloader no. 1 &2 bssuk drg. no. u-03 moc - en-19/en-9 materials precision machined and teeth cutting by hobbing machine duly hardend to with stand the heavy load. " , "pinion unloader no. 3 bssuk drg. no. u-4 moc - en-19/en-9 materials precision machined and teeth cutting by hobbing machine duly hardend to with stand the heavy load. " , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-6 mm make-champion/spitman , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-8 mm make-champion/spitman , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-10 mm make-champion/spitman , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-12 mm make-champion/spitman , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-20 mm make-champion/spitman , self lubricatingasbestos plaited non metalic gland packinggraphited style-1800 size-30 mm make-champion/spitman , "s.s wire reinforced asbestos packing for high temp. metallic graphited gland packing style -1916 size 03mm make - champion/spitman" , "s.s wire reinforced asbestos packing for high temp. metallic graphited gland packing style -1916 size 06 mm make - champion/spitman" , "s.s wire reinforced asbestos packing for high temp. metallic graphited gland packing style -1916 size 08mm make - champion/spitman" , "s.s wire reinforced asbestos packing for high temp. metallic graphited gland packing style -1916 size 10mm make - champion/spitman" , "s.s wire reinforced asbestos packing for high temp. metallic graphited gland packing style -1916 size 12mm make - champion/spitman" , "low pressure joint sheet size - 1.5mm style - 20 make -champion/spitman" , "low pressure joint sheet size - 3mm style - 20 make - champion/spitman" , "low pressure joint sheet size - 5 mm style - 20 make - champion/spitman" , "h.p. metallic steam joint 1.5mm style - 54 super make - champion/spitman" , "h.p. metallic steam joint 3 mm style - 54 super make - champion/spitman/ ferrolite" , "h.p. metallic steam joint 5 mm style - 54 super make - champion/spitman/ ferrolite" , rubber joint sheet size-2mtr x 2 mtr. , "wire rope cuppi 2 wear(way) make - heavy duty" , "wire rope cuppi 1 wear(way) make - heavy duty" , "gauge glass a-9 (with mica & gaskit set) make - klinger" , spiral joint 308x 275x 5mm moc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint 342x310x5mm, moc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint 255x395x3mm, moc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint 154x245x3mm, mmoc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint 248x218x5mm,moc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint sheet size 220x242x3 moc-s.s 316/nicle alloys(inconel 625) make - iso/isi marked , spiral joint sheet size 310x340x5moc-s.s 316/nicle alloys(inconel 625) make - i

CTN :45716578

08 Jul, 2026 NA

Gajraula - Uttar Pradesh

Tender For providing of customized amc/cmc for pre-owned products - repair of weighbridge spares and amc; as per enclosed; annual maintenance contract (amc); monthly; yes

CTN :45676692

09 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of fire safety and fighting laboratory equipment for fts department - purchase of fire safety and fighting laboratory equipment for fts department, cleveland open cup (coc) apparatus standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 c per minute (as per standard) temperature range: (-6 to 400) c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valve body: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hzsafety: overheat protection heat insulation, pensky-martens closed cup apparatus standard compliance: astm d93 / is 1448 (part 21) type: pensky-martens closed cup (motorized, digital type preferred) test cup: brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system: heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustableignition:pilot flame with automatic shutter mechanismtemperature measurement:thermometer or digital sensor (ip-28c or astm)digital temperature displaypower supply:230v ac, 50 hzsafety: over-temperature cut-off flame safety control

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Central Government / Public Sector

CTN :45513776

25 Jun, 2026 NA

Agartala - Tripura

Tender For corrigendum : providing of customized amc/cmc for pre-owned products - supply of spares and annual maintenance contract for electronic weighbridge installed at agartala bp; --; annual maintenance contract (amc); quarterly; yes,customized amc/cmc for pre-owned products - supply of spares and annual maintenance contract for electronic weighbridge installed at agartala bp; --; annual maintenance contract (amc); quarterly; yes,customized amc/cmc for pre-owned products - supply of spares and annual maintenance contract for electronic weighbridge installed at agartala bp; --; comprehensive maintenance contract (cmc); not applicable; yes,customized amc/cmc for pre-owned products - supply of spares and annual maintenance contract for electronic weighbridge installed at agartala bp; --; comprehensive maintenance contract (cmc); not applicable; yes

CTN :45635022

30 Jun, 2026 NA

Shahjahanpur - Uttar Pradesh

Tender For providing of repair and overhauling service - spares part / fabrication work of weighbridge; isi marked; yes; service provider premises

Central Government/Public Sector

CTN :45606494

09 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For purchase of ultra precision machine for fabrication of metal tube

CTN :45602582

02 Jul, 2026 NA

Sagar - Madhya Pradesh

Tender For supply of supply of spares and upgradation of sulfur weighbridge , installation and commissioning charges

Central Government And Public Sector

CTN :45454524

06 Jul, 2026 NA

Bilaspur - Chhattisgarh

Tender For corrigendum : supply, installation, testing, commissioning of electronic in-motion weighbridge on turnkey basis over bilaspur division. technical specifications as per rdso guidelines wd-29-misc-19 (rev-1), oct-2021 with all latest amendments and technical requirements as per annexure-a. make: rdso approved vendors only. ]consignee sse/bcn/bsp, secrchhattisgarh 7.00 numbersinspection details stage inspection not required2 65610062a amc (y)non stock--- yesconsigneeinr description :post-warranty comprehensive annual maintenance contract (camc) for 10 years, covering all spares, consumables, labour, preventive/breakdown maintenance, and complete foundation work. supply of all essential maintenance spares shall strictly conform to clause 6.1 of the rdso guideline specification,and the entire scope of execution shall be as per paragraph 33 of the technical specifications. [ warranty period: 2 years, amc period: 10 years, rate of discounting: 10 % ] ]