Latest prefabricated canopy Tenders | Government prefabricated canopy Tenders

Central Government/Public Sector

CTN :45302387

28 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - abandoned old buildings/sheds/structures of mg workshop- 04 units, unit no. 19 - small shed near dome, unit no. 22 - record room, unit no. 23 - dwm office, unit no. 24 - machine and generator room location - mg workshop bvp. this lot of abandoned condemned buildings consisting of released door with chokhat wooden u/s - 3 nos, released window with chokhat wooden u/s - 41 nos, released wood - 1.296 cum, released ac sheet approx. - 433 sqm, released steel door u/s - 60 kg, released manglore tiles approx. - 620 sqm, released rails from structures u/s [41.25.50r & other miscellaneous type of rail off sizes] - 896 kg, ms scrap. i.e tie bar, flat, angle, fish plate, nut, bolt, ms sheet door, steel bar, gi sheet, xpm jalli etc. off size approx - 6726.7 kg, released masonary /rubble approx - 290.9 cum. custodian - sse (w) bvp, mode of delivery by lot, loading by purchaser. note: 1. dismantling is permitted up to ground level only. digging below ground level is not permitted. due care is to be taken by the bidder/purchaser to avoid unwanted mishapes at work spots. they should ensure to keep a safety banner around the work spot till it is completed since the locations are surrounded with working offices. 2. after removing/ clearing the rcc/ brick machonary rubbish from the spot only, the delivery of wood/ iron material will be affected. 3. contractor should take care of any cable while dismantling and digging. damage to railways shall be recovered as per extent rules. 4. part delivery/ part handing over is not allowed. 5. any ng/mg/bg pway rail lines or pway scrap with or without attachments lying under or beneath the building/sheds/structures or surrounding area are not deliverable. 6. any non-ferrous material of high value if found from the lot, it needs to be submitted by the purchaser to the custodian. 7. power of attorney along with aadhar card/identity proof/address proof must be submitted to this office for verification of authorised person by bidder before handing over (if any.) fdp 50 days.

Central Government/Public Sector

CTN :45235162

26 May, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of depot ferrous scrap - scrap condemn ferrous mixed melting consisting of and released from, switch blcp, zpt, bldj, blho, ztel, zban, zfwa, zlfr, zlda, zlc, zli, zprd, blpr, hog coupler, fl dom, marker light, dial gauge,diffrent type of measuring tools, electrical and machanical tools, bench type, accesories of dga, analytical balance, yoke, amonia printing machine, table, pinion, lifting tackle assly, magger, steel channel, lipid racer, plain racer, axle box crown and rear cover, lock plate, abutment ring, housing for traction bar, battery stand, set of lybrinth, end frame, holder plate, bello plate, nut, washer, speed prove housing cover, gear, set of hardware, racer, set of safety sealing, bench vice, set of bolt, longi set, brake shoe key, fly catcher fittings, lt distribution panel board, starter, mdb box, tube light assly, lt panel, diffrent typr of stand, box, top, etc, solar geasure sheet, exhaust frame, sign board frame, dg filter silencer, a9, sa9, c2 relay valve, c2w valve, air drayer valve, nut bolt, pbu/tbu unit, pentopen strip, main spring, longitude tube, upper articulation assly, push rode, study link, study tube, arm assly, pento base frame, servomotor, hardware and compresure crankshaft, free end cover, ply and cover cylinder, intercooler, head, base frame, coupling filter, disk valve, ms pipe, crake end shield, bearing, release ferrous items during overhauling, loco filter jali, drums, iron sheet, rdpt kits, small box racks and structure, packing cage cab fan coverage jali, dust cover, oil filtration plant release item, oil machine release item, heater coil heater element, test bench, pit wheel lathe machine release items, fuse oil seal, filter contactors switch, lamp pipe, roller filter, disc, gaskets, main drive roller shaft, light junk box cover, loco coridor cover, water protection cover, ms angle, wire rope, slings bracket fan and air circulation fan jali and blades, spm, iron spring, ms washer, screw, liner, car body filters, ms thin sheets, ms spring, cutter pin channel, shutter, hose pipe wires, ms angle, structures, blower fan jali, filters, window shutter, flasher light, dome cooler body without motor & pump, diffrent type of resistance, grid panto strip, diffrent type of ferrous release from charger, regulator, cvt, repeater frame, steel rack, ups, transformer, sensor gear, bearing cover, locking plate, special rig, distance piece bearing, middle wheel lock plate, thrower, lock plate, loose rip, racer distance piece, spring seat liner, push pull rod, spheriblock, damper, cattle guard, cbc coupler body, yoke, buffer, screw coupling, draft gear, nuckle, clevis, yoke pin, nuckle pin, clevis pin, hand brake, bello plate, brake shoe key, cbc spare parts, operating handle, ferrous released from master controller, c145 contactor, em-contactor, c118 contactor, program switch, etc.

Central Government/Public Sector

CTN :45174697

20 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - p.l. no. 98230025. aluminium scrap consisting of condemned and unserviceable bkbl fans,bmbc dome covers, fip / sump door / tappet covers, panel boards, armature fans, impellers , blowers, fuel oil level gauges , heat sinks , bmbc dome covers, emd strainer, wiper assembly,emd stainer, temperature sensor controller, a9 / sa9 valves, steel cap pistons, pistons , cylinders, pressure guage parts ,head light frame ,portable grinding machine parts, route indicator , heating compressor gear box, side indicator , wiper motor ,horn bell,governor base, turbo impellar,magnetic valve, master contorller coupler , buzzer cover ,steel capped piston, flasher light unit , double side door closer, old hydraulic door closer , choke box , earthing device housing with cover, m.u i.v coupler housing , marker light old light housing , parts of silient gnerators set , motor / auxillary generator covers and similar diesel loco / carriage items aluminium in nature with / without ferrous / rubber /steel/ very meagre quantity of brass/copper attachments. as is where is condition. segregation and removal of attachments not permitted. note:- cssd/goc electronic weigh bridge to be used for weighment.

Central Government / Public Sector

CTN :45160217

19 May, 2026 NA

Multi City - Telangana

Tender For auction sale of depot miscellaneous scrap - 12808med25k, 98414513, quantity: 1865 kgs. scrap condemned unserviceable medical operation theatre and x- ray room items consisting of x ray machine, dental chair unit, central front loading autoclave, dental x -ray machine, multiple operation table, operation theatre light ceiling mounted single dome, suction machine ss cabinet, suction machine high vacuum, cardiac defibrillator, multipara monitor, oxygen generator, anaesthesia delivery system, portable ophthalmic ultrasound scan system, video endoscope, automatic external defibrillator, ophthalmic operating microscope and other hospital items with or without attachment. note: delivery by weighment basis only. location: bin no- 808, left side of temple road. hsn code: 90221900, gst: 18 percent. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery as per mv act 1988.

CTN :45086281

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no.p.nfa-1.bin no- 10/a, 8/a & ground floor.exmp.04.2026-27.01 description- scrap aluminium with iron attachment, and other aluminium casting, field coil, lamp caps, aluminium boring etc. our offer: a) scrap aluminium with or without iron attachment. such as-aluminium air after cooler which are kept in front of weighing machine, scrap bmbc dome cover, fuel injection pump cover etc. bin no-10/a & ground floor qty= 1880 kgs. b) scrap aluminium rear cover and front cover with or without rubber and grease attachment. in bin no-8/a . qty-1993 kgs. loading will be done by purchaser's own arrangment.

Central Government/Public Sector

CTN :45054866

11 May, 2026 NA

Bhusawal - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap condemned (ms low melting rusted ferrous) consisting of ms cutting pieces, cut pieces pipes of material air filter fire extinguisher various type sort and sizes & pneumatic pipe lines, cock valves, ms sheet, msr broken parts, pantograph parts, flasher light box with or without non-ferrous attachment, condemned cup board (almirah), material rack, loco driver's seat, with minor ss attachments, ms chairs, tables, boards, gear case , screw coupling, brake liner, msu parts, nut bolts, washer, ms patti, cp parts, rim, ms jail, ms bearing cover, rods, stopper, ms angle, cock, ms bearing, siling wire rope, mvmt, ocb dome, blower, locker, air tank, air reservoir, frame stand, small spring, various types and broken ms parts and miscellaneous items with or without loco and non-loco items with minor ss & aluminium or rubber attachments if any, in sort and sizes released from different sections as well as from electric locomotives. note: - if any non-ferrous material is found in the lot will be retain by the custodian. cutting permission is allowed for easy loading.

Central Government/Public Sector

CTN :45008556

04 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of others - scrap fe & n/fe (1)compresor off size, 110no, fe-935kg, cu-66kg(2)nrv 6"/4", 2no, fe-6kg (3)timer, 24no, fe-0.48kg (4)capacitor 2.5 mfd to 120 mfd, 668no, pvc-13.36kg (5)current transformer,9no, fe-36kg, cu-9kg (6)condensor coil, 15no, fe-3.75kg, cu-3.75kg, al-1.50kg (7)expansion valve, 14no, cu-1.40kg (8)fan blade, 79no, fe-31.60kg, al-3.95kg (9)db box/dp switch, 17no, fe-1.70kg (10)mccb/icptn/off size, 59no, fe-11.80kg, cu-.295kg (11)power pack, 1no, fe-.10kg (12)5 in 1 socket 5 amp, 38no, cu-0.19kg (13)sealed dome compresor, 84no, fe-252kg, cu-33.60kg (14)fan motor of indoor unit, 49no, fe-12.25kg, al-4.90kg (15)condensor fan motor, 139no, fe-69.50kg, cu-27.80kg (16)geyser element, 9no, cu-0.45kg (17)over load relay, 67no, fe-0.67kg, cu-0.335kg (18)volt meter, 16no, fe-0.08kg, cu- .032kg, al- .08kg (19)water cooled condensor, 3no, fe-9kg, cu- .30kg, al- .30kg (20)front grill, 3no, pvc- .60kg (21)fitting off size, 1941no, fe-970.50kg (22)wall fan off size, 123no, fe-270.60kg, cu-18.45kg (23)glow sign board, 30no, fe-90kg (24)tik w board off size, 63no, wood-15.75kg (25)acb off size, 9no, fe-193.50kg, cu-9kg (26)ms angle/gi structure, 1no, fe-468kg (27)v bracket, 20no, fe-80kg (28)insulator scrap broken, 1363no, nil (29)energy meter, 1724no, fe-43.10kg, cu-17.24kg (30)scrap wood ,1no, wood- 587kg (31)pvc alumn. wire, 80.7 m, al-40.350kg, (32)pedestal fan ,99no, fe-99kg, cu-9.90kg, al-4.95kg (33) geyser off size, 56no, fe-448kg, cu-5.6kg, al-11.2kg (34)stabilizer, 10no, fe-120kg, cu-25kg (35) insect killer, 21no, fe-73.50kg, cu-1.05kg (36)cls panel 63 amp.,17no, fe-595kg, cu-49.81kg (37) main switch /mcb/mccb, 688no, fe-66.80kg , cu-13.36kg (38)heater (plastic),1no, fe-0.20kg (39) exhaust fan off size, 294no, fe-588kg, cu-44.10kg, al-14.7kg (40)lv/hv side bushing, 5no, cu-0.50kg (41)tap changer switch ,4no, fe-0.40kg, cu-0.1kg (42) power capaciter ,2no, fe-1kg (43)street light controller ,5no, fe-10kg (44) led lamp scrap,629no, al-3.145kg (45)released horizontal siren ,2no, fe-74kg, cu-6kg (46) air circulator fan ,41no, fe-205kg, cu-6kg (47) scrap tyer , 18no (48) led tube released , 2187no, al-2.187kg (49) ups, 2nos, fe-6kg, cu-0.2kg, al-0.02kg (50) ocb ,2no, fe-150kg, cu-15kg, al-2.5kg (51) thermostate ,48no, fe-4.80kg (52) capacitor off size , 193no, cu-0.965kg (53) blower drum ,40no, fe-8kg (54) pvc cut size copper wire, 470m., cu-0.5kg (55) pvc insulated copper wire , 145kg, cu-95kg (56) combination piler ,3no, fe-0.75kg (57) clamp meter ,1no, cu-0.005kg (58) fan regulator , 6no, cu- .012kg (59) cappilery (copper tube) ,6no, cu-0.06kg , (60) empty drum ,27no, fe-486kg (61) 1 core alumn. cable, 840m, al-40kg (62)lighting arrester,1no, fe-1kg (63) vaccume interueptor, 3no, fe-0.30kg (64)outdoor type isolater ,1no, fe-40kg (65) compressor off size ,69no, fe-172.5kg, cu--17.25kg (66) pcb kit , 10no (67)single phase preventor ,63no, fe-3.15kg, cu-1.26kg (68) (a)outdoor fitting off size,1670 no, fe-501kg, al-1002kg, (b)fitting outdoor,280 no, fe-700kg, cu-14kg, al-42kg (69)switch socket ,21no, cu-0.105kg (70)controller switch, 1no, fe-0.05kg (71) electronic chok, 23no, fe-1.15kg, al-0.115kg (1-71) lot no-5 (1-71)location-sse/ph/store/ddu

Central Government/Public Sector

CTN :44977685

29 Apr, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - abandoned old buildings/sheds/structures of mg workshop- 04 units ,unit no. 19 - small shed near dome , unit no. 22 - record room, unit no. 23 - dwm office, unit no. 24 - machine and generator room location - mg workshop bvp. in lot abandoned condemned buildings consisting of released ac sheet approx. - 433 sqm, released steel door u/s - 60 kg, released manglore tiles approx. - 620 sqm, released rails from structures u/s [41.25.50r & other miscellaneous type of rail off sizes] - 896 kg, ms scrap. i.e tie bar, flat, angle, fish plate, nut, bolt, ms sheet door, steel bar , gi sheet, xpm jalli etc. off size approx - 6726.7 kg, released masonary /rubble approx - 290.9 cum. custodian is sse (w) bvp, mode of delivery by weight, deliverable lot qty - 7.683 mt, loading by purchaser. note: 1. delivery of only ferrous material as mentioned qty. in lot will be given. purchaser is not allowed to take leftover ferrous material. 2. all wooden material including released door with chowkhat, released window with chowkhat, zaffry or any other wooden items are reclaimable and needed to submit to the custodian at reclaim area marked in mg workshop. 3. delivery of the material will be given only after submission of reclaimable material 4. purchaser needs to remove debris, bricks, masonary, rubble, ac sheets, manglore tiles from the dismantling sites untill ground is fully clear before taking the delivery. 5. dismantling is permitted up to ground level only. below ground level does not be permitted. cutting is permitted. due care is to be taken by the bidder/purchaser to avoid unwanted mishapes at work spots. they should ensure to keep a safety banner around the work spot till it is completed since the locations are surrounded with working offices. 6. after removing/ clearing the rcc/ brick masonary rubbish from the spot only, the delivery of iron material will be affected. 7. contractor should take care of any cable while dismantling and digging. damage to railways shall be recovered as per extent rules. 8. part delivery is not allowed. 9. any mg/bg rail lines or pway scrap with or without attachments lying under or beneath of building/sheds/structures are not deliverable. 10. purchaser need to first dismantle the all buildings/sheds/structures then only delivery will be permitted. fdp 50 days.

Central Government/Public Sector

CTN :44942597

28 Apr, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot non ferrous scrap - 98230013 scrap released aluminium, mixed aluminium and aluminium casting mixed items such as frames, jali, patti, moulding, jali, avm,aws track magnet box, door closer,dome cover, box, sheet, pipes, wire, junction box, dv box, chequered plate, indicator frames, and other aluminium items at this location with or without major /minor attachments of ferrous, non ferrous, fibre, fibreglass, cloth, pvc, rubber, sponge, glass, glass wool, coal tar etc. with or without rust, dust, oil, cement, mud, wet and grease.un serviceable to railway use loading by purchaser. note: bidders are advised to see the lot physically . delivery will be made as on as it basis.

Central Government/Public Sector

CTN :44942576

28 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms sheet of various sorts and sizes, blower rotary forging, liner, guide fixtures, side frame fixtures, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand, salary bin, cupboard, structural items, different type of packing channels, trolley, lat, coach cut up parts, head stock, ms tank, grill gate, rolling shutter,wheel with plate, bins,regulator empty box, sliding doors, dolley, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam,brake blocks, gi sheets, pipe,square &rectangular tubes,stair case and handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt with or without brick and concrete,ladder,plate,grill, barricade, bolts, nuts, tray under frame, cut rod, rails of various sorts and sizes with/without concrete/brick/mud adhering,cut rails or rails used in support structures, coach head stock, coach parts,battery tray, ladder, all types of trolley wheels with minor nfs attachments, screens, channel post, sheets, stand, track machine cut up parts, ms pipes covered with or without rope &with or without parts of rubber, dome, vrla rack, vcb in dismantled condition, vrla battery box & clamp, stand, dtmf way station equipment box, led line display board, hydraulic lifting table with available fittings, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, ci pipes and fittings, ms plate, roofsheets, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, ticket punching cut parts, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, lt panels, ferrous electrical panel boxes,i beam,transmission rods,fissure plates, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, tap changer cover with fiber attachments, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, mdb w/o non ferrous attachments, st light tubular post, gi/ms window, luggage rack, ,bed portion of weighing scale l with or without any minor non-ferrous attachments and all other scrap excluding ms hand hold in fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings in as is where is condition.pl no 98050126. note:(1) cutting is permitted to loadable size and for heavy nature items only. 2) during delivery if any major non-ferrous items found the same may be handed over to custodian. 3) jcb/crane loading permitted. location: behind a row bin 3&4

Prefabricated Canopy Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors