Tender For e- tender for supply of spine, fms other implants high end - frame plate 3d (micro plates 0.2mm - 0.8mm), dermal matrix wound dressings size 10x25cm, dermal matrix wound dressings size 10x12.5 cm, dermal matrix wound dressings size 5x5 cm, jess fixators for hand fracture, suture anchors (for tendon achilles repair), rack for 8 instruments with clamp box, instrument case 130 x 230 x 25mm, micro scissors straight scissor blade 10mm, forceps with plateau tip 0.3mm smooth, micro forceps with plateau tip 0.6mm angulated, micro scissors curved - scissor blade 10mm, double clamps 24mm, 1.5 - 2.3mm vessel, double clamps 16mm, 1.0 - 2mm vessel, double clamps -11mm, 06-1.4mm vessel, single clamps 24mm, 0.6 - 1.4mm vessel, single clamps 16mm, 0.6 - 1.4mm vessel, microvascular single clamps 11mm, 0.6 - 1.4mm vessel, calcaneal fracture fixation plate and screws, lisfranc plate and screws, first 1st mtp fusion plate and screws, lapidus fusion plate and screws, mini tight rope for mallux valgus, ankle fusion plates, fibre wires, achilles tendon repair by speed bridge, foot plates, memory staples, tenodesis screws, syndesmosis repair with tight rope, suture anchors for brostrum repair, internal brace for brostrum repair, deltoid ligament repair using suture anchors, deltoid ligament repair with internal brace, autocart - all autologous cartilage regeneration, suture anchors for achilles tendon 5.5 mm double loaded with needles, extra osseous talotarsal stabilization (eotts) implant (sinus tarsi screw), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (large 2mm to 2.8mm), a)10 hole continuous plate (large 2mm to 2.8mm), a)6 hole with gap (large 2mm to 2.8mm), a)4 hole with gap (large 2mm to 2.8mm), a)3 hole with gap (large 2mm to 2.8mm), a)2 hole with gap (large 2mm to 2.8mm), h plate (large 2mm to 2.8mm), l plate right and left (large 2mm to 2.8mm), titanium strut plate 18 hole (large 2mm to 2.8mm), double y plate (large 2mm to 2.8mm), y plate (large 2mm to 2.8mm), a)20 holes adaptation plate (large 2mm to 2.8mm), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (medium plates 1mm-2mm), a)10 hole continuous plate (medium 1mm to 2mm), a)6 hole with gap (medium 1mm to 2mm), a)4 hole with gap (medium 1mm to 2mm), a)3 hole with gap (medium 1mm to 2mm), a)2 hole with gap (medium 1mm to 2mm), h plate (medium 1mm to 2mm), l plate right and left side (medium 1mm to 2mm), titanium strut plate 18 holes (medium 1mm to 2mm), x plate (medium 1mm to 2mm), double y plate (medium 1mm to 2mm), y plate (medium 1mm to 2mm), a)20 holes adaptation plate (medium 1mm to 2mm), orbital mesh (0.2- 0.4mm), screws for corresponding plate thickness of length 4mm, 6mm, 8mm, 10mm (micro plates 0.2mm - 0.8mm), a)10 hole continuous plate (micro plates 0.2mm - 0.8mm), a)6 hole with gap (micro plates 0.2mm - 0.8mm), a)4 hole with gap (micro plates 0.2mm - 0.8mm), a)3 hole with gap (micro plates 0.2mm - 0.8mm), a)2 hole with gap (micro plates 0.2mm - 0.8mm), titanium strut plate 18 holes (micro plates 0.2mm - 0.8mm), x plate (micro plates 0.2mm - 0.8mm), double y plate (micro plates 0.2mm - 0.8mm), y plate (micro plates 0.2mm - 0.8mm), a)20 holes adaptation plate (micro plates 0.2mm - 0.8mm), orbital rim (micro plates 0.2mm - 0.8mm), deformity reduction set, cobalt chromium rods 5.5 mm x 400 mm, mis battery or manual operated disc aspirator 1-2.5 mm, with 0.5 mm increment 13 - 19 gauge with 2mm increment straight or curved, anterior peek cervical standalone cage, intergrated peek cage with titanium screw locking mechanism 6mm-12mm length, self locking screw mechanism, 35 degree screw angulation cephedal to caudal, self drilling screws 3.5mm, 4mm, mis polyaxial set scerw accomadating 5.5mm rods, mis contoured or straight rods dia 5.5mm with sharp edge for edge for easy insertion, mis polyaxial screw with attachment option of plastic retractor for direct imaginga and visualization of rod, modified design for set screw insertion dia 5 t
Tender For corrigendum : supply of spares of control valves on door delivery basis including servicing at lauriya plant, west champaran, bihar - supply of spare parts for control valve as per below details:make: ksb-milsl no. 103684, 38-41412, size: 4 , ansi #2500, cv-35, act size: 18 -8a, tag:06-pcv-504, gland packing set, body gasket, seat gasket, plug stem assembly (s/a), seal ring, flat spring, cage, seal ring, yoke gasket, actuator packing, actuator diaphragm, spare parts for control valve as per below details:sl no. 102580, 38-41413, 6 , ansi #2500, cv-95, act size: 18 -8a, tag suv-01, gland packing set, body gasket, seat gasket, plug stem assembly (s/a), diffuser seat ring, cage, seal ring, flat spring, yoke gasket, actuator packing, actuator diaphragm, servicing of control valves, which carrying out repair & maintenance activities of the valves, replacement of spares, etc. as per the scope mentioned under the special terms & conditions of the tender.
Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; electrical system or installation, lift cage door and cables replacement job; service provider
Tender For bid to ras providing of repair and overhauling service - repair of six squirrel cage induction rotors of 160 kw ac compressor motors multiple ships; any other suitable brand; no; buyer premises
Tender For custom bid for services - wet leasing of welders with accessories for attending welding works of electric locomotives at elsaq for period of 02 years: a schedule 1- activity basedi. machine shop section 1 repairing of loco pilot seat 700 nos. 2 providing transducer protection cover 200 nos. 3 loco side buffer revit cutting 860 nos. 4 loco side buffer reviting 860 nos. 5 tmb dome repairing 100 nos. 6 conservator shifting bracket fabrication 100 nos. 7 conservator shifting bracket fixing in loco 100 nos. 8 transducer protection cover fabrication 200 nos. 9 loco body repair at various locations 100 nos. 10 conservator shifting bracket support patti fabrication 200 nos. 11 sander box cover fabrication 200 nos. 12 loco cattle guard support patti fabrication 400 nos. 13 mrb duct supporting patti fabrication 300 nos. 14 fire box supporting bracket fabrication 100 nos. 15 cbc handle supporting bracket fabrication 300 nos. 16 various stiffeners fabrication 2000 nos. 17 checker plate fabrication repairing 100 nos. 18 test bench fabrication 20 nos. 19 fabrication of working table 20 nos. 20 day to day work of various section 700 nos. 21 gas cutting work 700 nos. ii tm section 1 bellow plate welding- one unit (one loco). during minor schedule of locomotives. 9600 nos. 2 ms net (jally) welding + temp sensor 6 block+ miss. work- one unit (one loco) during minor schedule of locomotives. 9600 nos. 3 bellow plate welding ms net (jally) welding & broken bolt removal. (one unit for 1 tm) 1800 nos. 4 removal of labyrinth by gas+ scrapping of condemn material +misc. wok on shop floor. (one unit for 3 tm) 1800 nos. iii pn section 1 provision of bp/fp protection cage involving cutting & removal of old or damaged protection cage by welding or gas cutting & provision of new cage of each cab. 300 nos. 2 reconditioning of damaged pipe lines of bp/fp/mr/db of each cab involved cutting of old damage pipe & provision of new pipes by welding, qty-01 no. (anyone) 400 nos. 3 provision of clamp bracket s involving old clamps bracket/ foundation removal & provision of new clamp s bracket / foundation at individual location.- qty-01 no.( anyone) 1000 nos. 4 ico activities involving one loco 100 nos. i) welding & cutting work involved in shifting/relocating of pn equipments. ii) cutting of brake fulcrum bracket edge of each bogie. iii) provision of bogie frame centre clamp bracket of each bogie. iv) other clamp bracket welding work. 5 bp, fp, mr & db hose rest plate welding rest plate 01no. (anyone) 400 nos. 6 brazing/ annealing of copper pipe. single pipe- 40 nos. 7 miscellaneous welding work involving welding of nipples/thread piece & dummy. qty-01 no. ( anyone) 200 nos. iv aoh section 1 dead weight stopper cutting & welding work. 250 loco 2 sctm duct modification work in new ic0 loco involving cutting & welding work & misc. work in same loco. 100 loco 3 misc. work like hood clamp, duct clamp, earthing clamp welding & misc. work in u/schedule loco. 500 loco v miscellaneous welding activity of 30 minutes 2000 nos. total b schedule 2- material component i various accessories for welding / cutting 1 apron nos. 8 2 hand gloves set 32 3 welding holders (esab/ metal arc make) nos. 14 4 industrial shoes. (bata or emperor make) set 8 5 helmet (prima / esab make) nos. 4 6 pant & shirt set 16 7 name badges nos. 4 8 chipping hammer nos. 8 9 wire brush nos. 16 10 cutogen sets (esab / sharp cut make) nos. 2 11 welding shield nos. 8 12 goggles. nos. 4.
Tender For corrigendum : repair and maintenance of piaos including providing and fixing ms cage on the top of piaos for protection of water storage tank from monkeys, birds and theft etc. at nsm and nfm azadpur