Latest prefabricated toilet block Tenders | Government prefabricated toilet block Tenders

Central Government/Public Sector

CTN :45593623

25 Jun, 2026 NA

Ambasamudram - Tamil Nadu

Tender For supply of ladder trolley confirming to rdso spec: tm/sm/465,ladder trolley complete set generally confirming to rdsospecification no. tm/sm/465 dated03.02.2014 (rev 01 of 2020) enclosed with following minor deviations. 1. each trolley set comprisesof (1) wheel andaxle 2 nos. (2) detachable frame- 1 no. and foldable ms ladder-1 no. 2. the wheel and axle set, frame for thetrolleyand the ladder for the trolley shall be as per the drawing enclosed. 3.the materials especially steel used forfabrication of wheel and axle should confirm to relevant standards wherever applicable. only isi marked, brandedms pipe should be used for fabrication of ladder. the finished ladder should be given one coat of anticorrosivepainting 4.seating arrangements, any arrangement for tool box are not required in the trolley though mentioned in therdso specification. 5. where there is any minor deviation in the dimensions between the drawing and the rdsospecification is noticed if any, the dimensions in the enclosed drawing shall be adopted. 6. suitable insulating pad orsimilar insulating material should be provided in the axle such that the two wheels of the axle are not electricallyshorted. 7.prototype approval for the finished trolley is not mandatory but preferred. 8. inspection will be carried out byconsignee. encl: 1. rdso specification no.tm/sm/465 dt.03.02.2014 (rev 01 of 2020) 2. drawing no.m/trd/sk/589 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45589217

29 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of design, fabrication and installation of customized transparent polymer enclosure around blowing booth area for staff safety, covering approximately 560 sq.ft. the transparent consumable polymer sheet should provide clear outside visibility and shall be easily removable and replaceable in future due to dust and dirt accumulation. the supporting steel structure shall be properly fabricated and welded above working height level. the polymer sheet fixing arrangement shall be movable and easy for maintenance. approximate enclosure height shall be 7 feet with suitable length as required. all materials, fabrication and installation works are included in the scope [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45591923

23 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For fabrication and supply of carbon steel headers (pressure part items) with bhel material (osb) and transportation of finished goods to anuppur project site, madhya pradesh

Central Government/Public Sector

CTN :45592729

08 Jul, 2026 NA

Asansol - West Bengal

Tender For manufacturing/fabrication, assembling and supply of automatic butterfly damper in waste gas tunnel, manual slide gate in waste gas tunnel, explosion flaps for gas mains and cast-iron liner for coke wharf _pkg. sm-202_ required for installation of stamp charged battery no.-12 of iisco steel plant _sail-isp_ at burnpur, asansol _wb_.

CTN :45578667

01 Jul, 2026 NA

Jalgaon - Maharashtra

Tender For providing of custom bid for services - outsourcing of various operation for unit load (services for unit load two layer - press work, fabrication, welding, phospating, painting/ powder coating & rubber/foam pasting for manufacturing of steel unit load two layer 6..

CTN :45587225

08 Jul, 2026 9.62 Lacs

Udhamsign Nagar - Uttarakhand

Tender For supply of supply, fabrication and construction of copper plate earthing details of electrodes and earth pit at akashvani jaspur, uttarakhand , providing of 50mm x 3mm copper strip and interconnecting earth electrodes with fabrication and fixing of 50mm x 3mm copper strip at akashvani jaspur, uttarakhand , providing and fixing of nomenclature sign marker for earth pits at akashvani jaspur, uttarakhand , providing of 25 mm x 3 mm copper strip for extension of earthing system up to the transmitter hall, ups and lt panel at akashvani jaspur, uttarakhand , copper strip laying for extension of earthing system up to the xtr hall, ups and lt panel and terminating in bus bar by digging the soil and placing the copper strip along the trenches at air jaspur , providing of 375x38x6mm copper bus bar with insulators and steel nut bolts and the fixing of 375x38x6mm copper bus bar is to be done to terminate the different earthing system at akashvani jaspur , making of trenches of size 700mm x 750mm for 185 sq mm 3.5 core starting from state electricity transformer to lt panel by digging the soil which includes cement concrete interlocking tiles , providing and grouting of 2 nos. of 4inch dia g.i. pipes of different length on the cement concrete flooring, road, and cement concrete interlocking tiles and along the vertical walls. , unwinding roll of 185 sq. mm 3.5core al. cable from their cable drum and laying the cable through the trenches and through the g.i. pipes as laid down at akashvani jaspur , reconstructing the cement concrete interlocking tiles floor and repairing the area with cement concrete interlocking tiles and finishing the surface at akashvani jaspur , providing and fixing of lt cable route marker made up of 2.5inch dia signage with 10mm x 2ft long ms rod from transformer to lt panel at akashvani jaspur , providing and fabricating of overhead shed for the installed 62.5kva dg set as per drawing at akashvani jaspur supply, fabrication and construction of copper plate earthing details of electrodes & earth pit as per given below: digging of pit of size: 1 mtr x 1 mtr x 3.5 mtr(d) providing of copper plate size 600 x 600 x 3mm. providing of copper strip of 50x3mm shall be extended from bottom of the earth pit to the surface of the earth pit, after joining the copper strip by copper rivets and proper brazing of strip to the copper plate. providing and fixing the 10ft. long 38 mm dia class c g.i pipe of reputed make such as surya, jindal or similar and fixing with the copper plate in the center with g.i/ ss nut bolts class c. one g.i. reducer at the top of the pipe is to be provided for fixing steel mesh for watering as shown in the drawing. placing the copper plate with pipe and strip into the pit. providing & filling of 2 nos. of bags of bentonite each of 50 kg. (for each earth pit.) providing & filling of 80kg charcoal, and 80kg raw salt in alternate 3 to 4 layers in each earth pit. the fresh soil about 2.0 cubic metre in earth pit size in layers is to be arrange to fill the pit for proper result. proper watering of the filled pit for initial charging of pits. providing of heavy duty c.i. cover with lifting hooks. construction of cc chamber in ratio 1:4:8 & fixing of heavy duty c.i. cover., providing of 50mm x 3mm copper strip and interconnecting earth electrodes with fabrication & fixing of 50mm x 3mm copper strip as per given below: i. 2 grid out of 6 pits for transmitter. ii. 1 grid out of 3 pits for audio. iii. power supply-3 pits separate (lt electrical panel, ups & isolation transformer, avr) iv. rf //bid details 2 / 25

CTN :45525406

22 Jun, 2026 NA

Pondicherry - Pondicherry

Tender For main work : construction of canteen building for the puducherry technological university inside the ptu campus under rusa fund. sub work : providing and fixing of kitchen chimney, gas pipeline connection and kitchen equipment for the canteen building inside the ptu campus under rusa fund (iii call) - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

CTN :45558651

20 Jun, 2026 NA

Gadchiroli - Maharashtra

Tender For supply of material to gram sabha tirkameta for construction of 250 mt krishi godown - cement, metal 80 mm (crusher), sand, metal 40 mm (crusher), steel, plastic emulsion paint, profile sheet, kota stone, oil paint, name board., powder coated lowaered window, alluminiunm, anti termic treatment liquid, bricks, rolling shutter, z type grill ventilaor, exterior emulsion paint, oil paint, structured stall fabrication, ventilator grill, bolt and nuts

Central Government And Public Sector

CTN :45525671

13 Jul, 2026 38.80 Lacs

Mumbai - Maharashtra

Tender For renovation of supply air-conditioning system of k-4 and k5 with other accessories for rlg, barc, mumbai - design, fabrication, supply, installation, testing and commissioning of chilled water base double skin 10000 cfm ahu (without blower) as per clause no. 01 of technical specification., supply, fabrication and installation of ms supporting structures as per clause no. 02 of technical specification., design, supply, fabrication and installation of galvanized steel sheet for discharge air ducts as per clause no. 03 of technical specification., supply and installation of magnehelic gauge pressure range 0 to 25 mm wc including fittings as per clause no. 04 of technical specification., supply and installation of pressure gauges (0 to 7 kg/cm2 range) including fittings and ss ball valve as per clause no. 05 of technical specification., supply and installation of bar stock type ss thermowell with temperature guage as per clause no. 06 of technical specification., supply, fabrication, welding, installation, testing & commissioning of 80 mm nb schedule 40 carbon seamless steel pipe line including fittings as per clause no. 07 of technical specification., supply, fabrication, welding, installation, testing & commissioning of 100 mm nb schedule 40 carbon seamless steel pipe line including fittings as per clause no. 07 of technical specification., supply, fabrication, welding, installation, testing & commissioning of 125 mm nb schedule 40 carbon seamless steel pipe line including fittings as per clause no. 07 of technical specification., supply, installation, testing & commissioning of 50 mm size cpvc pipe with fittings as per clause no. 08 of technical specification., supply, installation, testing and commissioning of 100 nb mm dia flange ended gate valve ( ci body and gun metal internal)with suitable fittings and counter flanges for pipelines as per clause no. 09 of technical specification., supply, installation, testing and commissioning of 80 nb mm dia flange ended gun metal gate valve with suitable fittings and counter flanges for pipelines as per clause no. 9 of technical specification., supply, installation, testing and commissioning of 80 nb mm dia globe valve with suitable fittings and counter flanges for pipelines as per clause no. 10 of technical specification., supply and installation of all-around cold insulation saddles for chilled water pipeline along with fixing fittings as per clause no. 11 of technical specification., supply and installation of aluminium construction powder coated air diffuser along with volume control damper as per the clause no. 12 of the technical specification., supply and installation of 38 mm thickness close rubber cell cold insulation of classo fire rating followed by aluminium clading as per clause no. 13 of technical specification., supply, fabrication, installation and commissioning of the ss structural material including ss hardware. as per clause no 14 of technical specification., fabrication, supply and installation of ss construction multilouvered volume control dampers (vcd) along with electricaly operated modulating type actuator as per clause no. 15 of the technical specification., supply, fabrication and installation of plenum connection to existing blower as per clause no 16 of the technical specification., dismantling, segregation, removing & shifting of various equipment like ahu, insulated pipes along with supports, fittings, valves etc. as per the clause no. 17 of the technical specification.