Latest pressure gauge scrap Tenders | Government pressure gauge scrap Tenders

CTN :40105556

13 May, 2025 5.66 Crore

Ferozepur - Punjab

Tender For procurement of flood relief material other equipments - fiber boat, alluminium boat, inflamable boat with obm engine of 3c bhp, boat trailer, obm engine, water pump set with engine, plastic pipe 4" ( in feet ), life jacket, rain coat, tent, trunk, gum shoes, umbrellas, search light, inflamble tower light, battery 4 cell, baitra, battery chargeable, generator set ( 5 kva ), oars lock, bamboo, tarpal, polythene sheet, kille, chappu, hooks, cement bag ( khali boriyan ), rain gauge, water bottle, thermos bottle, candles, mug, kambal and bed sheets, lifebuoy, tubes, rope ( 50 feet ), rope ( 100 feet ), match box, throw bags, frp rowing boat, wooden planks ( 6 feet * 1.5 feet ) thickness 2.5 inches, ms annealed wire ( 85w 4mm (dia ) in quentals, packing needles ( 5 inches ), commercial multipurpose plastic packing thread in quentals., chiken wire mesh ( 5 feet width ) in bundles, big boat, emergency lights, mosquito net

corporations/Associations/Others

CTN :40085322

30 Apr, 2025 NA

Kolkata - West Bengal

Tender For supply and installation of 5 hp submersible pump, rain gauge, white zinc, grease with water and sanitary line of old building and deeper sump and repairing of latrine and bathroom of old office building with allied works at bdps.

Central Government/Public Sector

CTN :40091196

13 May, 2025 15.00 Lacs

Thiruvananthapuram - Kerala

Tender For supply of meteorological instruments and charts - hyetograph charts , hygrograph charts , thermograph charts , barograph charts , whirling psychrometer , clock mechanism and drum for srrg , clock drum for hygrograph , clock drum for barograph , clock drum for thermograph , rain measure type i , rain gauge non-recording , cup counter anemometer , wind wane , rain gauge recording , straight sunshine recording cards , short curve sunshine recording cards , long curve sunshine recording cards , hair hygrograph , barograph aneroid , thermograph bimettalic , maximum thermometer , minimum thermometer , dry bulb thermometer , wet bulb thermometer , single stevenson screen , double stevenson screen

corporations/Associations/Others

CTN :40078921

01 May, 2025 NA

Margao - Goa

Tender For supply of self recording rain gauge

Central Government/Public Sector

CTN :40064846

10 May, 2025 8.25 Lacs

East Singhbhum - Jharkhand

Tender For tender for supply of rain water harvesting - earth work in excavation over areas (exceeding 30 cm in depth , one and half mtr in width as well as 10 sqm on plan) including disposal of excavated earth lead up to 50m and lift up to one and half mtr , dispose earth to be level and neatly dressed complete as per the instruction of engineer-in-charge.all kinds of soil/ soft rock/ weathered rock , return earth filling by available excavated earth (excluding rock) or locally available sand in trenches , plinth , sides of foundations etc. in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming(allow for breading up lumps , shrinkage etc.) watering lead upto 50 metre and lift up to 1.5 m complete as directed by the engineer-in-charge , providing and laying plain cement concrete 1isto3isto6 (1 cement isto 3 coarse sand isto 6 graded stone aggregate 20mm nominal size )in foundation , plinth wherever necessary including desalinating , finishing , curing etc. as per specification all complete but centring and shuttering etc. , providing and laying reinforced cement concrete work 1isto1.5isto3 (1 cement isto 1.5 coarse sand isto 3 graded stone aggregate using 20 mm down screened and washed) including machine mixing , placing in position and mechanically vibrating in footing , column , plinth beam up to plinth level and like including preparing of the top surface finishing curing ecomplete in all respects as per specification and direction. , hire and labour charges for providing and fixing straight shuttering for concrete works to anywhere at any floor (including staging) including strutting , propping etc. and removal of form or striking out after completion of works as directed and specified by the engineer-in-charge. a) foundations , footings , bases of columns plinth beam etc , steel reinforcement (for reinforced cement concrete work) including transporting , decoiling , straightening , derusting , placing , cutting to requisite length , hooking , bending to correct shape , placing in proper position and binding with 16 gauge black annealed wire at every intersection including removal of loose rust and applying a coat of cement wash if necessary complete in all respects as per drawing and at any floor as directed. , brick work with common burnt clay modular bricks of class designationisto cement mortar 1isto6 (1 cement isto 6 coarse sand). 7.5 in foundation and plinth inisto , 12 mm cement plaster of mix isto 1isto 4 (1 cement isto 4 coarse sand ) , supplying , filling , spreading & leveling stone boulders of size range 5 cm to 20 cm , in recharge pit , in the required thickness , for all leads & lifts , all complete as per direction of engineer-in-charge. , supplying , filling , spreading & leveling gravels of size range 5 mm to 10 mm , in the recharge pit , over the existing layer of boulders , in required thickness , for all leads & lifts , all complete as per direction of engineer-in-charge. , supplying , filling , spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit , in required thickness over gravel layer , for all leads & lifts , all complete as per direction of engineer -incharge. , supplying pea gravel as per direction of engineer -incharge. , supplying upvc slotted pipe 100 mm dia as per isisto12818 as per the dircetion of engineer -incharge. , supplying u-pvc pipes (working pressure 4 kg per cm square) single socketed pipe 110 mm dia as per the dircetion of engineer -incharge. , supplying upvc coupler for upvc drainage pipes 110 mm as per the dircetion of engineer -incharge. , supplying upvc bend 87.5 degree 110 mm bend as per the dircetion of engineer -incharge. , supplying upvc pipe clip 110 mm bend as per the dircetion of engineer -incharge. , boring/drilling bore well of required dia for casing/ strainer pipe , by suitable method prescribed in isisto 2800 (part i) , including collecting samples from different strata , preparing and submitting

CTN :39872679

23 Apr, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras purchase of spares - gasket head , seal , seal water , cartridge lf 3664 , o ring , gasket , gasket , screw( beml , fig 1045b , sl no 40) , piston ring assy(fig 2350) , gasket , gasket , o ring , o ring , gasket intake , gasket , gasket , gasket , o ring (ctlg fig 2210) , seal rear , gasket , seal oil , cartridge pre-filter (fig 4110 service kit) , cartridge , o ring , seal oil , interlock shaft(fig 24&2135) , thermostate , valve exhaust(fig 1010) , valve intake(fig 1010) , bolt , nut , hose , o-ring , hose l 1200mm , hose , bolt , bolt , bearing ball , filter element (outer)(fig 1411) , hose spill , hose(bd50 eng) , gasket , gasket oil inlet , pre filter assy , hose pre filter to fine(fig 4110) , hose (bemal price list p 700) , hose , hose , valve , element inner(fig 1411) , gasket , hose(fig 1410) , dust indicator(fig 1410) , o ring , cap , o ring , oil pump assy , o ring , o ring , o ring , packingdust , clamp , gauge oil level , tapered roller bearing pump end 2 , gasket , oil seal (ctlg fig 4021) , regulating sleeve , gasket , gasket (ispl 497tc governor sl no141) , nozzle (ims old) , rsv gov service kit , pumping element , gasket , o-ring , tapered roller bearing pump end 1 , valve (ispl 497tc feed pump) , spring , hand priming (ispl 497tc feed pump) , sealinf ring for 14 & 19 , sealing ring for 4 (mico) , ring seal , plug drain , gasket , thermo housing , bearing main one pair u s 0.25mm , bearing con rod pin , u s 0.25 mm , piston (ctlg fig no 2350 sl no 1) , cylinder liner , alternator assy , pin piston , ring snap , gasket/seal oil , seal front , cylinder head gasket kit(fig k1) , cyl block gasket kit(fig no k2) , turbocharger assy(fig 1510) , air cleaner assy(fig 1410) , rain cap(fig 1410) , bearing thrust std(fig 2310 15) , seat valve exhaust std(fig 1010) , breather assy(fig 1150) , muffler(fig 1610) , gasket , v belt , seal , oil , seal front (front cover & gear) , spring valve , element assy(fig 1411 1) , hose , tube , tube (fig 2232) , tube , tube , con rod assy , push rod , oil cooler assy , packing dust (bd50 nozzle fuel injector) , nozzle holder assy , cap assy , tube , switch , heater (pot)(fig 1310) , bolt , bushing cam , bolt , fan , spacer fan (bd50 fig no 5010) , bushing , water separator assy , cotter , valve

CTN :39989858

22 Apr, 2025 NA

Ratnagiri - Maharashtra

Tender For supply of self recording rain gauge

CTN :39964754

29 Apr, 2025 NA

Darjeeling - West Bengal

Tender For supply of tmt bar fe 550 grade 8mm dia , tmt bar fe 550 grade 10mm dia , tmt bar fe 550 grade 12mm dia , tmt bar fe 550 grade 16mm dia , binding wire of 0.9mm dia , plywood 8 feet x 4feet x 18mm bwr grade , pre fabricated mild steel door size 3000mm x 2400mm as per technical specification , pre fabricated mild steel door of size 1500mm x 1830mm , app bitumen membrane sheet of grade 2504 thickness 3 point 0mm type film size 20mx1m , deck sheet curved shape 1 point 20mm tr 50 , quick setting compound , water proofing compound in 1 kg packing , fire resistance paint for internal surface , fire resistance primer for internal wall surfaces , synthetic enamel painting to steel surfaces as specified , red oxide primer , bitumen 80 oblique 20 grade , hdpe pipe rain water pipe 75mm dia , fire extinguisher a b and c type portable net 2 kg capactiy cylindrical , solar lantern , lighting conductors complete set , prefab steel ms plate of size 1000x1000x4mm to frame of size 1050x1050mm , hdpe hose pipe 25mm dia , 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set , pcc solid block 400x200x200mm plus minus 10mm minimum strength 50kg oblique sqcm , 100mm thick interlocking tiles , cement ppc oblique opc 53 grade in poly bag of 50 kg each , sand coarse , stone aggregate coarse 20 mm , stone aggregate coarse 40 mm , 02 x skilled labour charge , hesco basket portable as per drawing attached , transparent pipe 5mm dia bore for water leveling , iron bar 600mmx16mm , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle , fish line , plumb bob iron , galvanised iron pan mortar tasla 18 gauge 16 inch dia , rammer earth with handle , picks axes with chiesel and point ends kudali 14 cp , showel square nose 14 gauge blade size 310 x 245mm shaft size 710mm fitted , painting brush 100 mm , synthetic tarpaulin 550 gsm of size 30ft x 30ft green , multipurpose non slip rubber reusable gloves , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia , ms centering plates of size 90cm x 60cm of thickness 14 guage with two stiffeners , portable ms body needle vibrator machine with power 3 hp to 5 hp petrol engine

State Government

CTN :39950806

24 Apr, 2025 NA

Kozhikode - Kerala

Tender For supplying labours for running and maintenance of h&m stations in kozhikode district for the year 2025-26 under investigation division, kozhikode- running and maintenance of h&m stations in kuttyadi & mahe basin at kozhikode district - taking readings from departmental rain gauge stations at poozhithode, passukadavu, muthukad, poothampara, vilangad and from weir gauge station at chathankottunada for the period from 01-05-2025 to 31-03-2026 (11 months).

State Government

CTN :39950808

24 Apr, 2025 NA

Kozhikode - Kerala

Tender For supplying labours for running and maintenance of h&m stations in malappuram district for the year 2025-26 under investigation division, kozhikode- running and maintenance of h&m stations at kerala bhavani in palakkad district & chaliyar basin in malappuram district - taking readings from departmental rain gauge stations at pudur, pattimelam, thekkuvatta, chokkad, valanthodu & taking readings from departmental river gauge station at peedikappara for the period from 01-05-2025 to 31-03-2026 (11 months).

Pressure Gauge Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government