Latest pressure reducing station Tenders | Government pressure reducing station Tenders

Central Government/Public Sector

CTN :45220438

25 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - 98080015 scrap ci brake blocks , pig iron pieces, l-valve, rusty and dusty pig iron pieces, set of cylinder for main cp, pipes, d.v, pipe fitting, valve, pulley, fbvp angle cock, brake shoe complete, cylinder for loco compressor, audco valve and other miscellaneousellaneous ci items of parts and fittings, and other miscellaneousellaneouswith or without attachments. parts and fittings, unserviceable

Central Government/Public Sector

CTN :45220473

25 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - scrap ci items and m.s. items such as sluice valve, distance block sorts and sizes, ci brake block, pulley, pointmachine, ci pipe, pig iron, ci tank, water column pipe with minor nf attachment, wrought iron blocks, bearing plate, acb plate, ci chair plate,submersible pump,elbow, bench vice, weighing machine & parts, casting die, platform bench lag, ticket dating machine, punch machine, swing machine, weight and counter weight, signalling foundation, tank, fan case, shaft, anvil, tube, bearing plate pieces, valve, coupler, flange, plate, chain, platform bench with c.i. and m.s., pully block, structure, siphone, trusses, signalling items, diversal wheel,c.i. structure, frame, platform bench with c.i. and m.s. tie bar, bracket etc. with or without other ferrous and minor nf attachment old used and u.s

Central Government/Public Sector

CTN :45145874

19 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ferrous cast iron consisting of pully brake block, brake disk, cylender head & linner,cst-9 sleeper with or w/o tie bar, sluice valve, gate valve, tee, sistern, benches, weigheing m/c parts, plateform, pipe, socket, elbo, pump-part, sig. pedastal, brake pad, fly wheel, damage-machine, c.i. band, tappet, billet, cut of angle -cock, flange, dirt collector, ballencing weight,tub, blower, switch board, machine brake disc & other cast iron items released from loco, carriage, sig, trd, tmc, p.way, electric,etc of short & sizes with ferrous steel and - n.f. attachment if any. note :- 1.loading by purchaser. 2. delivery not allowed against part payment. 3. hammering allowed at the time delivery. 4. cutting not allowed. location: lying in bin no.-a-10

Central Government / Public Sector

CTN :45146096

19 May, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12242ci26b, 98081317, quantity- 26.465 mts scrap condemned unserviceable ci material consisting of weights, wheels, color light body, color light base, weighing machines, ci valves, tracer valve, sequence valve, proportional systems control valve, ms-ci body of electric detectors, pean, peas, rcrb, leveling values, cocks un loader scale, non-return values, ci- ms hand pump, ci lift counter weight, isolating cock, drain valves, passenger emergency alarm valve, ci bmbc piston, pedestals, blocks, rollers, pump set bodies, base plates, moulds, gate valves, distribution valves cocks, boxes, hose pipe cocks, dirt collectors, brake units, trolley wheels, s and t wheels, lever boxes, pipes, structural and round ci bases, cut off angle cock, ci wsf ep unit value, wsfar bulb, cell base, lhb brake disc, wsf magnet, isolating cock, peasd, nrv, crp, axle compressor spare parts, ekt%u2019s, e type locks, control reservoir, ci anti vibration mounting pad, filter housing, hydraulic return line, ci vertical pneumatic value bmbc spares, ciwra bodies, cylinder heads, lhb brake disk, traction motor, pneumatic valves, water column stanchion, head turner cylinder, cooling fans, magnet valve and other ci material of sorts and sizes with or without attachments of ms. location- bin no-242, left side of road no- 2. hsn code- 72041000. gst- 18 percent note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery.

Central Government/Public Sector

CTN :45134659

19 May, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned various rejected ms spares items with or without ss or ci attachments is as below and as available in the location. delivery will be given as is where is basis. approximate weighment of above items is 932kgs. note: purchaser can inspect the materials thoroughly before e-auction, lot will be delivered as is where is basis only. 1). 13 teeth sprocket : qty. 26 nos. wt. 4.0kg/no. total wt. 104kg. approximately. 2). 14 teeth sprocket : qty. 10 nos. wt. 3.4kg/no. total wt. 34kg. approximately. 3). 32 teeth sprocket : qty. 04 nos. wt. 11.2kg/no. total wt. 44.8kg. approximately. 4). 20 teeth sprocket : qty. 15 nos. wt. 3.9kg/no. total wt. 58.5kg. approximately. 5). plummer blocks (small) : qty. 16 nos. wt. 3.4kg/no. total wt. 54.4kg. approximately. 6).plummer blocks (big) : qty. 13 nos. wt. 6.8kg/no. total wt. 88.4kg. approximately. 7). directional control valve (small) : qty. 04 nos. wt. 3.0kg/no. total wt. 12.0kg.appr. 8). directional control valve (big) : qty. 02 nos. wt. 10.8kg/no. total wt. 21.6.0kg.appr. 9). safety fire ball valve : qty. 01 no. wt. 7.0kg/no. total wt. 7.0kg.approximately 10).load hook (small) : qty. 06 nos. wt. 17.0kg/no. total wt. 102.0kg.approximately. 11).gear coupling : qty. 04 nos. wt. 10.5kg/no. total wt. 42.0kg.approximately. 12).load hook (big) : qty. 02 nos. wt. 80.0kg/no. total wt. 160.0kg.approximately. 13).wear plate (broken) : qty. 02 nos. wt. 18.75.0kg/no. total wt. 37.5kg.approximately. 14).filter cell : qty. 01 nos. wt. 21.0kg/no. total wt. 21.0kg.approximately. 15).support block : qty. 01 nos. wt. 33.6.0kg/no. total wt. 33.6kg.approximately. 16).bend saw blades : qty. 04 nos. wt. 0.9kg/no. total wt. 3.6kg.approximately. 17).ball screw rod : qty. 01 nos. wt. 3.2kg/no. total wt. 3.2kg.approximately. 18).pulley : qty. 02 nos. wt. 17kg/no. total wt. 34kg.approximately. 19).pivot pin nut : qty. 03 nos. wt. 11.8kg/no. total wt. 35.4kg.approximately. 20).dia pulley assembly : qty. 07 nos. wt. 5.0kg/no. total wt. 35kg.approximately. total 20 items approximate weight : 932.0kgs. delivery unit : in number.

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

Central Government / Public Sector

CTN :45084416

21 May, 2026 NA

Guntakal - Andhra Pradesh

Tender For auction sale of others - mixed scrap - 80.000 mt- delivery on actual weighment basis only. lot no. 5321 25 04 61 gtl gtl mixed ap available with sse dsl gtl scrap cond. u/s beyond use mixed ferrous scrap (ms & ci). released assorted scrap consisting of 50 items: (1) cattle guard (2) cylinder heads (3) tm end shield (4) outer end liner bearing caps (5) knuckle (6) cbc (7) draft gears (8) side buffers (9) equalizing beams (10) compressor liners (11) compressor housing (12) water pump (13) lube oil pump (14) brake adjusters (15) screw coupling (16) gear cases (17) compressor heads (18) extension shafts (19) cam gears (20) extension gears (21) pulleys (22) cam shafts (23) sucs (24) pull rods (25) system pipe liners (26) cattle guard supporters (27) axle box distance pieces (28) horn box liners (29) brake hangers (30) fttm, rttm blowers (31) intermediate casings (32) after cooler housing (33) m6 turbo support (34) axle box covers and plates (35) fip supports (36) ms plates & angulars (37) carbody filters (38) ecc guards (39) cylinder head valves (40) push rods (41) derators (42) fasteners of different sizes of locomotive (43) ms plates (44) focus lights housing (45) other scrap items related to loco assorted scrap (46) centrifuge base (47) fuel oil headers (48) valve lever assembly (49) main bearing shells (50) connecting rods total qty: 80.000 mts (approx) as per ds-8. available at ferrous scrap yard , diesel loco shed, guntakal. ds-8 no: 053211050 dt.13.02.26. hsn code: 720429 - gst 18%. note to the bidders 1) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2) post auction no representation shall be entertained.3) for photos of this lot, kindly click on view lot image on bottom left side. 4) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description 5) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7) clubbing of the lots, what so ever, is not permitted for loading 8) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr. dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 9) railways does not guarantee for quality, quantity description etc.

Central Government/Public Sector

CTN :45000768

04 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - 98080106: cond. & u/s. ms/ci/gi item scrap consisting of signal items, ground connection, lock rod, point machine parts, loco parts, gears, slide cover, cams, beaters, bars, ms rod/angle /channel/pipe cut piece, bm box, pipe fittings, screw couplings, coupling hook, signal three aspects, signal two aspects, cast iron components, pressure tank, augers, dip lorry, ms trolly, tension rod, plate, large pipe,signal post, fastners, pick axe, beaters, crow bars, lever, train coach door broken parts, ms stand, weighing set, motor case, compressor case, compressor valve, ms tank, nut, bolt, tool box, ci linked pots, chain, damper, l c gate parts and tap, valve, gear case, flat rod, rottery key, grill, pulley, air filter, fencing, hood, boiler tube, winch wheel, steel rope, ladder, battery boxes, frames, ms boxes, ring, ci foundation ct boxes, loco liner, buffer, buffer case, buffer plunger,icf buffer complete set, piston, piston cylinder, connecting rod, signal posts ,bearing case, tension rod, cam shaft,ms cut pieces,pipes, pump case, pta parts,shock absorber,e type lock,d bracket,axle box housing,end shield,cast iron component,trolly parts, hyd scissors table,air suspension system, pipe,ladder, pantograph parts, ms hood tap and such other similar signal,cut pieces of mast, loco and c&w items with or without non ferrous and other attachments as is where is condition. note: (1) if any non- ferrous items found in loose in the location to be handed over to custodian at the time of delivery, (2) crane/jcb loading permitted (3) cutting permitted to loadable size at the time of delivery. 4).material available in first location have to be removed first. location: in two locotion:1)b-2 and w-48,below camera of scrap yard/ssd/ptj.

Central Government/Public Sector

CTN :44934731

29 Apr, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap loco parts consist of gear casing embedded with cardium , side buffer, cbc, draft gear, feed valve, angle cock, sander valve, dumper, pully, pinion shaft, end frame de, end frame nde, hs end shield, hs pinion, rollers, deflector, bolt, , outer drum,, shaft, ecc coil, cow catcher, knuckle, yoke pin, clevis, lock, follower plate, inner , outer, and secondary coil spring, conv inner thrust collar, middle lock plate, distance piece, loose lip, space ring, abutment ring, plain racer, lipped racer, thrower, axle box cover, end small plate, carbon plate, with or without nf and ci and other attachments. location- a by 1

corporations/Associations/Others

CTN :44908252

24 Apr, 2026 NA

Barmer - Rajasthan

Tender For auction sale of mixed iron scrap(ci alloys,ms,erw pipe etc.),bearing scrap,steel wire rope scrap,g.i.scraps(scrap sheet light mat),plastic item,motor parts scrap,radiator scrap(copper/brass),fire extiguser valve(brass item),battery scrap(01 no battery)(unservicable),empty plastic jaricon of capacity-35ltr,empty plastic jaricon of capacity-20ltr

Pressure Reducing Station Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors