Latest pressure reducing valve Tenders | Government pressure reducing valve Tenders

corporations/Associations/Others

CTN :41595267

10 Sep, 2025 2.10 Lacs

Haveri - Karnataka

Tender For dma/hvr/2025-26/water supply materials annual maitainance/ts - electrofusion reducer 90 by 75 mm, pvcbend140mm dia, pvcbend75mm dia, pvcelbows180mm dia, pvcelbows160mm dia, pvcelbows140mm dia, pvcelbows110mm dia, pvcelbows90mm dia, pvcelbows75mm dia, pvcelbows63mm dia, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron di conforming ti is1865 with the latest amendments and of grade ggg 40or50, provision for corresponding dia ms flanges should be made in the estimate.etc. comple for sluice valve of pn 10and 200mm, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron di conforming ti is-1865 with the latest amendments sr rates of valves and provision for corresponding dia ms flanges should be made in the estimate. etc. completfor sluice valve of pn10.0 and 150mm , providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron di conforming ti is-1865 with the latest amendments and of grade ggg 40 50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and 100complete specification as per item no2.23.2, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile irondi conforming ti is 1865 with the latest amendments and of grade ggg 40or50, complete specification as per item no 2.23.1, supply, installing,testing and commissioning common control panel consisting of the following incoming no set of phase indicating lamps with sfu of suitable rating no, analog ammeter, no analog voltmeter 1ni with phase selector switch, complete specification as per item no 13.24.1, supply, installing,testing and commissioning common control panel consisting of the following incoming set of phase indicating lamps with sfu of suitable rating , analog ammeter, analog voltmeter 1ni with phase selector switch, complete specification as per item no 13.23, supply of isi mark 175mm nominal bore,plain and steel casing pipe grade of steel fe 410 of wall thickness conforming to is 4270 2001 and latest ammendments, complete specification as per item no 12.32, pvccouplers 200mm dia, pvccouplers 140mm dia, pvccouplers 110mm dia, pvccouplers 75mm dia, pvccouplers 63mm dia, handglovess, pvcreducer 110 mm dia, pvcreducer 90 mm dia, pvcreducer 75 mm dia, pvcreducer 63 mm dia, pvcreducer 50 mm dia, pvcservice saddles 90 mm dia, pvcservice saddles 75 mm dia, pvcservice saddles 63 mm dia, pvcbend 160 mm dia , pvcbend 110 mm dia , pvcbend 90 mm dia , pvcbend 50 mm dia , pvctee 160 mm dia , pvctee 110 mm dia, pvctee 90 mm dia, pvctee 75 mm dia, pvctee 63 mm dia, pvctee 50 mm dia, pvctee 40 mm dia, pvctee 25 mm dia, pvcelbows 200 mm dia, pvcelbows 50 mm dia, pvcelbows 40 mm dia, pvcelbows 32 mm dia, pvcelbows 25 mm dia, pvc flebyible hose pipe 1inch, upvc column pipe 1inch, hdpe pipe grade pe100-pn 10, 63mm , medium duty gi pipe of 25mm dia , medium duty gi pipe of 20mm dia , opvc reducer 200x160 , opvc reducer 160x110 , opvc reducer 110x90 , opvc sliding coupler 200mm pn16 , opvc sliding coupler 160mm pn16 , opvc sliding coupler 110mm pn16 , pvc pipes of 6 kg/cm2 for 90mm(1.313) , opvc sliding coupler 60mm pn16, supply and delivery at site 50mm(2inch) dia heavy duty unplasticized pvc column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof epdm ring with isi mark with its latest amendments, supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (c class) as per is 1239 (part-i) 1990 with latest amendments with isi mark (one end fitted with heavy duty collar and other end fitted with protective cover)50 mm , supply and laying of lg ut cable having aluminium conductor pvc insulated, sheathed, galvanized steel wire / steel tap armored cable with pvc over sheathing., pvc pipes of 6 kg

Central Government/Public Sector

CTN :41281575

29 Sep, 2025 NA

Sonpur - Bihar

Tender For corrigendum : supply of pressure reducing valve to escort drg./ pt. no. 6700 [ warranty period: 36 months a fter the date of delivery ]

Central Government/Public Sector

CTN :41698628

09 Oct, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of 3-way pressure reducing valve part no. make-plasser or its equivalent

Central Government/Public Sector

CTN :41692541

24 Sep, 2025 NA

Multi City - Multi State

Tender For regulation of control valves, periodical cleaning and maintenance of glr, oht, pvc tanks, septic tanks, under ground sewage systems & maintenance of water pipe lines at various stations and colonies in senior section engineer/works/tvr section for a period of two years.

Central Government/Public Sector

CTN :41597173

16 Sep, 2025 46.13 Lacs

Kamega - Arunachal Pradesh

Tender For repair/replacement of water filtration plant, control valves p s tank, staging, filter media and connected items at phase -ii (chindit top, tenga ledge, goc camp area) of e/m under ge tenga

Central Government/Public Sector

CTN :41597175

16 Sep, 2025 44.74 Lacs

Kamega - Arunachal Pradesh

Tender For repair/replacement of water filtration plant, control valves, ps tank and staging, filter media and connected items at ph-i (rupa, gachham, birpur, dp, bomdila) of e/m under ge tenga

Central Government/Public Sector

CTN :41597176

16 Sep, 2025 44.56 Lacs

Kamega - Arunachal Pradesh

Tender For repair/replacement of water filtration plant, control valves, ps tank and staging, filter media and connected items at ph- iii (u and l dahung, dum dum nalla, mh, mes offices and messes) of e/m under ge tenga

State Government

CTN :41365007

08 Sep, 2025 NA

Phaltan - Maharashtra

Tender For supply of installation, commissioning and testing of canning line 0.5 tph - supply of installation, commissioning & testing of canning line 0.5 tph., exhaust box it consists off ss 304-the tunnel type steam exhauster suitable for exhausting of cans-pursed inside the trough to heat the can up to required temperature ss 304 wire mesh type belt-conveyor belt width 500mm-conveyor frame is made in ss304 square pipe 40mm x 40mm-top and bottom cover is provided and length of exhauster 5500mm-one steam header with inlet and drain connection is provided-temperature indicators with control and temperature sensor is provided-variable frequency drive (vfd) is provided for control the speed of belt-geared motor is provided 2 hp-body in 2mm thickness-gear box and motor mounting plate 5mm-belt guides -30mm x 5mm, vertical tank retorts -vessel size -600mm diameter x 900mmh-door manually top opening-capacity 200 bottles-basket loading and unloading manually-size of bottle 46mmx46mmx210mm-automatic digital temperature controller system and pressure control-provide safety valve, air vent valve, pressure gauge and digital temperate gauge-connections water inlet, drain, round retort baskets-ms round crates-diameter -500mm x 400mm, tilting kettle steam jacketed kettle (tilting type)-500 lit equipment consists of:-ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-steam inlet, outlet with steam trap, safety valve, air vent& drain connections-water holding capacity 500 lits-steam requirement 100 kg per batch at 3 kg/cm2-manually tilting arrangement by hand wheel, media preparation kettle- 500 lit -ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-stirrer arrangement with ptfe scrapers, shaft & supporting tripod-fixed speed drive for stirrer shaft-steam inlet, outlet & drain connections-holding capacity 500 lits-electric power requirement = 02 hp for stirrer shaft-steam requirement 100 kg per batch at 3 kg/cm2-body in 5mm thickness, ss tables -ss 304 table top and size 2500mmx600mm x 800mm height-four legs are provided in square tubes and 30x30mm-can size cut out body in 1.5mm, ds 24 seamer -capacity 30-40 high speed cans per minute.-can still type seamer suitable for seaming cans between 100 - 700 dia range.-sturdily built & very robust construction.-complete body of graded cast iron.-seaming operation is fully automatic after the can is placed & pedal is pushed.-the can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-change parts comprising of seaming rollers, can slide can -guide and seaming chucks for to suit your 401 changeparts [ 850 gm]-electicals:2 hp 930 rpm motor, switchgear, starter, (suitable for operation of 400 v 5% 3 phase 50 cycles supply) pulley, v-belt, cables, conduits and fittings toolkit, gantry from retort to cooling tank - ms structure, hoist lifting crane -500kg double wire rope typecap- 500kgpower-1hp, hoist trolly -trolley cap-500kg-trolley with track for movement, hydraulic trolly-pallet material movement hydraulic trolley, steam line with all valves with aluminum cladding -steam pipeline 40mm and 25mm-valves, bend, flange etc-aluminum cladding, can sterilizer -the tunnel type steam sterilizer suitable for sterilizing of cans-all the bottom of trough one steam connection is provided the steam is directly-pursed inside the trough to heat the can up to required temperature-ss wire type belt is provided for carrying can and width-300 mm-conveyor frame is made in ss square pipe-top and bottom cover is provided and length- 10 feet-one steam header with inlet and drain connection is provided wire mesh opening 5 mm and diameter- 1.6mm, temperature indicates and temperature sensor is provided, geared motor-01 hp, hand can tester -can test