Latest pressure reduction skid Tenders | Government pressure reduction skid Tenders

CTN :40819210

30 Jun, 2025 8.06 Lacs

Silvassa - Dadra And Nagar Haveli

Tender For providing and supplying furniture for type - v / c bungalow at tokarkhada - providing and supply of emerald leather-pure leather center tilt mechanism, upright position lock. ai die cast pedestal (office chair), providing and supply aristo tbl 1200 x 600 (office chair), providing and supply gayle coffee table black (teapoy), providing and supply victoria coffee table walnut, providing and supply 205 wicker outdoor sofa set (model no.gc-205), providing and supply 203 wicker outdoor sofa set, providing and supplying wicker swing (zula), providing laying artificial lawm(6 mm), supplying and stacking of good earth at site including royalty and carriage upto 5 km lead (earth measured in stacks will be reduced by 20% for payment)., providing mirror polish to wooden furniture, providing and fixing 5mm mirror glass with polish, providing and fixing 5 mm bracket for glass fixing, replacing of dining chair leather with labour charges, excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead.(b) dence or hard soil, providing and laying cement concrete 1:3:6 ( 1-cement : 3- coarse sand : 6- hand broken stone aggregates 40 m nominal size) and curing complete excluding cost of framework in (a) foundation and plith, providing and laying controlled cement concrete m.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (a) foundation, footings, base of columns and mass concrete, brick work using common burnt clay building bricks having crushing strength not less than 35 kg./sq.cm. in foundation and plinth in cement mortar 1:6 (1- cement : 6 -fine sand)(b) conventional + extra for brick work in superstructure above plinth level upto floor two level (b) conventional, providing 15mm thick cement plaster in single coat on rough (similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) cement mortar 1:3 (1-cement:3-sand), steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (a)in beams and joists, channels angles tees, flats, with connecting plates or angle cleats as in main and cross beams. hip and jack rafters, purlins conneted to common rafters and the like, providing corrugated g.i. sheet of class-3 roofing fixed with glavanished iron j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washer or g.i. limpet washer. filled with white lead complete excluding the cost of purlins, rafters and trusses.(1) 0.80 mm thick sheet., providing and fixing to wall ceiling and floor 10.0 kg. f/cm2 working pressure poluthene pipes of the following outside dia. low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(g)110 mm, providing and supplying for washing machine as approved by and engineer in charge, providing and supplying for wooden box bed (king size) as approved by and engineer in charge, providing and supplying for mattras (ortho 6") as approved by and engineer in charge, providing and supplying for side table as approved by and engineer in charge, providing and supplying for pillow as approved by and engineer in charge

Central Government/Public Sector

CTN :40762589

25 Jun, 2025 NA

Lakshadweep - Lakshadweep

Tender For providing an alternate berthing arrangement (by using pontoon) to facilitate landing for tourists at aberdeen jetty near rajeev gandhi statue, rgws complex, sri vijaya puram, a and n islands. - shifting / towing of one number 100 ton cap. steel pontoon (size: 20mx9mx2m) from pbhc to aberdeen jetty (rgws) complex by suitable motor vessel and anchoring/positioning at the location as directed by the eic, including the cost of ropes and other required materials etc.., lashing charges,completing all port formalities,labour charges,transit insurance, all taxes and duties, gst, port dues, minor tools and plants, lwc etc. complete., fabrication of various component and fittings for pontoon jetty, the work including cutting and welding of steel strucutres for fabrications work by using various sizes of m.s rods, m.s.angles, m.s.channels, t-frame, seamless pipe schedule 80 pipes for bollards etc. as per the instructions of eic. removing all the dust and scales from the newly fabricated steel sections and applying one coat of synchromate primer of approved quality. the rate is including cost of different sizes of steel sections, welders/gas cutters, fitters, semi skilled labours, unskilled labours, painters, gas, carbide, welding rods (m/s. irs approved brand), minor tools and plants. hire charges of welding sets, gas plants, cost of primer paint and other consumables required, gst, lwc etc complete., collection of materials required such as c.c.anchor blocks / m.s anchors, chains etc. required in connection with pontoon jetty arrangement and other miscellanous works, loading, transporting, unloading and placing in suitable location as per the direction of eic, including cost of all labour charges for loading and unloading , hire charges of truck, gst, lwc etc. complete., supplying & fixing of chain pulley block 3 ton capacity at existing structure, suitable for lifting the aluminium gangway from the pontoon and lowering the gangway at the pontoon as and when required at aberdeen jetty, other miscellanoeus required, painting with aluminium paint as directed by eic. the rate is including the cost of all labour, materials such as aluminium paint, bolt and nut of various sizes, d shackle 32 mm pin size, wire grips 32 mm, g.i. chain 16 mm for gang way, m.s. hinges, chain pulley 3 ton capacity, pad lock & cardium compound ,gst and lwc etc complete., removing all the scale and rust, de-greasing the surface by pickling in dilute hydrochloric acid and thereafter attending painting to the 100 ton pontoon by applying one coat zinc phosphate primer and thereafter applying two coat high build black paint over the external area above water level area and finish black and deck green paint (marine quality) over the outer shells and deck plate,towing post, bollard etc. the rate is inclusive of all labour charges, paint, painting materials, scaffolding materials, chipping hammer, wire brush and other minor t&p, gst, lwc etc complete. (outer side surface only)., providing and fixing of accessories like old u/s truck tyre fenders all around the pontoon, hanging with g.i chain at suitable position as per the direction of eic. the rate is including cost of u/s truck tyres, transporting, cost of g.i. chain 16mm, d-shackle etc. or any other items required the the work, cost of all labour charges for making holes other minor t&p, gst and lwc etc. complete.

CTN :40728636

07 Jul, 2025 NA

Darjeeling - West Bengal

Tender For supply of ms shs fabricated steel structure 18 nos containers including staircase and water tank staging minimum weight , 0 point 50 mm trapezoidal ppgi az 150 550 mpa sheet having green camouflage pattern size 3500 mm x 1070 mm weight approx 16 point 70 kgs per sheet , 0 point 50 mm ridge cover of size 250 plus 250mm 500 mm 3000 mm length camouflage pattern , shelter flashing 0 point 50 mm properly rivetted in floor wall ceiling internal external corners including outside joint as per tech specs , 60 mm thick wall and partition panels fixed with the shelters , 60 mm thick false ceiling panels fixed with the shelters , 60 mm floor panels fixed with the shelter , 3 mm thick spc stone plastic composite waterproof flooring fixed on floor panel in all areas except toilet block , aluminium chequered sheet 1 point 5mm thickness fixed on floor panel only in toilet block areas except bathing and toilet area , doors 900 x 2135 mm internal panel made from 60 mm thick puf panels having aluminium lipping all around outer frame to be made with 2 mm thick ms painted profile , toilet doors 700 x 2000 mm internal panel made from 30 mm thick solid pvc panel outer frame to be made with 2 mm thick ms painted profile , aluminium 2 track sliding double glass unit insulated windows 1000 x 1000 mm , window canopy with ppgi sheet and angle iron frame , aluminium top hung ventilator of size 450 mm x 600 mm , aluminium canopy with ppgi sheet and angle iron frame , aluminium fixed verandah glazing with toughened glass 5 mm thick of size 1200 mm x 2400 mm , foundation bolt 40 x 450 mm , m 25 x 100 mm ht nut bolt , stsd screws for roofing rivets for flashing nut bolts for canopy , ms steel lockers of size 2100 mm height x 900 mm width x 475 mm depth double door duly painted in approved shade , office chairs rotating type with puf cushion and rubber hand rest , steel office table of size 1200 mm length x 760 mm width x 900 mm height with 3 drawers 1 cupboard and 18 mm thick prelaminated board as per tech specs , fire extinguisher a b and f type 2 kgs , water dispenser 15 ltr capacity , waste dustbin 10 ltr , 2 kva off grid solar plant with solar pv module 12 volt 335 watts along with all wires junction box connectors gi frame for fixing of panels , 2 kva pure sine wave solar invertor along with cables and fittings as required , solar battery 12 volts 200 ah gel based lithium based along with battery cabinet and cable as required , fd kero heater size 44 point 6 x 44 point 6 x 58 cm heating performance 6 point 3 kw fuel tank capacity 7 point 2 ltrs oil consumption min 0 point 24per max 0point 74 ltr per wt 12 kgs , drapery rods with brackets for curtain , all internal sanitary fitting hot cold water pipelines drainage up to the shelter will be fixed in supplier manufacturing unit external plumbing and sanitary items will be supplied with the shelter , vitreous wash down water closet pan with flushing system cistern combo with p or s trap and flushing pipe complete including all joints complete , stainless steel grade 304 shower floor pan of size 1150 x 1030 mm make jayna bluestar diamond oblique amc or equivalent , vitreous wash hand basin white 550 mm x 400 mm flat back including providing ci brackets cp pillar tap cp angle cock with all accessories as per brief tech specs , wash basin looking mirror 450 mm x 900 mm , ss soap dish , aluminium peg set of 6 , wash basin mixture cp for hot and cold , bib tap long body cp 15mm bore , bib tap short body cp 15mm bore , stop cock cp 15 mm bore , ss jali 4 inch , pvc flushing cistern 10 litres capacity with pvc connections 600 mm long and waste pipe , 20 mm ppr pipes pn 16 for hot and cold water supply in all bathing area and washbasin along with all connections like ppr tee elbow socket reducer etc complete in all respects , 20 mm ppr pipes pn 16 for cold water supply in toilet area and urinals along with all connections like ppr tee elbow socket reducer etc complete in all respects , 25 mm ppr pipes pn 16 for ho

CTN :40706492

24 Jun, 2025 13.23 Lacs

Honnali - Karnataka

Tender For construction of nrlm shed for livelihood activities of kulagatte village self-groups under narega scheme 2023-24 - hnlmr9919-g.i. overflow pipe 20mm dia, hnlmr9930-m.s. holder bat clamp 32mm, hnlmr9932-mosquito proof coupling 25mm, hnlmr9941-orissa pattern of size 580x440mm with integral type foot rests, hnlmr9942-p.v.c automatic flushing cistern 7.5 litres with fittings, hnlmr9944-p.v.c. flushing cistern 10 lts low level with fitting, hnlmr9950-special for overflow pipe, hnlmr9953-vitrified tiles 600x600 mm, hnlmr9955-white vitreous china clay flat back lipped front urinal basin of 430x260x350mm size, hnlmr9957-white vitreous china clay flat back wash basin size 630x450mm, hnlmr9968-pvc pipe of 4kgcum,63 mm, mason and semiskilled, hnlmr9773-add watering charges at 1 % on material, hnlmr9779-add white cement for pointing at 2% on material, hnlmr9780-add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material, hnlmr9782-add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, hnlmr9787-add over head charges 10%, hnlmr9817-ms flat, hnlmr9883-licenced plumber with tools, hnlmr9893-100mm s or p trap, hnlmr9906-c.i. / m.s. brackets for flushing cistern, hnlmr9911-copper plated brass piller tap 15mm, hnlmr9917-g.i. 32mm dia telescopic flush pipes with fittings specials, hnlmr9918-g.i. flush pipe of standard size and c.p brass spreaders, brass unions and clamps including fittings, hnlmr9612-ms tube, hnlmr9615-solvent cement adhesive, hnlmr9616-white cement, hnlmr9674-hom of machinaries for planing, hnlmr9675-hom of vibrator 0.71 days, hnlmr9676-hom of welding and grinding machine, hnlmr9677-mixer (concrete small used in culvert), hnlmr9688-unit cost as per the specification, hnlmr9724-mason class ii (with tools), hnlmr9725-mason class i (with tools), hnlmr9727-add 15% wastage for glass, hnlmr9735-add brush at 1% on cost of paint, hnlmr9737-add brush, putty, glue at 5% on cost of paint, hnlmr9742-add brush, putty, sand paper, roller at 5% on cost of paint, hnlmr9749-add cutting and other wastage 5%, hnlmr9752-add handling , loading and unloading at 1% on material, hnlmr9753-add handling , loading and unloading at 2% on material, hnlmr9754-add hom of welding and grinding machine2% on materia, hnlmr9755-add hom of welding and grinding machine 4% on material, hnlmr9757-over head & other miscellaneous charges, hnlmr9759-add providing and removing scaffolding at 3% on labour, hnlmr9762-add sundries charges at 1 % on material, hnlmr9764-add sundries charges at 2 % on material, hnlmr9769-add tools transportation and machinaries 1% on material, hnlmr9772-add watering charges at 1 % on labour, hnlmr9449-ceramic tiles of size 30 x 30 cms, hnlmr9451-chrominum plated screws, hnlmr9452-cleat angles, hnlmr9455-corbon electrodes, hnlmr9463-enamel metal paint, hnlmr9465-gi coated expansion bolts, hnlmr9484-honne wood, hnlmr9485-honnewood planks for panels 20 mm thick, hnlmr9487-jungle wood runners and planks, hnlmr9488-lead or pvc connection pipe 32mm dia (for wash basin), hnlmr9498-mathi/nandi wood planks for panels 25 mm thick, hnlmr9508-nylon rollers, hnlmr9522-ready mix primer paint (ready mix red lead paint), hnlmr9527-rubber beading for shutters beading, hnlmr9534-silver oak or equivalent planks 38 mm thick, hnlmr9541-stainless steel hollow pipe 25 mm dia, hnlmr9542-stainless steel hollow pipes 16 gauge 50 mm dia, hnlmr9554-tmt bars fe 500, hnlmr9560-weilding rods, hnlmr9562-whitening, hnlmr9597-fabricator, hnlmr9598-fitter class i, hnlmr9607-welder grade i, hnlmr9609-add, hnlmr9611-c.i. / m.s. brackets for flushing cistern, hnl7318-plasticizer / super plasticizer, hnl7335-binding wire, hnlmr10012-pvc beading, hnlmr10013-colour glazed tiles 30x60 cms 6mm thick, hnlmr10014-border tiles 30 x 10 cms, hnlmr10015-m.s rods, hnlmr10017-polyenthylene water storage tank of specified capacity l, hnlmr10021-labour charges for lifting and placing in position and making connection at 7% on material,

State Government

CTN :40700712

11 Jul, 2025 NA

Multi City - Punjab

Tender For procurement of g.i. pipes and fittings tender document annexure-a annexure-b

CTN :40491968

24 Jun, 2025 NA

Noida - Uttar Pradesh

Tender For corrigendum : supply of procurement of metering skid for mgl raigad as per material requisition and group no 1 of sor , inland transportation upto delivery location and other costs incidental to delivery of goods for item sl no 1 of sor and as per material requisition , supervision charges for installation and commissioning for metering skids for item sl no 1 of sor and as per material requisition , procurement of metering skid for igl kasna as per material requisition and group no 2 of sor , inland transportation upto delivery location and other costs incidental to delivery of goods for item sl no 2 of sor and as per material requisition , supervision charges for installation and commissioning for metering skids for item sl no 2 of sor and as per material requisition , procurement of pressure reduction skid for lmc to gipl as per material requisition and group no 3 of sor , inland transportation upto delivery location and other costs incidental to delivery of goods for item sl no 3 of sor and as per material requisition , supervision charges for installation and commissioning for pressure reduction skids for item sl no 3 of sor and as per material requisition

CTN :40642432

27 Jun, 2025 NA

Nainital - Uttarakhand

Tender For supply of steel tubes, tubulars and other steel fittings as per is 1239 (part 2 - steel pipe fittings) (q3) , steel pipes for water and sewage as per is 3589 (q3) , cpvc industrial pipe fittings, schedule 80 (q3) , brick (q3) , m - seal as per is 9197 (q3) , unplasticized pvc pipes for potable water supplies as per is 4985 (q3) , gun metal gate valves - bhel (q3) , chlorinated polyvinyl chloride (cpvc) pipes for potable hot and cold water distribution supplies (v2) as per is 15778 (q3) , commercial cpvc pipe fittings (q3) , gi tubing 50mm med grade , gi tubing 80mm med grade , gi tubing 40mm med gde , gi socket 80mm , gi socket 40mm , gi tank nipple 15 mm dia , gi tank nipple 20 mm dia , gi long screw nipple 15mm x 200mm long with two checknuts and washers , gi long screw nipple 20 mm x 200mm long with two checknuts and washers , gi nipple 15 mm x 50mm long , gi nipple 15 mm x 75mm long , gi nipple 20 mm x 50mm long , gi nipple 20 mm x 75mm long , m s butt hinges 100 mm , m s butt hinges 50mm , m s butt hinges 75 mm , plain glass sheet 3 mm thick size 4 feet x 3 feet , plain glass sheet 3 mm thick size 6 feet x 4 feet , glass pane 3 feet x 2 feet x 4mm , glass pane 4 mm 6 feet x 4 feet , glass pane 4 point 8 mm 6 feet x 4 feet , glass pane 4 mm frosted oblique tinted , alm door stopper floor 75mm , aluminium sheet 0 point 63mm thick in 4 feet width , cement opc 43 grade of 50 kg bag , coarse aggregate crushed stone 12 point 5mm graded , coarse sand , flashing tape multipurpose self adhessive bitumen sealing tape of size 10 mtr x 100 mm x 1 point 5mm thick , ms door spring rat rail type 200mm , door spring helical 150mm , helical door spring 300 mm , double action spring hinges mild steel with steel wire spring stove enamelled black 150mm , ms powder coated brackets with fancy knob for 20mm dia curtain rods , stainless steel knob for curtain rods 25mm dia , oil putty wood , plain wooden beading of size 20 mm x 20mm , wc indin type vitreous china white orrissa pattern size 580 x 440mm , cp jet spray with flexible pipe , towel rack cp , cp wall mixer with telephonic shower , bib tap brass 20 mm , brass internal fitting spindle long for 15mm dia concealed stop cock , gland packing rope 15 mm , cp brass toilet paper holder

Central Government / Public Sector

CTN :40441016

23 Jun, 2025 1.11 Crore

Haldia - West Bengal

Tender For corrigendum : custom bid for services - 9040c25b52 annual repair contract for process scheme jobs in instrumentation department on open tender basis- equipment hiring charges - 1 hydra 10t (hired) 4640, 2 hydra 15t (iocl owned) 4944, 3 hydra 25t (hired) 5551, 4 crane 50t (hired) 10785, 5 crane 75t (hired) 10785, 6 forklift ( iocl owned) 1738, 7 180t crane (hired) 18296, 8 articulated boom (hired) 2208, 9 tractor and trailer (hired) 2076, supply of materials for secured advance- civil items: a. items against which secured advance can be granted :, 1. bricks, 2. stone and brick aggregates, 3. stones, 4. finished products of brass, iron or steel such as doors and window frames,, wiremesh, gate, gi sheets., 5. pre-cast rcc products such as pipes & fittings, jail, water storage tanks., 6. doors and windows fittings., 7. pipes and sanitary fittings of gi, ci, sci and hci., 8. metallic doors / windows., 9. ms gratings., 10. reinforcement bars., 11. hydraulic door closers., 12. structural steel., 13. flushing cisterns., 14. ci valves, sluice gates etc., 15. fencing materials chain-link / barbed-wire etc., 16. anchor bolts., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. kitchen sink china vitreous, flush back for wash basin vitreous china water closet, and pedestal type water closet vitreous china, urinals., 2. glazed tiles, terrazo tiles and similar articles., 3. marble slabs., 4. asbestos cement products., 5. finished timber products such as doors, windows, flush doors, particle boards, (subject to the mandatory tests being satisfactory)., 6. bitumen in sealed drums., 7. bitumen felt., 8. polythene pipes & fittings, sanitary fittings and pipes of sw, porcelain and, chinaware materials., 9. laminated / safety one way vision and bullet proof glasses., 10. chemicals required for anti-termite treatment (in sealed drums)., 11. paints, varnishes, distempers, pigment, spirit., 12. cement tiles., 13. acid proof tiles., 14. bitumen products required for mastic flooring etc., 15. water proofing compound such as cico etc., 16. materials for epoxy finishing etc., electrical items, a. items against which secured advance can be granted :, 1. steel conduit, 2. gi pipes, 3. ci boxes, 4. ic boards., 5. switchgears (air circuit breakers and air break switches), 6. a c s r conductors, 7. a.c. plant & machinery., 8. pumps, 9. generating sets (without oil), 10. gi strips., 11. street light poles (steel), 12. cable trays., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. transformers, 2. switch gears ( oil filled), 3. lt & ht cables, 4. fans, 5. store & dry batteries, 6. insulation tapes., 7. epoxy cable compounds., 8. electric light fittings., 9. wood battens, casing & capping and wooden boards., 10. flexible wires., 11. pvc materials, 12. rubber materials, 13. glass wools, thermocol and other insulating materials., 14. porcelain ht and lt insulators., 15. electric heat tracing tapes., mechanical items, a. items against which secured advance can be granted :, 1. structural steel., 2. plates., 3. pumps / motors, vessels etc., diesel engine, side entry mixers, suction heaters &, any other mechanical equipment., 4. refractory bricks., 5. ss foil., 6. pipes / pipe fittings., 7. gratings., 8. valves, hydrants, monitors., 9. aluminium sheet., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. bitumen, 2. wrapping & coating material, 3. primer / paint, 4. foam / foam seal material, 5. guniting material, 6. insulation & refractory materials other than bricks., instrumentation items, a. items against which secured advance can be granted :, 1. structural steel, 2. ms sheet / gi sheet, 3. pre-fabricated trays, 4. pipes / tubes / fittings, b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. ss

CTN :40603573

25 Jun, 2025 NA

Ranga Reddy-T - Telangana

Tender For supply of wire mesh stainless steel grade - m - seal as per is 9197 (q3) , hydraulically regulated door closers (q3) , sinks / wash basins - vitreous china as per is 2556 (part 4) (q3) , european pattern toilet seat vitreous china (q3) , urinal bowls as per is 2556 (part 6) (q3) , wire nails (q4) , wood screws (q3) , door handles as per is 208 (q4) , taps or valves of nonferrous metals (q3) , connection pipe with nuts (v2) (q3) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , stainless steel butt hinges as per is 12817 (q3) , taflon tape as per is 14635 (q3) , chlorinated polyvinyl chloride (cpvc) pipes for potable hot and cold water distribution supplies (v2) as per is 15778 (q3) , commercial cpvc pipe fittings (q3) , towel rail / ring / rack / hooks for bathroom (q3) , floor drain traps (q3) , pvc waste pipe 32 x 800 mm , urinal waste pipe 32mmx750mm , gi reducing tee 80mmx50mm , ms helical spring door closer , waste coupling 40 mm , sink waste coupling 100mm , ptmt float valve size 20 mm , ptmt alloy cabinet mirror , wire mesh stainless steel grade 304 , looking marrior for mes drawing , aluminium plain sheets for specified size , plastic seat cover for anglo-indian type

Central Government/Public Sector

CTN :40577975

23 Jun, 2025 25.00 Lacs

Shillong - Meghalaya

Tender For repair and replacement to certain sanitary fittings, ci/ gi pipe, water tank, rainwater pipes, pvc tanks and other miscellaneous works at af station laitkor peak under ge (i) (af) shillong

Pressure Reduction Skid Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government / Public Sector

Central Government/Public Sector