Latest pressure seal Tenders | Government pressure seal Tenders

State Government

CTN :45721040

20 Jul, 2026 1.65 Crore

Mandawar - Rajasthan

Tender For - rj-19-07/ml/ jhalrapatan/ 2026-27 - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, construction of missing link road from village nipaniya to kherana, total, construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305.3, construction of missing link road from village nipaniya to kherana, total, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, construction of missing link road from village nipaniya to kherana, total, granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means with a lead of 1 km. for grading-iii material, construction of missing link road from village nipaniya to kherana, total, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406 by mechanical means with a lead of 1 km., construction of missing link road from village nipaniya to kherana, total, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) using truck mounted sprayer including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, construction of missing link road from village nipaniya to kherana, total, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., construction of missing link road from village nipaniya to kherana, total, 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type

State Government

CTN :45721042

20 Jul, 2026 1.50 Crore

Mandawar - Rajasthan

Tender For - rj-19-08/ml/ jhalrapatan/ 2026-27 - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, construction of missing link road from village dola to padiyarkhedi, total, construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305.3, construction of missing link road from village dola to padiyarkhedi, total, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, construction of missing link road from village dola to padiyarkhedi, total, granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means with a lead of 1 km. for grading-iii material, construction of missing link road from village dola to padiyarkhedi, total, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406 by mechanical means with a lead of 1 km., construction of missing link road from village dola to padiyarkhedi, total, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) using truck mounted sprayer including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, construction of missing link road from village dola to padiyarkhedi, total, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., construction of missing link road from village dola to padiyarkhedi, total, 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of eith

State Government

CTN :45721047

20 Jul, 2026 1.03 Crore

Mandawar - Rajasthan

Tender For - rj-19-10/ml/ jhalrapatan/ 2026-27 - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, construction of missing link road from village mathaniya to ruaprel, total, construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305.3, construction of missing link road from village mathaniya to ruaprel, total, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, construction of missing link road from village mathaniya to ruaprel, total, granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means with a lead of 1 km. for grading-iii material, construction of missing link road from village mathaniya to ruaprel, total, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406 by mechanical means with a lead of 1 km., construction of missing link road from village mathaniya to ruaprel, total, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) using truck mounted sprayer including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, construction of missing link road from village mathaniya to ruaprel, total, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., construction of missing link road from village mathaniya to ruaprel, total, 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of eith

State Government

CTN :45708306

02 Jul, 2026 NA

Chandrapur - Maharashtra

Tender For procurement of spares for hp bypass main valve & spray valve along with their actuator's spares for aoh of unit-8, cstps, chandrapur. - hpbp valve ars 140 valve stem, hp bypass ars grap pac rin d85xd60x12.5, hp bypass ars 140 sw gaskt d313xd293x4.5, ars 140 s w gasket od149xid124.5xt4.5, hp bypass ars 140 pressure seal plug, hp bypass 140 sw gasket od183xid162xt4.5, tbnsteam 500mw hpbp vlv ars140 jet cage, hpbp valve ars 140 valve seat, hpbp spray vlv e45s valve stem 10 sqcm, hpbp spray vlv e45s valve stem 6.3 sqcm, e 45 s gra.pack.ring d112xd88x12, e 45 s grap.pack.ring d38xd22x8, hpbp spray vlv e45s valve seat 6.3 sqcm, hpbp spray vlv e45s valve seat 10 sqcm, act hyd slz asm250-10 pstn seal pn 6078 etc..

Central Government/Public Sector

CTN :45712862

18 Jul, 2026 NA

Katipala - Karnataka

Tender For tender for supply of transmitters - dpt , standard , hart , range -10000 mmwc to 10000 mmwc , diaphragm gold plated on ss316l , as per data sheet mrpl inst dpt 003. , dpt , standard , hart , range -1000 mmwc to 1000 mmwc , diaphragm gold plated on ss316l , as per data sheet mrpl inst dpt 004. , high pressure dp trans , ty hart , gold plated diaphragm , rang 0 to -10000mmwc , as per specification sheet mrpl dpt 006 , ff diffrential pressure transmitter range -10000 to 10000 mmwc , as per spec sheet mrpl inst dpt 012 , ff diffrential pressure transmitter range -1000 to 1000 mmwc , as per spec sheet mrpl inst dpt 013 , dpt , standered , ff , range -50000 mmwc to 50000 mmwc , diaphragm gold plated on ss316l , as per data sheet mrpl inst dpt 014. , diff. pressure transmitter , type-remote seal , range 0-10000mmwc , flange rating 3 inch 600 , as per spec sheet mrpl rsdp 001 , diff. pressure transmitter , type-remote seal , range 0-10000mmwc , flange rating 3 inch 150 , mrpl rsdp 002 , dpt , remote seal , hart , range 0-50000 mmwc , diaphragm ss316l , flange rating 3 inch 300 , as per data sheet mrpl inst rsdp 004. , dpt , remote seal , hart , range 0-10000 mmwc , diaphragm ss316l , flange rating 3 inch 300 , as per data -r sheet mrpl inst rsdp 003. , dpt , flush mounted diaphragm , hart , range 0-1000 mmwc , diaphragm ss316l , flange rating 3 inch 150 , as per data sheet mrpl inst rsdp 014. , dpt , flush mounted diaphragm , hart , range 0-25000 mmwc , diaphragm ss316l , flange rating 3 inch 150 , as per data sheet mrpl inst rsdp 015. , hart pressure transmitter , range 0-35kg cm2 , as per specification sheet mrpl pt 001 , high pressure trans , ty hart , gold plated diaphragm , rang 0 to 320 kg cm2 , as per specification sheet mrpl pt 006 , hart pressure transmitter , range 0-320 kg cm2 , as per specification sheet mrpl pt 005. , pressure transmitter , range 0-35 kg cm2 , direct mounted 1.5 inch 300 as per spec mprl inst rspt 009 , dpt , standard , hart , range -10000 mmwc to 10000 mmwc , diaphragm hastelloy c-276 , as per data sheet mrpl inst dpt 005. , pt , remote seal , hart , range 0-35 kg cm2 , diaphragm ss316l , flange rating 2 inch 300 , as per data sheet mrpl inst rspt 001. , pt , remote seal , hart , range 0-140 kg cm2 , diaphragm ss316l , flange rating 2 inch 600 , as per data sheet mrpl inst rspt 002. , pt , remote seal , hart , range 0-35 kg cm2 , diaphragm ss316l , flange rating 2 inch 150 , as per data sheet mrpl inst rspt 003. , pt , remote seal , hart , range 0-140 kg cm2 , diaphragm ss316l , flange rating 2 inch 300 , as per data sheet mrpl inst rspt 004. , pt , remote seal , ff , range 0- 35 kg cm2 , diaphragm ss316l , as per data sheet mrpl inst rspt 006. , wireless temperature transmitter as per spec mrpl inst wtt 001 , wireless dpt , flush mounted diaphragm , hart , range 0-25000 mmwc , diaphragm ss316l , flange rating 3 inch 150 , as per data sheet mrpl inst wrs 001. , wireless dp transmitter , dp range -10160 mmwc , as per spec. , wireless pressure transmitter , range 0-40 kg cm2 g , as per spec. , wireless gateway for communication with dcs pc , as per spec. , wireless hart adapter , ff , dpt , flush mounted diaphragm , range 0-25000 mmwc , diaphragm ss316l , flange rating 3 inch 150 , as per data sheet mrpl inst rsdp 017. , hart dp transmitter , range -10000mmwc to 10000 mmwc as per specification sheet mrpl dpt 001. , hart dp transmitter , range -1000mmwc to 1000 mmwc as per specification sheet mrpl dpt 002. , dpt , high static pressure , hart , range -10000 mmwc to 10000 mmwc , diaphragm ss316l , as per data sheet mrpl inst dpt 007. , dpt , high static pressure , hart , range -50000 mmwc to 50000 mmwc , diaphragm ss316l , as per data sheet mrpl inst dpt 009. , dpt , standard , hart , range -100 mmwc to 100 mmwc , diaphragm ss316l , as per data sheet mrpl inst dpt 010 , dp transmitter , as per spec , mrpl inst dpt 015 , dpt , remote seal , hart , range 0-50000 mmwc , diaphragm ss316l , flange rating 1.5 inch

CTN :45722183

13 Jul, 2026 NA

Mumbai - Maharashtra

Tender For tender for supply of il spare at bpcl mumbai refinery - packing il pggdva116 , gasket il gtstv4304016 , pressure seal vsn6 300 , plug stem il vst past04025stsheq fa1d16 , seat ring il vst srst04025stsh 16 , diaphragm il va1d dma1dr000 , plug stem vst past04017stsheq fa1r16 il , seat ring il vst srst04017stsh 16 , act seal kit il va1r skva1r000 , plug stem vhd il pady0802174phml pa2d16 , cage il vhd cedy0802174phml 16 , seat ring il vhd srdy0802174ph 16 , sleeve il vhd svdy0802174ph 16 , backup ring il vhd brdy0802174ph 16 , pressure seal il vhd psdy080 16 , gasket v595 il vhd gtdyv95080 16

CTN :45678648

08 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of flexiflo spares c c - 31.90.91.552.5 drive pulley assy flexiflo bmj872a a42 , 31.90.91.553.5 shaft key flexiflo a13434y 28 ks , 31.90.91.554.5 anti static belt flexiflo a17450b 221 , 31.90.91.555.5 wear ring case flexiflo a20778a 6 sg , 31.90.91.556.5 wear ring impeller flexiflo a20778b 6 sg , 31.90.91.560.5 vacuum pump asy flexiflo 4nn bmn490a a00 , 31.90.91.561.5 suction gasket flexiflo a16387e 197 ga , 31.90.91.562.5 volute gasket flexiflo a659ad 197 ga , 31.90.91.563.5 impeller 4nntl flexiflo b4436 3 sz r , 31.90.91.564.5 impeller washer flexiflo a20269 13 st , 31.90.91.565.5 implr lock screw flexiflo a14366 12 sd , 31.90.91.566.5 impeller key flexiflo a16307d 28 ks , 31.90.91.568.5 mech seal assy flexiflo a17064x 40 , 31.90.91.569.5 lip seal tri seal flexiflo a21832y 18 , 31.90.91.570.5 v ring flexiflo a20634h 16 , 31.90.91.571.5 shaft f85 flexiflo b24463 14 sp , 31.90.91.572.5 lip seal cr 19969 flexiflo a14891e 18 , 31.90.91.573.5 lip seal 22537544eb flexiflo a14898x 18 , 31.90.91.575.5 float linkage flexiflo 4nnbmk830a a14 ki , 31.90.91.576.5 rp separator hsg flexiflo bmk083a a18 , 31.90.91.577.5 vaccum ball valve flexiflo a16089n 330 , 31.90.91.578.5 vaccum hose 24in flexiflo a160290 421 , 31.90.91.579.5 run dry oil hose flexiflo a15217b 421 eb

State Government

CTN :45147651

06 Jul, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of sector plate hot end (primary to secondary) for αρη τυρε 27.5 vimt 2000 sector plate hot end (gas to primary) for aph type 27.5 vimt 2000 sector plate hot end (gas to secondary) for aph type 27.5 vimt 2000 sector plate cold end (primary to secondary) for αρη τυρε 27.5 vimt 2000 sector plate cold end (gas to secondary) for aph type 27.5 vimt 2000 sector plate cold end (gas to primary) for aph type 27.5 vimt 2000 static seal assembly (hot end + cold end) for aph type 27.5 vimt 2000 radial seals (hot & cold ends) for air preheater 27.5 vimt 2000 by-pass seals for air preheater 27.5 vimt 2000 steam soot blower nozzle for apη τυρε 27.5vmit 2000 , over running clutch assembly for guide trunnion with bolts air preheater 27.5 vimt 2000/over running clutch fso-400 for aph type: 27.5 vmit 2000 fixing pin as per drg. no. 4-55-335-00983 p.a fan ap2-17/12 for unit no 3 & 4 of sikka tps rectangular ring as per drg no. 0-55-334-00661 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps cylindrical helical spring as per drg no. 4-55-214-00246 for p a fan ap2-17/12 for unit no 3 & 4 of sikka tps cheese head bolt m 16x50 as per drg no. 0-55-334-00661 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps nut as per drg. no. 4-55-335-00993 for pa fan ap2-17 /12 for unit no 3 & 4 of sikka tps bearing cover assy as per drg no. 0-55-335-00619 for pa fan ap2-17/12 for unit 3&4 of sikka tps distance ring as per drg no. 4-55-335-00859 for pa fan ap2-17/12 for unit no 3 & 4 of sikka tps sealing ring as per drg. no. 3-55-335-00651/01 for pa fan ap2 17/12 expansion delivery side drg no. 3-55-334-00673 for pa fan ap2-17/12 for unit 3&4 of sikka tps split thrust coller as per drg no. 2-56-134-01102 for id fan ndzv 33 sidor for unit no 3 & 4 of sikka tps end closure kit as per drg no:3-56-135-00911 for for id fans ndzv 33 sidor for unit no 3 & 4 of sikka tps. circlip sb 26, blade bearing assembly of forced draft fan tyρε αρ1 18/11 , hfo oil gun nozzle spray plate 90-j16 i,rsb traviirsii csain assiimbly radial brg 200fxm85 skf-61840 of hydraulic turning motor, item no. 6, drg-11150146000/6 for 250 mw of sikka tps unit no. 3&4. sleeve of hydraulic turning motor, item no. 9, drg νο. 11150146000/9 for 250 mw of sikka tps unit no. 3&4. shaft b48x44 of hydraulic turning motor, item no. 3, drg no. 11150146000/3 for 250 mw of sikka tps unit no. 3&4. shaft nut of hydraulic turning motor, item no. 11, drg no. 11150146000/11 for 250 mw of sikka tps unit no. 3&4. lock washer dia 55 skf-mb1155 of hydraulic turning motor, item no. 12, drg no. 11150146000/12 for 250 mw of sikka tps unit no. 3&4. ring of hydraulic turning motor, item no. 10, drg no. 11150146000/10 for 250 mw of sikka tps unit no. 3&4. scru cap soc a12.9 m10x75 of hydraulic turning motor, item no. 19, drg no. 11150146000/19 for 250 mw of sikka tps unit no. 384. scru cap p-8.8 m12x90 of hydraulic turning motor, item no. 20, drg no. 11150146000/20 for 250 mw of sikka tps unit no. 3&4. throttle valve of hydraulic turning motor, item no. 22, drg no. 01165524000/22 for 250 mw of sikka tps unit no. 3&4. scru cap p-8.8 m20x60 of journal bearing no. 2, item no. 16, drg no. 01170318000/16 for 250 mw of sikka tps unit no. 3&4.

Central Government/Public Sector

CTN :45543733

29 Jun, 2026 NA

Katipala - Karnataka

Tender For corrigendum : supply of spares for bhel make steam turbines & compressors - gt38006-stop valve, tar ptfe abstriefe pos47-hy101941020030502076 6738006-stop valve, turcon step seal pos 52-hy101941020030502081 gt38006-stop valve, toroidal slg rings oil resisto pos 53-hy101941020030502082 gt38006-stop valve, toroidal slg rings oil resists pos 54-hy101941020030502083 6t38306-stop valve, toroidal slg rings oil resisto pos 59-hy101941020030500089 6738006-valve spindle disc spring assly po 521, valve spindle hy101941020030541056 gt38006- valve spindle disc spring assly po 521, ring pos 21/2 hy101941020030541058 6738006-valve spindle packing pos 29, sealing ring closed hy101941020030541076 gt38006- valve spindle packing pos 29, sealing ring open pos 29/7 hy101941020030541081 6738006- extraction gov valve assy s pares, sealing ring open hy101941020030527030 gt38006- extraction 1& gov valve assy 5 pares, bush pos 14/5 hy101941020030527092 gt38006-hp pilot valve spares toroidal slug rings pos 26 hy101941020030603045 6738006-hp pilot valve spares toroidal slg rings pos 35 hy101941020030603059 gt38006-hp pilot valve spares, turcon step seal pos 39-hy101941000030603064 gt38006 ring trol selg static 10130 thk 5 101941020030609031, spr. cat. drg.no. c03060700004, pes no 1 gt38006 ring trol selg static 1026 thk 3101941020030609044, spr. cat. dry. no, c03060700004, fo no 26 gt38006 turcon step seal 10 mm 101941020030609063, spr. cat. drg no, c03060700004, pas no 39 gt38006/7 sealing ring closed 25/38x6.5,pos. no- 14/4, part no 101941020030542029 gt38006/7 sealing ring open 25/38x6.5 p05. no-14/3, part no 101941020030542028 gt38006/7 pacing ring a24x29,pos. no-24, part no 101941000030502039 6138006/7 threaded bush, pos no 21, part no-101941020030527048 gt38006/7 washer sealing 1702281.5,pos no-42, part no 101941020030527103 gt38006/7 packing 40x248x4.8 pos no-28, part no 101941000030502044 6138006/7 packing pos no-29 part no-101941020030502045 gt38006/7 solid taper pin dia 8xl-28, pos. no-57, part no 101941020030527118 gt38006/7 fork m3sx 1.5 pos. no 30, part no-101941020030541085 gt38006/7 pin 16f7x152, pos. no-27, part no-101941020030603047 gat38825-yoke assembly, taper pin pos 16/17-16/21-hy101880570030541047 gat38025-yoke assembly, valve spindle pos 15 hy101980570030541057 gat38025-stop valve s bush pos 7 hy101980570030552014 gat38025-stop valve s, ring trol selg static pos 19-hy101980570030552034

corporations/Associations/Others

CTN :45666731

08 Jul, 2026 21.71 Lacs

Anpara - Uttar Pradesh

Tender For tender for supply of he rotor post seal (3021-01) for primary aph 26-vix-1625 , he radial seal inner (3021-02) sty-1 for primary aph 26-vix-1625 , he radial seal inner (3021-02) sty-2 for primary aph 26-vix-1625 , he radial seal interm (3021-03) for primary aph 26-vix-1625 , he radial seal out (3021-04) sty-1 for primary aph , model-type-26-vix-1625 , he radial seal out (3021-04) sty-2 for primary aph , model-type-26-vix-1625 , he radial holding strip inner (3021-05) for primary aph 26-vix-1625 , he radial holding strip interm(3021-06)for primaryaph 26-vix-1625 , he radial holding strip outer(3021-07) for primary aph 26-vix-1625 , he outer sealing tab (3021-8) for primary aph 26-vix-1625 , he outer seal tab(3021-09) sty-1for primary aph , model-type-26-vix-1625 , he outer seal tab(3021-09) sty-2 for primary aph , model-type-26-vix-1625 , he bypass seal (3021-10) for primary aph 26-vix-1625 , he bypass holding strip (3021-11) for primary aph 26-vix-1625 , he axial seal 3021-12 style-1 for primary aph 26-vix-1625 , he axial seal 3021-12 style-2 for primary aph 26-vix-1625 , he axial holding strip 3021-13 for primary aph 26-vix-1625 , hot end (he) static seal plate for paph , material-carbon steel , ce radial post seal 3021-19 for primary aph , ce radial seal inner (3021-20) sty-1 for primary aph 26-vix-1625 , ce radial seal inner (3021-20) sty-2 for primary aph 26-vix-1625 , ce radial seal interm 3021-21 for primary aph 26-vix-1625 , ce radial seal outer 3021-22 sty-1 for primary aph 26-vix-1625 , ce radial seal outer 3021-22 sty-2 for primary aph 26-vix-1625 , ce radial holding strip inner 3021-23 for primary aph 26-vix-1625 , ce radial holding strip interm 3021-24 for primary aph 26-vix-1625 , ce radial holding strip outer 3021-25 for primary aph 26-vix-1625 , ce outer seal tab 3021-26 for primary aph 26-vix-1625 , ce outer seal tab 3021-27 for primary aph 26-vix-1625 , ce bypass seal 3021-28 for primary aph 26-vix-1625 , ce bypass holding strip 3021-29 for primary aph 26-vix-1625 , ce axial seal (3021-30) sty-1 for primary aph 26-vix-1625 , ce axial seal (3021-30) sty-2 for primary aph 26-vix-1625 , ce axial holding strip 3021-31 for primary aph 26-vix-1625 , cold end (ce) static seal plate for paph , model- 26-vix-1625 , material-carbon steel , machined t -bar , seals for primary aph , model- type-26-vix-1625 , rotor angle 30 deg for primary aph 26-vix-1625 , bypass angle 26-vix-1625 60 deg , carbon ring with spring for primary aph 26-vix-1625 , he rotor post seal 3022-01 for secondary aph 30-vix-2300 , he radial seal inner 3022-02 style-1 for secondary aph 30-vix-2300 , he radial seal inner 3022-02 style-2 for secondary aph 30-vix-2300 , he radial seal interm 3022-03 for secondary aph 30-vix-2300 , he radial seal out 3022-04 sty-1 for secondary aph 30-vix-2300 , he radial seal out 3022-04 sty-2 for secondary aph 30-vix-2300 , he radial holding strip interm3022-05 for secondaryaph 30-vix-2300 , he radial holding strip interm 3022-06 for secondary aph 30-vix-2300 , he radial holding strip outer 3022-07 for secondary aph 30-vix-2300 , he outer seal tab 3022-08 for secondary aph 30-vix-2300 , he outer seal tab 3022-09 style-1 for secondary aph 30-vix-2300 , he outer seal tab 3022-09 style-2 for secondary aph 30-vix-2300 , he bypass seal 3022-10 for secondary aph 30-vix-2300 , he bypass holding strip for secondary aph 30-vix-2300 , he axial seal 3022-12 style-1 for secondary aph 30-vix-2300 , he axial seal 3022-12 style-2 for secondary aph 30-vix-2300 , he axial holding strip 3022-13 for secondary aph 30-vix-2300 , hot end (he) static seal plate for saph , model- 30-vix-2300 , material-carbon steel , ce rotor post seal (3022-19) for secondary aph 30-vix-2300 , ce radial seal style-i for secondary aph 30-vix-2300 , ce radial seal style-ii for secondary aph 30-vix-2300 , ce radial seal interm 3022-21 for secondary aph 30-vix-2300 , ce radial seal outer 3022-22 style-1 for secondary aph 30-vix-2300 , ce radial seal outer 3022-22 st

Pressure Seal Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors