Latest primary injection kit Tenders | Government primary injection kit Tenders

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

CTN :45738533

10 Jul, 2026 NA

Ernakulam - Kerala

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; ultrasonic bath cleaner, pneumatic tester and calibrator; service provider

CTN :40704411

03 Jul, 2026 NA

Pathankot - Punjab

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - govt space; calibration of cm 20 particle count tester; service provider

Central Government/Public Sector

CTN :45710132

09 Jul, 2026 NA

Yamunanagar - Haryana

Tender For supply of 1) masks 10 packets. 2) lab coats 10 no. 3) rockwell r indenter for hr scale compatible with rockwell hardness tester 01 no.each, 4) burette 50ml, 5) bunsen burner, 6) potassium chloride, 7) nacl 1kg, 8) naoh pallets 1kg, 9) toluene 2.5 lit, 10) phenolphthalein indicator 01 bottle, 11) methyl orange indicator 01 bottle, 12) methly red indicator 01 bottle, 13) ethanol 99.9% annual repair grade 10lt., 14) digital precision thermometer least count 0.01 c, range -10 c to 350 c 1 no., 15) beakers 1000ml, 2000ml, 3000ml 02no. each, 16) 20) hydroquinone 50gm, 21) ethylene glycol 02 bottle(500 ml), 22) sodium citrate crystal 500gm, 23) citric acid 500gm, 24) bromocresol green 50gm, 25) metanil yellow 25gm, 26) glass pykanometer 50ml and 100ml 01 each beakers 25ml, 50ml, 100ml, 500ml 10nos. each 17) pt wire glass tube 04nos. 18) borosilicate-tube for drop point test apparatus 02nos., 19) p-dimethylamine benzaldehyde 01pack(100gm) 20) hydroquinone 50gm, 21) ethylene glycol 02 bottle(500 ml), 22) sodium citrate crystal 500gm, 23) citric acid 500gm, 24) bromocresol green 50gm, 25) metanil yellow 25gm, 26) glass pykanometer 50ml and 100ml 01 each [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45725163

14 Jul, 2026 15.49 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of silica gel breather metallic body , epoxy resin cast insulator , electrolyte copper transformer stud with brass chuck nut and nut with washer , insulator point 4kv , flexible link for service transformer , led tube light with batton 1x20w , tb 100a for ldb , 200w led flood light complete fitting led driver based , 110 w led flood light , 70w led flood light complete fitting led driver based , 40w led high bay complete fitting , mcb 20a sp , 15 amp socket , 15 amp switch piano type , 5a socket , 5a switch , mcb 63a 4p , digital multi meter digit display , hrc fuse 2 amp ns type , hrc fuse 4amp ns type , hrc fuse 6amp ns type , hrc fuse 10amp ns type , hrc fuse 16amp ns type , hrc fuse 63amp ns type , portable digital megger test voltage , supply changeover switch 415v , contactor coil 220v dc , aux contactor mm00 coil 240v ac 10a 415v , 415kv ac terminals cs735 , main switch 3 pole 63a 415v , tong tester including ac dc current , led display type tong tester , clamp for primary injection kit material , ac volt meter for station transformer 30 mva , 3 tf 4772- 0af0 power contactor 70 amp , aluminium platform step ladder of total extended height of 8 feet , 2 legged ladder 6 point 3m , 4 legged ladder 4 m , vernier caliper 150mm , standard tool box with case and total included minimum 132piece , bosch model gsb 600 corded electric impact drill , bosch model no gws 6 , bosch gbl 650 professional blower , bench vice for mech , bosch 200 mm file set , dowell make copper lug following size ring type , ferrule sleeve , black ink ribbon compatible for ferrule printing machine max letawin , aa rechargeable battery and charger , u clip gems clip 01 set include following , push button station with 2no control blocks , current transducer secure single function ac current transducer , voltage transducer , active power transducer

Central Government/Public Sector

CTN :45448629

03 Jul, 2026 NA

Jagatsinghapur - Odisha

Tender For corrigendum : supply of supply- instruments -battery discharge kit , supply- instruments - primary injection kit

CTN :45690830

02 Jul, 2026 23.34 Lacs

Ravangla - Sikkim

Tender For procurement of electrical materials and supplying & fixing the sam including repair etc. as required for the f.y. 2026-2027. (sh: maintenance of electrical installation of 6 vikas sff, ravangla, sikkim).subwork/packages:moei of 6 vikas sff, ravangla, sikkim. - single core frls pvc insulated conductor cable, , pvc conduit & accessories, , led batten type fittings, led tube, led, , bulb, led street light, led flood light etc., , mcb, mccb, isolator, db, enlosure,, , changeover switch, gi box, accl, , modular switch, socket, , angle / batten, pendant holder, , casing/capping, , electrical tape, , pvc gang box, , water heater, , pvc/xlpe cables armored, , unarmored 1100 volt grade, , bldc fan, , digital multimeter, , pvc gangbox, square box, , sprit level, , phase tester, , cutting pliers, screw driver sets, screw, , driver tool kit, , cutting blades, , extension board, , drill machines, , rotary hammer, , ups inverter, , battery charger, , solar road studs

CTN :45654177

23 Jul, 2026 20.00 Lacs

Shahdol - Madhya Pradesh

Tender For supply of electric material -main switch 16 ampere, main switch 63 ampere, main switch 100 ampere, mcb 16 ampere, copper wire 1.5 mm, copper wire 2.5 mm, copper wire 6 mm 3-core, copper wire 10 mm 3-core, copper wire 16 mm 3-core, copper wire 25 mm 3-core, armoured cable 35 mm 3-core, armoured cable 50 mm 3-core, armoured cable 70 mm 3-core, aluminium wire 1.5 mm, aluminium wire 2.5 mm, aluminium cable 10 mm, aluminium cable 16 mm, aluminium cable 25 mm, aluminium cable 50 mm, submersible wire 3-core 2.5 mm, submersible wire 3-core 4 mm, submersible wire 3-core 6 mm, submersible wire 3-core 10 mm, submersible wire 3-core 25 mm, armoured cable 95 mm 4-core, armoured cable 110 mm 4-core, lugs 16 ampere, lugs 32 ampere, lugs 65 ampere, floodlight bulb 400 watt, led light 40 watt, led light 65 watt, led light 85 watt, led. 20w led tube light; 40w led tube light; 50w solar street light setup (including 9m pole); 100w solar street light setup (including 13m pole); 9m high-mast light (with 4 bulbs); 13m high-mast light (with 4 bulbs); garden light (with panel box); solar light; 50w bulb holder; 3/4-inch pipe clamp set; 2-inch pipe clamp set; steelgrip tape; 40w led light repair; 50w led light repair; 60w led light repair; led. repair services (90w light, small/large torches, ceiling fans, wall fans, window coolers, 9-inch/12-inch exhaust fans, 1000w room heaters); modular boards (8-way, 12-way, 18-way); modular switches (6a, 16a); modular sockets (6a, 16a); standard switches (6a, 16a); standard sockets (6a, 16a); fan regulators (modular socket size, standard socket size, standard switch size); 3-pin plugs (6a, 16a); 2-pin plug (6a); sunmica boards (12x18, 6x8); taparia pliers; taparia tester; spanners (7 to 24, open-end & ring types); taparia screwdrivers (small, medium, large sizes); 150ah battery; 1100w inverter; screws (0.5", 1", 1.5"); tricolour decorative lights; drill machine; acs (1 ton, 1.5 ton, 2 ton); electronic fuses; electronic gloves; wire cutters; mixed nails; plastic wall plugs.

CTN :45673341

03 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For repair of tester for altimeter , repair of test bench for air speed indicator , repair of test bench for fuel content gauging system , repair of test bench for rate of climb tester , repair of test bench for pressure switches

Central Government/Public Sector

CTN :45543136

26 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : batery operated ground fault locator- megger make as per specification hg-pol-55 rev. 00. , primary injection kit as per specification hg-pol-57 rev. 00.

Primary Injection Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector