Get complete information related to latest Primer Sale Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Primer Sale Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Primer Sale Tenders.
Tender For supply of taking down cement plaster of any description on brick walls or concrete surfaces upto 15 mtr height including raking out joints comma hacking for key comma scrubbing down with water etc , m and l rendering 15mm thick rendering cement plaster in cm 1 by 6 over brick work or concrete surface finished even and smooth without using extra cement complete all as specified and as directed , m and l for rendering 5mm thick rendering in cement mortar 1 by 3 on concrete surfaces as in ceiling surface finished fair and smooth without using extra cement , m and l for rendering 15mm thick on fair face of brick or concrete surfaces upto 15m height and providing necessary scaffolding , complete removal of existing treatment by scrapping of walls comma chajjas comma ceilings comma fins comma facias using mechanical means with internal dust extraction system , material and labour for applying a layer of acrylic crack filler paste or similar material which can fill upto 5 mm cracks after widening cracks , providing and applying a layer of wall care putty in two or more coats over new oblique old decorated plastered surface to achieve smooth comma even finish surface suitable as required , material and labour for applying with 1 coat of interior primer over new oblique old which provides exceptional whiteness and opacity and ensures strong adhesion of the top coat. , material and labour for applying 2 coats of interior acrylic emulsion paint over new oblique old wall surface decorated surface having excellent scrub and peel resistance , material and labour for applying with 1 or 2 coats of acrylic waterproof exterior primer coating over new oblique old , material and labour for applying 2 coats of modified acrylic exterior emulsion over new oblique old decorated surface having excellent scrub and peel , providing and applying waterproof wall putty external surface in two or more coats over new oblique old decorated plastered surface to achieve smooth even finish surface , material and labour for applying 2 coats of interior acrylic emulsion paint over new oblique old ceiling surface decorated surface having excellent scrub and peel
Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars
Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - thermal power plant; work for supply and apply of one coat of epoxy primer red oxide and two coat synthetic enamel oil paint anti corrosive at various structure as pe..
Tender For supply of painting inspection and license renewal of fo storage tanks : : - supply of epoxy primer red oxide paint one coat for painting 1000 sq meter surface area , supply of synthetic enamel aluminium paint 02 coats for painting 450 sq meter surface area , supply of eu de nil paint one coat for painting 550 sq meter surface area , painting of fo tanks with structural platforms of surface area 1000 sq meter including scaffolding brushes turpentine oil etc , thermal insulation of steam pipelines including cost of material labour etc , arranging for peso and submission of fo license
Tender For supply of pallets to the attached drawing number icf/j&t/misc-3088, for storage of scrap sheet off cuts. painting condition as mentioned below. (this painting condition supersedes painting condition mentioned in the drawing) pallet to be painted with a) two pack epoxy primer, b) pu primer/undercoat and c) pu enamel topcoat. before application of the primer a good surface preparation like degreasing is to becarried out by washing or wiping with suitable solvent. thoroughly sand the surface with emery paper 180, so as to remove loose rust and wipe clean. apply 2 pack epoxy primer. before applying pu primer/under coat sand the primer with emery paper no. 400. wipe clean and ensure that the surface is free of particles. apply pu primer/under coat. before applying top coat, sand the pu primer/under coat with emery paper no. 400. wipe clean and ensure that the surface is free of particles. apply pu enamel topcoat (brands : asian or berger or indigo or dulux or nerolac). colour: ral 2004 (pure orange) shade. note: topcoat to be applied only after getting confirmation of the exact colour shade of the respective brand from the consignee. allocation: p 4175 4000 5000 j 004 000 [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : supply of two part sliding door arrangement for bcnhl wagons, to rdso drg.no.wd-11043-s-01,alt.2 or latest & wd-11043-s-02, alt.2 or latest, as per annexure -a, with one coat of zinc chrome primer paint [ warranty period: 30 months after the date of delivery ]
Tender For annual rate tender for purchase of materials of construction / road resurfacing for year 2026-27 - brick, sand, kapchi 25 to 40 mm, grit 6 to 10 mm, handmade metal 40 to 63 mm, rubble 9 inch, cement (53 grade) 50kg, tor steel, 60 mm rubber rise, m40 paver block, 80 mm rubber rise, m40 paver block, g.s.b., dust (powder), brick masonry (1:6), stone masonry (1:6), plaster (1:4), r.c.c. slab filling 1:2:4, (to give the price of steel separately in kg), r.c.c. slab filling 1:1/2:3 (to give the price of steel separately in kg), p.c.c. (1:3:6), p.c.c. (1:4:8), pointing (1:2), yellow soil, hard murrum, handmade metal, np3 pipe 300mm, np3 pipe 450mm, np3 pipe 600mm, np3 pipe 900mm, np3 pipe 1200mm, j.c.b machine (including diesel driver), roller (including diesel driver), truck (including diesel driver), hydraulic center trailer (including diesel driver), semi dense carpet patch work on various roads in pardi municipal area, building materials and soil lifting work from pardi municipal area, compounding of tarkhuta in pardi municipal area (excavation including five wire, cross wire, cement pole), waterproofing, two coat putty or two coat of primer (including brushing), wall painting (three coat) with plastic emulsion paint, ceiling painting (three coat) with plastic emulsion paint, outer wall painting (three coat) with weather proof acrylic emulsion paint including priming coat, box cutting the road surface to proper slope and camber for making a base for the road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 mt lead., scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm depth including stacking useful materials on road side and disposing off remaining stuff, construction of granular sub-base by providing well-graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix-in place method with rotavator at omc and compacting smooth wheel roller to achieve the desired density, complete in two layers as per technical specification clause 401., providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density in two layer. by mechanical means with 1 km lead, providing and laying bituminous base course 75 mm thick compacted in two layers with tack coat of asphalt (vg-30) 80/100 at the rate of 2.5 kg/10 sqmt and using b.t. stone aggregates of required gradation and asphalt 80/100 grade for mixing @ 1.99% by weight of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller including providing all materials, equipment’s, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 50mm thick compacted b.m. with b.t. aggregate as per mort&h specification and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and bitumen grade 80/100 for mixing at the rate 34.0 kg/m.t. i.e. 3.4% of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver censor finisher and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 25 mm thick compacted semi dense bituminuous concrete using stone chips as per mort&h gradation and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and 80/100 grade asphalt for mixing @ 5.0% by weight of total mix for binder including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibra