Latest primer coating Tenders | Government primer coating Tenders

CTN :41368445

28 Aug, 2025 NA

Liluah - West Bengal

Tender For supply of set of support complete for sliding door (lh & rh) for automobile carrier coach with side entry as per rdso drg. no. rdso/cg/drg/21015. one set consist of one no. of lh & rh each. item to be supplied with red oxide zinc chromate primer coating [ warranty period: 30 months after the date of delivery ]

CTN :41343628

21 Aug, 2025 NA

Himatnagar - Gujarat

Tender For supply of medicine dressing materials : : - diclofenec sodium 50 mg paracetamol 325 mg per strip 10 tab , grandopuro tel, nilgiri tel, turpine ka tel, peppermit satva, lavanga ka tel and color chlorophy , diclofenec diethylamine, linseed oil, methyl salicylate and menthol gel 30 mg , absorbent wound pad with metallic silver coating washproof size 70 mm x 19 mm , absorbent cottan roll bandage one roll size 5cm x 8 mtr , diclofenec diethylamine, linseed oil, methyl salicylate and menthol spray 55 mg

Central Government/Public Sector

CTN :41332548

16 Aug, 2025 34.80 Lacs

Ranga Reddy-T - Telangana

Tender For tender for supply of procurement of raw materials c c - austenitic type (303 se) free machining non-magnetic bright quality stainless steel hexagonal bar conforming to hal std 1206 / 303 se , astm a 582 / ams 5641 / ams 5640 type 2 / mil-s-7720 , 303 se / bs 303 s 41 , bs 970 / aisi 303 se size a/f 6 mm x 2 to 3 meters in length. , brass round hal std 1301 , is 319 , type-1 1/2hard , dia 4mm x 2 to 3 meters length , half finished brass material tube dia 4 x 0.5 of 1000mm hal std 1307/is407-81 grade cuzn37 , naval brass rods , condition annealed , conforming to is 291 1989 , grade 1 , / hal std 1302 / bs 2824 gr cz-112 , size dia 4mm x 2 to 3 meters in length , cold rolled brass sheet , strip& foil th cond half hardcuzn37 , is 410/c27200 , astm b36/cz108 , bs2870/cu zn 37 , cw508l-en1652-r350/ th. 0.2 mm , min. size 350 x 1200 mm. hal std 1300-hb. it should be protected with pvc coating morethan 50micro on both sides , cold rolled brass sheet , strip& foil th cond half hardcuzn37 , is 410/c27200 , astm b36/cz108 , bs2870/cu zn 37 , cw508l-en1652-r350/ th.0.4 mm , min. size 350 x 1200 mm. hal std 1300-hb. it should be protected with pvc coating morethan 50micro on both sides , rivetting quality brass wire conf.hal std 1303 , is 4413-cuzn-37 annealed condition dia 4mm , bare copper wire , condition annealed , conforming to hal std 6054 grade b / is 8130 / bs 128 / astm b-3 , size dia 0.5 mm in spools , alluminium alloy sheet , hal std 1252-1/2h , confirming to is gr 31000(ns3) is 737 en 573-3-3003 or 3013 , dh bs 1470 - 3103 h-14 (ns-3) - 1/2h (h4) , size thickness 1.0 x 1000 x 2000 mm with pvc coating on both sides. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 th.thickness 12 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std. 1250 , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 14 mm , min. size 1000x2000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 16 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy sheets , spec. 2014/2014 a-t6 /wp , cladding 1050 a /1070/19500/19700/6003 on both sides as per bs l165/bs l167 / en 4400- 2/en 2087/gr 24345-wp al.clad , is 3436/al.clad 2014 , astm b209/ams 4029 clad/hal std 1250 , th.thickness 2.0 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std.1250. it should be protected with transparent pvc coating morethan 50micro on both sides. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 6.0 mm , min. size 1000x2000mm , tolerances as per ansi h35.2/ hal std.1250. , one side/two sides polished(ra 0.2 micro m) non-fading black electro coloured anodized ( as per mil-a-8625 , type ii , class 2 ) sheet aluminium specification hal-1255 condition 3/4 hard or is737-19000- h6 size thickness 0.5 mm x 300mm x 300mm , ptfe/teflon round conforming to hal std 6251 mil-p-19468a or astm-d-1710 , grade-ii , type -3 , class-d dia 6 mm x 500 mm in length , nylon round type -66. dia 12 mm.hal std 1851 , glass epoxy laminated sheet , conforming to hal std 1807 , nemali -1- 98 , gr fr4 / bsen 60893 - 3- 2 epgc 202 / bs 3953 type ep4 / mil - 1 - 24768 / 27 type gee - f(fr4) size thickness 1.5 mm x 1220 mm x 1220 mm. , copper claded glass epoxy laminates conf. to ipc-4101 b/26 with tg greater than or equal to 170 degree c with 1 oz copper on bo

CTN :41314225

09 Aug, 2025 NA

Surat - Gujarat

Tender For carry out galvanizing coating work on m s pipe and round bar and other fabricated structural materials in connection with redevelopment of udhna station

CTN :41093511

11 Aug, 2025 33.42 Lacs

Murshidabad - West Bengal

Tender For procurement of steel materials required for erection and fabrication of new take up platforms and stairs - procurement of steel materials required for erection & fabrication of new take up platforms and stairs at tp-16, 17, 18 & 19, stage-ii chp, sgtpp, m.s. channel, 200 x 75 ( conforming to is 2062 min. length: not less than 6 mtr. make: sail/tata/jindal/rinl ), ismc 150, moc: ms ( conforming to is 2062 min. length: not less than 6 mtr. make: sail/tata/jindal/rinl ), ismb 250 mm ( conforming to is 2062 min. length: not less than 6 mtr. make: sail/tata/jindal/rinl ), angle 65x65x6mm structural steel # as per is-1977-1975(2nd rev) ( conforming to is 2062 min. length: not less than 6 mtr. make: sail/tata/jindal/rinl ), ms checkered plate,t06xw1250mm,l 6300 # ( conforming to is 2062 size: 6000/6300mm x 1250mm make: sail/tata/jindal/rinl ), pipe gi 32 nb heavy grade # is:1239 ( part 1 ) ( conforming to is 2062 min. length: not less than 6 mtr. make: tata/jindal ), gratings, galvanized, size:636mm x 294mm weight: 9 kg (approx.) ( depth: 25 mm weight of each gratings: 9 kg (approx.) the thickness of zinc coating over gratings shall not be less than 80 microns. drawing no: sgtpp/chp/mm/gi/gratings/stg1&2/stair-1 ), gratings, galvanized,size:1120mm x 825mm weight: 38 kg (approx.) ( depth: 25 mm weight of each gratings: 38 kg (approx.) the thickness of zinc coating over gratings shall not be less than 80 microns. drawing no: sgtpp/chp/mm/gi/gratings/stg1&2/stair-2 )

State Government

CTN :41325415

14 Aug, 2025 4.15 Lacs

Kalyani - West Bengal

Tender For emergent repairing work of mending potholes by pre coating materials for the jurisdiction of kalyani highway sub division of nadia highway division no ii, p.w roads dte during the year 2025 2026

Central Government/Public Sector

CTN :41323524

25 Aug, 2025 NA

Jodhpur - Rajasthan

Tender For supply of web to drawing no. le11313 alt a welded with top plate to drawing no. le11318 alt a. with r ed oxide zinc chromate primer coating. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41323538

25 Aug, 2025 NA

Jodhpur - Rajasthan

Tender For supply of set of member (one set consists of lh- 01 no and rh- 01 no) as per drg no le1131 6 alt 'a' (for lh) and le11315 alt 'a' (for rh). item to be supplied with red oxide zinc chromate primer coating. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :41326408

19 Aug, 2025 10.00 Lacs

Kasimpur - Uttar Pradesh

Tender For silver alluminium painting with primer coating on 11kv steel poles installed in the project colony and inside the plant area of htps kasimpur aligarh

Central Government And Public Sector

CTN :41279896

08 Aug, 2025 NA

Dibrugarh - Assam

Tender For supply of hex head bolt m16x90 high tensile materials and specification as per is:1364(part-1)- 2002,ce-with property class- 10.9 to is:1367(part-3)-2002, coating as per mdts-057, packing ins truction - pi042 make:-tvs/tuff/dfl/unbrako and all approved vendors for axle end steel high tensile ca p screws to be used in end holes of bg freight axles ( item id-3100249, sub item id 3100249002 or 3100 249003) borne in the rdso approved vendor list available on uvam portal. [ warranty period: 30 mont hs after the date of delivery ]

Primer Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government And Public Sector