Tender For - r/ mtc. of rws/jjm schemes/ s.h.: providing & fitting fixing of electrical accessories, spare of panel board of different water supply schemes at different locations under hrishyamukh rd block under dws sub-division, belonia during the year 2026-27. - providing and fitting fixing of spare contact kits without coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., providing and fitting fixing of standard operating coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., supplying and fitting fixing of 4 pole ac control contactor (nhd series) suitable for bch made starter (standard coil voltages are 24, 110, 220/240 & 380/415 v, ac hz)., supplying and fitting fixing of 3 pole power contractor (type-mnx) suitable for 10 hp to 25 hp motor.mnx-25 (for l&t made starter), supplying and fitting fixing of pneumatic timer pn type delay relay-electro pneumatic) suitable for delay of time upto 30 sec. (bch made)., supplying and fitting fixing electronic timer type st-100 (l & t make) suitable for 240/300/415v, 50 hz having ranges for 3-30 secs/12-120 secs., supplying and fitting fixing of single phase preventer on delay 2 sec off delay 7 sec 65 vac asymmetry., providing & supplying of kit-kat rewireable porcelain fuse (cut-out) carrier & base of havells made (delux quality)., a) 63 amps/415 volt, b) 100 amps/415 volt, supplying and fitting fixing of 3 pole power contractor (type-ml) suitable for 10 hp to 25 hp motor.type ml-2 (for l&t make starter), supplying and fitting fixing of thermal timer type gt-200 (l & t make) suitable for 230/250v, 360v, 400/440v, 50 hz for 5-18 secs., supplying and fitting fixing of thermal overload relays mn2 type (directly operated& direct mounting on mnx 9-40 contactor) of l & t made. (suitable for ml/mnx type)., a) for relay range 9-15 a., b) for relay range 14-23 a., c) for relay range 20-33 a., supplying and fitting fixing of thermal overload relays (directly operated& direct mounting on ml-2/3 contactor) having relay range 9-14a/13-21a of l & t made. (suitable for ml-2/ml-3 type)., supplying and fitting fixing of citation-m overload relays (direct mounting with built in single phase protection) having relay range of bch made., a) for relay range 8.9-13.5 a., b) for relay range 13.2-30.00 a/17.4-24.00 a., c) for relay range 22.00-30.00 a., providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) gamair wood/ plywood pannel board for fitting fixing of electrical items, in/c 2 nos ms angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the engineer-in-charge., providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the engineer-in-charge., providing and fitting fixing heavy duty box type (resin filled) power factor correction capacitor l & t make etc. complete as per specification and direction of the engineer-in-charge.i) 5-15 kvar 440 v, supplying isi marked/ taparia make tools for water supply scheme., i) sly wrench, ii) screw driver, iii. pipe wrench, iv. plier, v. hexo frame with blade, providing and fitting fixing of moving iron type, range 0-500 v, 96 mm x 96 mm size ac volt meter ( l & t / ae make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the engineer-in-charge., providing and fitting fixing of moving iron type, range 0-100/0-200 amp, 96 mm x 96 mm size ac amps meter direct reading type ( l & t / ae make) with selector switch and ct coil as a electrical instrument of the pannel board as per specification and direction of the engineerin-charge., providing and fitting fixing stee
Tender For a mtc of ephs in sector 34 at ambala cantt providing and fixing of power correction capacitors with cabling cl specials nrv sluice valve panel board etc at various sites at sector 32 and 34 ue various tube wells and temporary disposal etc ambala cant
Tender For battery charger and discharging panel : "supply and commissioning of digital signal processing (dsp) controlled igbt based ac to dc rectification (converter) with active power factor correction with fine control on voltage regulation, ripple, thd and improved efficiency with re-generative feature suitable to provide float charging and boost charging of ni=cd battery 199ah/110v capacity.the technical specifications are as per enclosed annexure. [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : rectification of 380 kvar power factor correction panel (apfc) at serampore ssh, hooghly - “rectification of 380 kvar power factor correction panel (apfc) at serampore ssh, hooghly”
Tender For battery charging and discharging panel : supply and commissioning of digital signal processing (dsp) controlled igbt based ac to dc rectification (converter) with active power factor correction with fine control on voltage regulation, ripple, thd and improved efficiency with re-generative feature suitable to provide float charging and boost charging of ni-cd batteries of 199 ah/110 v capacity and lead acid batteries of 75 ah/110 v capacity. as per scr els/kzj specifications no. c/e.els/kzj/spec/06 copy attached make: signotron/hbl/microtek/amarraja or equivalent. [ warranty period: 30 months after the date of delivery ] ]
Tender For battery charging and discharging panel (station/table):supply, creation, installation and commissioning of digital signal processing (dsp)controlled igbt based ac to dc rectification(converter) with active power factor correction with fine control on voltage regulation, ripple, thd and improved efficiency with re-generative feature suitable to provide float charging and boost charging of ni-cd batteries of 199ah/110v capacity & lead acid batteries of 75ah/110v capacity as per spec and as per enclosed drawing no. sig/cd/1750/mech/01 for proper maintenance and handling of batteries in battery room. [ warranty period: 30 months after the date of delivery ] ]
Tender For bid to ras bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , supply of power distribution panel 400a, 415v. the panel indoor type floor mounted and free standing designed for ip-4x ingress protection, made of crca sheet steel. , supply only pf correction panel with svg 430kvar. 415v panel indoor floor mounted, free standing with ip-31 degree of ingress protection made of crca sheet steel , material and labour for pvc insulated, lt unarmoured sheathed frlsh electric sense cable with copper multistanded conductor 1100 volts grade, cross-sectional area 4 sqmm, 6 core , material and labour for chemical earthing complete with copper bonded 250 micron electrode 1500mm long and 25 mm dia , materal and labour for earthing complete with gl earth plate 600mmx600mmx6mm thick electrode buried directly in ground vertically to a depth not less than 2.25 meter , material and labour for earth continuity conductor drawn through conduit by pipe or fixed to pole or any other indicated situation for loop earthing 20x3mm galvanised iron or steel wire , material and labour for earth continuity conductor drawn through conduit by pipe or fixed to pole or any other indicated situation for loop earthing 32x6mm galvanised iron strip , supply and fixing 40 mm interconnecting pvc pipe sets and pipe fittings along with suitable accessories complete all as specified and directed , material and labour for rcc 1-2-4 type b-1, using 20 mm graded stone aggregate as in foundation, including rafts, footing, foundation beams, , material and labour for steel reinforcement for concrete with ms tmt bar 10mm dia and over cut to length, bend to shape required including cranking, bending, , warranty service amc by cmc including breakdown service for 5 years to ensure the safe, reliable, and efficient operation of the electrical panel ) /bid number : gem/2026/b/7493324 * /dated: 08-05-2026 & & / bid document 1 / 17