Latest programmer switch Tenders | Government programmer switch Tenders

State Government

CTN :40985775

25 Aug, 2025 1.50 Crore

Mohali - Punjab

Tender For corrigendum : purchase of gym for strength and conditioning equipments - endurance sectiontreadmill1. machine must be designed for running with heavy duty 4 hp motor.2. should have low start up speed: 0.5 kmph or lesser.3. should have incline increments of 1% or lesser.4. low step height: 7 or lower.5. speed range: 0-20 kmh or more.6. incline: 0-15% or more.7. max user weight: 180 kgs or more.8. belt size : 61 x 22 or more9. should have at least 10 preprogrammed protocols with option for heart rate range control10. led console with feedback for time distance, calories burnt, heartrate, incline, track and more product should have en-957 or astm certification for stationary fitness equipment, curved non- motorized treadmill (self- powered)1. curved non-motorized treadmill should be capable of training the body s all energy systems as a comprehensive system, capable of offering sprinting for aerobic power development2. curved non- motorized treadmill (self powered) should be capable of offering the sports persons to experience a full speed resistance spectrum.3. variable resistance: the curved non- motorized treadmill (self powered) system should have requisite advanced drive technology enabling users to select different levels of reactive resistance, from zero to max. by simply shifting the drive control system, rehab athletes can quickly switch from resistance-free running to an all-out sled push.4. increased metabolic rate: walking with resistance on said curved non-motorized treadmill (self powered) training system should be capable of enhancing energy expenditure significantly compared to walking at the same speed on a traditional treadmill or a non- motorized treadmill without resistance.5. maximum muscle activation: ergonomic design of the curved non-motorized treadmill (self powered) training system should lead to significantly higher activation of the posterior kinetic chain muscles, particularly the glutes and hamstrings, compared to traditional treadmills.6. curved non-motorized treadmill (self powered)- training system should be capable of being operated and controlled exclusively by the force applied / generated by rehab athletes. in order to speed up, provision should be there, where rehab athlete can move to the front of the surface and to slow down, rehab athlete can move to the back of the said treadmill. provision must be there where the training system can be accelerated quickly from a cold start and matches upto the same pace as the rehab athletes intends to attain. the said system should offer an ideal solution for an eco-sustainable facility, by reducing electricity costs and carbon footprint.7. training system should have requisite technology, ergonomic design and advanced engineering solution so that rehab athletes can work hard in a completely safe training environment.the ergonomic design combined with the high- quality components and materials should be of solid, compact product with a versatile nature that endures well to suit high intensity prolong training sessions to ensure maximum durability and reliability.8. provision for proper posture control:the ergonomic design of training system promotes the correct alignment of the ankles, knees, hips and back, so that user can maintain natural posture at all- times and avoid joint and knee stress, regardless of their height and weight. system should offer the provision of simulating the experience of walking/running uphill while preserving the correct biomechanics.9. accessory kit: the training system must be provided with accessory kit which allows for a variety of pulling and pushing exercises through handles or a waist belt.10. technical specifications:a) dimensions range (lxwxh)*:190-200cmx86- 95cmx150-160cmb) console type: a minimum of 6-7 lcd display with back lightc) power supply: lps 5v wall supplyd) power requirement: 200 - 240 v (should comply with standard indian electrical system)e) resistance control: should have magnetic resistance with a min

State Government

CTN :40985778

25 Aug, 2025 1.80 Crore

Mohali - Punjab

Tender For corrigendum : purchase of sports physiotherpy lab equipments - focused shockwave therapy the device should be suitable for musculoskeletal use. should be a focused shockwave based on piezo mechanism. should have multi array type piezo electric hand piece. should have accuracy of the shock wave generation cycle(frequency)0~8 10% should have software-based operating system the unit should have large color touch screen for ease of operation. the unit should have accuracy of the operating frequency 0~7000shock 10% the unit should have maximum energy density 0.702 m j/ (when setting at 23 levels) 15% should have shock wave penetration depth 40 20%. should have maximum focus size. 78 1.78 15.81 20% should have maximum pressure 44.01 0.65 mpa the unit should be supplied with piezo hand piece and elastomer gel padas of 8 different sizes, 5mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, and 44mm. the life span of hand piece should be of up to 10 million shocks. should be supplied with trolley with castor wheels. dimension of the device should be approximated 500mmx700mmx 1000mm should have ce or usfda certified., high laser therapy should be class iv high level laser therapy system should have a real-time operating system technology should have maximum laser should be class iv high level laser therapy system should have a real-time operating system technology should have maximum laser power output of 15 watts should have wavelengths of 810 nm & 980 nm should have an aiming beam of 650nm, should have 2 operating modes: continuous wave or pulsed applicate and piece should have embedded finger switch and light, should have a technology to customize patient treatment based on conditions, body area, body type, skin type, chronicity and absorption characteristics applicator should have a fused silica composition massage ball at the point of contact of applicator and skin. pulse frequency: 2, 10, 20, 100, 200, 500, 1000, 2500, 5000 & 10000hz pulse duration: 50% duty cycle at any given pulse frequency setting, should have a 10 hd display touch screen with password protection to reach the home screen should be supplied with 2nos. of laser protection glasses power: 100-240v, 50-60 hz the unit should be supplied with 5 different types and sizes of treatment heads (large cone, large massage ball, flat window, small massage ball, and small cone. the unit should have inbuilt battery. electrical safety class: class i, type b weight should not exceed 4 kilograms (main unit; without applicators & accessories. must have class iii also., combination therapy machine with vaccum should have 3 independent electrotherapy channels, one ultrasound channel should provide multiple clinical waveforms including interferential (2 and 4 poles and isoplanarvector), tens (asymmetric biphasic &symmetric biphasic), han, russian, vms, surged(rectangular &triangular), hvpc, microcurrent, galvanic (continuous, interrupted and low level),rabert & dia dynamic cpid/cpiso should have independent parameter adjustments for each channel including intensity, frequency, duty cycle, vector scan, channel mode, phase duration, ramp, cycle time and treatment time based on waveform should have maximum output intensity up to 140ma should have constant current and constant voltage modes should have 2 colour coded lead wires for easy picking of selected channels should have suggested electrode placement guidelines ultrasound should offer 1 and 3 mhz frequencies should have the ultrasound bnr of 5:1 or lesser should be supplied with one 5cm applicator head should have pulsed & continuous frequency modes (10%, 20%, 50% & 100%) should have variable duty cycles of 16 hz, 48 hz &1 bb 00 hz should have facility to indicate applicator uncoupling should be able to use electrotherapy and ultrasound independently and also in synchronizedcombination of electrotherapy and ultrasound, where ultrasound head functioning as bothultrasound head and electrode should have minimum

State Government

CTN :40985783

25 Aug, 2025 1.50 Crore

Mohali - Punjab

Tender For corrigendum : purchase of sports exercise physiology lap equipments - cardiopulmonary exercise testing system system should be compact can be used in laboratory operation and low maintenance costs and easy servicing. system should be state of the art computerized telemetry breath test analyzer for on-line breath by breath measurement of exercise test of respiratory system to measure following parameter: time, ve, bf(rr), hr, feo2, feco2, peo2, peco2, vo2, vco2, ve/vco2(eqco2), ve/vo2(eqo2), rq(rer), vd/vt, vo2/kg, vo2/kg/hr, met, watt(work), hr, ttot, ti, te, ti/te, ti/ttot, pef, pif, br, vet, sum, tv/te, o2 kinetics, oxygen deficit, oxygen debt parameters and indirect calorimetric. wireless hr recording system, indirect cardiac output by wassermann algorithm system should comply ats and ers guide line and it should be ce certified., iso certified system should have automatic ambient conditions measuring system. system should work under temperature range 0 to 50 celsius. system should have facility for automatic calibration of analyzers. volume transducer calibration with precision calibration syringe. system should meet following technical specification flow rate measurement: measuring headpiece should be either through turbine /dvt/ pneumotach and dead space less then 40 ml, it should not be affected by humidity , flow range +/- 18 l/s and accuracy 2% oxygen analyser : should be either electrochemicalcell/paramagnetic and measurement range 0- 100 %,response time t90 100 ms and accuracy +/-0,04 % and- resolution 0,02 %carbon dioxide analyser : should be ndir (infraredabsorption) and measurement range 0 - 10 %,-response time t90 90 ms , accuracy +/- 0,04 %, andresolution 0,02 % software should support latest windows or latest andin corporate customized predicted normal equations.software should be capable of changing graphics displays during real time testing. system should have facility for automatic treadmill or bicycle ergo meter control. should be supplied with software, standard accessories for operation manual carrying case for field use. system should be supplied with latest data acquisition system, deskjet printer and ups. system should comply en iso 13485:2003, en iso 9001:2000, ec certificate93/42/eec, programmable treadmill running machine with user terminal (display &keyboard) stand- alone and remote control via rs232 running surface: l:170 cm (minimum), w: 65 cm (minimum) maximum possible load: 200 kg (440 lbs) speed range: 0-40 km/h elevation: 25% (14 maximum elevation) motorized adjustment, reverse belt rotation. motor system 3.3 kw, single phase ac motor, maintenance free and brushless power transmission: frequency inverter, poly v- belt, very quiet operation safety system: emergency-off safety stop switch (safety lanyard with actuator, pull cord and clip); potential equalization bolt; transformer for potential-isolation from the mains ambient condition: temperature: +10to +40 degrees c, humidity 30 to 70% display (resolution): lcd display heartrate monitoring: wireless transmitter; the treadmill should be able to interface with well-known compatible metabolic gas analyzer as per standard and custom exercise protocols different programs safety harness-1. indispensable accessory for stress testing, accident prevention and for the general safety of athletes.2. safety arch with different heights and widths to fit all running machines.3. an emergency stop at the crossbar of the safety arch allows automatic stop of the running belt in the moment a fall occurs.4. the harness and chest belt (available in 5 sizes: xxs, s, m, l, xl) secure the subject and prevents falling over to the front.5. chest belt straps do not pinch or restrict the athlete", programmable ergometer functional design and excellent stability, load up to 160kg. easy to use saddle, handle bar and pedals speed independent and dependent power control handle bars are easy to change to suit different tests, rotatable by 360 degrees. mechanical/motor-a

CTN :41136016

16 Aug, 2025 3.32 Crore

Uttara Kannada - Karnataka

Tender For tender for supply of ring sealing , relay control 110v50hz , valve charging , protection of motor 4050a , impeller of pump , sealing of pump shaft , filter coarse 23172321 , set for maintenance of shaft seal , regulator suction pressure pre21e , sensor oil level , pressure transmitter 14 npt aks 32r , sealing of mechanical shaft , bearing 63122rs jc3 , coupling l017 l275 , switch overload 500a , grease polyrex em , sensor of temperature , sensor of temperature , lamp shockproof , button shockproof , button shockproof , button shockproof , relay pressure differential , ring sealing 4234x1 , element of thermoregulating valve , valve expansion te mop10 , sealing of shaft , pump oil , coil 110v , coil 110v , gasket of delivery branch pipe dn150 , pistonspindle , solenoid control block for loading unloading , valve plate set 08436 , ekc 316a superheat controllers , solenoid valve coil 018f6711 , oil filter element pi 3145 smx 1010 77680374 , oil filter o ring kit , quantum panel hd , rodseal , rodseal , slyd ring , pistonslide stop , glyd ring , assembly linear transmitter long stroke , valveslide , stopslide , expansion valve , temp sensor aks 21w pt1000 , evaporation panel for expansion valve , screw driver set , sight glass 08130 , gasket set 08072 , oil sump heater assly 08425 , rear bearing set 08157 , oil strainer 08456 , safety valve 08459 , piston set 08035 , crankshaft 08056 , oil pump assly 08044 , connecting rod assly 08307 , front bearing set 08164 , valve plate set 08498 , piston con rod set 08491 , shut off valve 08398 , contactor compressor starter a2603011 , lamp hd white 15fa611 400 r1005 , lamp hd blue 15fa611 400 r1004 , switch assy 3p 800a oetl800k3 , switch assy 3p 400a oetl400d1 , mccb 3p 800a isda010826ri , discharge temperature 017500366 , suction pressure switch with reset 0175001 , solid state time relay 3rp15 051aq30 , simatic hmi panel 3vn17211ba330aa0 , mdac contactor , flow swith , oil temperature relay , motor 11kw415v3ph2 pol nssii80723

CTN :41236009

14 Aug, 2025 7.11 Lacs

Kajora - West Bengal

Tender For supply of shunt trip assy complete 110300 , arc chutes aci , ammeter am , glass fuse with holder bogf , indicating lamp with pcb mounting lab9tsuht , earth leakage 50- 750ma with time lag elm7lats , core balance transformer cbt90m , indicating led poo43 , hrc fuse 16a 13816 , contactorbo25 , thermal overload relay with block mc305ana3k , hrc ht pt fuse boabwna , voltmeter vmso65 , indicating lamp lab9tsuht , vcb closing coil 501000 , vcb shunt trip coil 500500 , vcb limit switch off delay timmer bota2dt2 , neutral monitoring relay with resistance 100v ac nrmr , overload relay magnetic olr3 , core balance transformer cbt90m , pilot relay pru3pru11 , thermal overload assy 120021 , spring cane roller a028 , aux contactor with coil 110v 2no 2nc boca2dn1229 , under voltage coil for ocb 11kv 400amp k4ocb2 , search and lockout relay lsk2000 , single phasing preventor with module spp5cmsp , magnetic overlaod relay 120310 , core balance transformer cbt80m , indicating lamp lab9vcb33 , control fuse bokudf4 , indicator panel lab933 , aux contactor 110v boca2dn1319 ) /bid number : gem/2025/b/6504717 * /dated: 28-07-2025 & & / bid document 1 / 42

CTN :41359916

28 Aug, 2025 2.50 Lacs

Chittoor - Andhra Pradesh

Tender For supply of transformer maintenance supply installation of earth pits shunt capacitor ab switch acb pfcontroller : : - one time maintenance off 315kva transformer , supply and installation of horizontal 3 phase 11kv 400amp gang operated air break switch , supply and installation of 1000a 4 pole air circuit breaker , supply and installation of copper bonded chemical earth pits , supply and installation of copper plate earth pits , supply and installation of shunt power capacitors of the self healing type for ac systems , supply and installation of automatic power factor controller , supply and installation of lighting arresters for 11kv sub station

CTN :41329827

16 Aug, 2025 NA

Thiruvarur - Tamil Nadu

Tender For supply of kit nitrogen charging , presuure switch , stake earth anchor , space tie stake , terminal block tb2 , coupling quick disconnect female , cylindrical rubber mount , jack swivel , charging valve , hpu pump , cable assy guy wire , suspension cable , shock absorber , chain oroller , sight gauge , lock washer , screw hex hd cap , tee str thd , hose assy , reflector amber , ve battery cable 840 long , worm dtrive clip 5 8 to 7 8 , worm dtrive clip 7 8 to 9 8 , 3 worm drive clip , wire lock 41 nom ap , hitch pin clip , relay 24v dc10a , grease nipple , foam , pump coupling , relay , synchronising assy , protector gauge , hour meter , winch cable , shear bolt , coax cable assy antenna , shackle chain , time delay , transformer t 2 , tension cable , seal , motor coupling , trailer light system cable assy , wire rope clip , a c relay , expansion shield double 3 8 bolt , fuel filter , solenoid valve 4 way ) /bid number : gem/2025/b/6477185 * /dated: 05-08-2025 & & / bid document 1 / 37

CTN :41115056

22 Aug, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of 24brsc003 spares of various type of ro plant d d - pressure gauge , pressure gauge , servo motor control valve , pressure gauge , strainer support care , solenoid valve brass 1 2 f 3 way , pressure switch , level switch , thermister overload relay , running time meter , processor control unit , impeller , pressure guage 0 100 bar , air pressure , prefilter pump shaft seal , filter pump shaft seal , neck ring , split cone with nut , gasket 38 3 mm , spacing pipe , abs service kit , hp motor bearing nde , oil seal , oil filler cap , oil drain kit , box mounting assembly , pressure spring , neck ring p 45 , mechanical seal p 105 , sleeve gasket p 37 , neck ring p 45 , o ring , prefilter pump , bearing hp pump , anode plug , valve kit , seal kit , seal kit , valve kit , anode plug , seal ring charging screw , o ring for head distributor assembly , o ring cartridge filter housing , cartridge filter element , check valve d25 , ball valve 2 way 20mm , abs ball valve 2 way 25 mm , abs ball valve 2 way 32 mm , pu9 pipe , pipe clamp 32 mm 2 bolt , ball valve ss316 1 2 bspf wp 70 bar , valve electromagnetic , thermostat , control transformer , pressure gauge 0 10 bar , low pressure gauge 0 60 bar , highpressure gauge 0 100bar , rubber hose 20mm , lp hose 25mm idx1 bspmx500l ss316 , lp hose 32mm , hp flexible hose , high pressure hose module outlet , hp pump crank case oil , jubilee clips 00 13mm to 20 mm , ss jubilee clips 2x 45 mm to 60 mm , dolomite , cleaner for membranes 11 , membrane cleaner 22 , membrane cleaner 33 , 1 4 fxpu4 elbow , rubber hose from c f outlet to hp pump inlet 20 30tpd , high pressure pump driving belt set 5 nos , ss service kit rosm 03 tpd , a v mount for hp pp trolly , a v mount for hp pp trolly , sleeve support ring p30 43 130 , shim 1 2 circle bearing case , connecting rod assebly , support bracket , dt module service exchange 3 tpd ssk subs , spare kit d t module o2101 , dt module service exchange 5 10 20 30 tpd opv , o ring oil filler cap , hp flexi hose connecting hp disch press gauge disc , membrane filmtec sw302521 , hp hose of module in

State Government

CTN :41333620

12 Aug, 2025 41.38 Lacs

Bikaner - Rajasthan

Tender For purchase of various testing general apparatus (lab equipment) in quality control labs for all zone - flash and fire point apparatus: supply , installation & commissioning of pensky-martens closed & open tester electric operated apparatus for determination of flash & fire point of tar & bituminous material as per is:1209-2021 using method a,b & c . the complete apparatus and its accessories shall be supplied, which shall confirm as per is:1448 (part-21) -2012 /iso 2719-2002 & is: 1448 (part-66)-1969 (reaffirmed 2003) and the complete item shall be supplied as per direction of engineer in charge . the appartaus shall include :-brass or copper test cup capacity 50 ml. with tight fitting lid. stirring mechanism (motorized), flame application device with shutter , electrically heated base with adjustable heating rate (1 - 6 c per minute) , standard thermometer (0 to 370 c) , heavy duty stand with insulated housing with 3.0 metre power cord & power plug etc complete. rates are inlusive of all taxes ., vibrating machine with 7.06 cmx7.06 cm x7.06 cm cube moulds :-supplying , fixing and commissioning electric operated vibrating machine with mould confirming to is: 10080-1985 (reaffirmed 2004) which shall be capable for compaction of cement mortar cube required as per is:4031. the complete frame assembly shall consist of device to hold a 7.06 cm mould to feed the sample in a mould. vibrator shall be mounted over coiled spring to carry the cube mould and vibrations are developed by mean of a revolving eccentric shaft. instrument shall be fitted with belt guard. electric motor of any reputed company is driven by an endless belt running on a crowned pully on the vibrating machine. digital time shall be also be fitted with digital timer and switch for ease of operation.main key features & technical specification of machine & accessories shall be as under :-- frequency of vibration :- 12000 + 400 rpm- power supply :- 230 v , 50 hz , ac supply single phase- motor capacity :- min. 3/4 hp , 2800 rpm- cube mould for cement (6 nos with base plates ) :- as per is:10080, size 7.06 cm x 7.06 cm , weight of mould shall be 2.8 + 0.2 kg of msinstrument supply shall include standard sand gr.-i, ii & iii , cube mould , poking rod , mortar mixing plate , suitable power cord min. 3.0 mtr long with power plug etc. the complete item shall be supplied as per direction of engineer in charge . rates are inlusive of all taxes ., vicat needle apparatus :-supply of vicat apparatus complete set confirming to is:5513-1996 suitable for determining the consistency, setting time , soundness of cement & standard consistency as per is 4031. the apparatus shall consist of a metallic frame with movable rod carrying interchangeable attatchments , consistency plunger (polished brass having dia 10 + 0.05 mm, length 50 + 1 mm with lower edge flat) initial setting needle (dia 1.13 + 0.05 mm ) final setting needle (with annular collar ) and a conical mould (top diameter 70 0.5 mm, bottom diameter 80 0.5 mm, height 40 0.5 mm.) . the plunger assembly shall allow free vertical movement and include a graduated scale for measuring penetration depth . the apparatus shall be supplied with a glass base plate.apparatus shall include , gauging trowel, stopwatch, all accessories shall be supplied in a protective box and as per direction of engineer in charge .rates are inlusive of all taxes ., gi sieve set 45 cm.dia with lid & pan (complete set) :-supply of is sieve set for coarse aggregate having dia of 45cm made of gi sheet with seamless welding. each sieve should having rounded edges at top for safe operation. each sieve must be of tight fitting to each other. sieves set finishing & sizes shall comply is 460-2020 and as per direction of engineer in charge.rates are inlusive of all taxes . each set consists followings :-125mm, 100mm, 90mm, 80mm, 75mm, 63mm, 53mm, 50mm, 45mm, 40mm, 37.5mm, 31.5mm, 26.50mm, 25mm, 22.40mm, 20mm, 19mm, 16m

Central Government/Public Sector

CTN :41354579

21 Aug, 2025 NA

Nanded - Maharashtra

Tender For running contract for manufacture and supply of pre-stressed monoblock concrete sleepers , pre-tensioned type for broad gauge 1673 mm, for derailing switch to drg. no. rdso/t-6068 (alt.4) or l atest with reference date as tender closing date, for general layout and part drawings thereof to latest al teration to suit 60kg/52kg uic rail, both fan shaped, as per rdso design, drawings and irs specification no. t-45, 4th revision march, 2021 as amended from time to time or latest with reference date as tende r closing date and all the psc sleepers for turnouts duly loaded into wagons/road vehicles. ]

Programmer Switch Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government/Public Sector